NFPA 654 : 2020

Chapter 1 Administration 1.1 Scope.1.2 Purpose.1.3 Goal. 1.4 Application.1.5 Conflicts. 1.6 Retroactivity.1.7 Equivalency. 1.8 Units and Formulas.Chapter 2 Referenced Publications 2.1 General. 2.2 NFPA Publications.2.3 Other Publications.2.4 References for Extracts in Mandatory Sections. Chapter 3 Definitions 3.1 General. 3.2 NFPA Official Definitions. 3.3 General Definitions.Chapter 4 General Requirements 4.1 Owner’s Obligation.4.2 Objectives.4.3 Compliance Options.Chapter 5 Hazard Identification 5.1 Hazard Identification. Chapter 6 Performance-Based Design Option 6.1 General Requirements.6.2 Performance Criteria.6.3 Design Scenarios.6.4 Evaluation of Proposed Design.Chapter 7 Dust Hazards Analysis (DHA) 7.1 General Requirements. 7.2 Hazard Assessment. Chapter 8 Management Systems 8.1 Retroactivity. 8.2 General. (Reserved) 8.3 Operating Procedures. 8.4 Housekeeping Procedures and Portable Vacuum Cleaners. 8.5 Open Flames and Sparks (Hot Work). 8.6 Personal Protective Equipment (PPE). 8.7 Inspection and Maintenance. 8.8 Employee Training and Procedures. 8.9 Contractors and Subcontractors. 8.10 Emergency Planning and Response. 8.11 Incident Investigation. 8.12 Management of Change. 8.13 Document Retention. (Reserved) 8.14 Management Systems Review. (Reserved) 8.15 Employee Participation. (Reserved) Chapter 9 Hazard Management: Mitigation and Prevention 9.1 Process and Facility Design. 9.2 Building Design.9.3 Equipment Design.9.4 Ignition Source Control. 9.5 Pyrophoric Dusts. (Reserved)9.6 Dust Control.9.7 Explosion Prevention and Protection. 9.8 Fire Protection. Annex A Explanatory Material Annex B Explosion Protection Annex C Informational Primer on Spark Detection and Extinguishing Systems Annex D Dust Layer Characterization and Precautions Annex E Deflagration Propagation Isolation Methods Annex F Use of Water as Extinguishing Agent for Combustible Particulate Solids Annex G Informational References