|
ISO 3016:1994
|
Petroleum products Determination of pour point
|
|
DIN 51811:2013-11 (Draft)
|
TESTING OF LUBRICANTS - TESTING OF CORROSIVENESS TO COPPER OF GREASES - COPPER STRIP TARNISH TEST
|
|
DIN 51418-2:2015-03
|
X-RAY SPECTROMETRY - X-RAY EMISSION AND X-RAY FLUORESCENCE ANALYSIS (XRF) - PART 2: DEFINITIONS AND BASIC PRINCIPLES FOR MEASUREMENTS, CALIBRATION AND EVALUATION OF RESULTS
|
|
DIN 51777-2:1974-09
|
TESTING OF MINERAL OIL HYDROCARBONS AND SOLVENTS; DETERMINATION OF WATER CONTENT ACCORDING TO KARL FISCHER; INDIRECT METHOD
|
|
ISO 3675:1998
|
Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method
|
|
ISO 11007:1997
|
Petroleum products and lubricants Determination of rust-prevention characteristics of lubricating greases
|
|
DIN 51451:2004-09
|
TESTING OF PETROLEUM PRODUCTS AND RELATED PRODUCTS - ANALYSIS BY INFRARED SPECTROMETRY - GENERAL WORKING PRINCIPLES
|
|
ISO 6743-99:2002
|
Lubricants, industrial oils and related products (class L) Classification Part 99: General
|
|
DIN 51418-1:2008-08
|
X-RAY SPECTROMETRY - X-RAY EMISSION- AND X-RAY FLUORESCENCE ANALYSIS (XRF) - PART 1: DEFINITIONS AND BASIC PRINCIPLES
|
|
ISO 5659-2:2017
|
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
|
|
ISO 7120:1987
|
Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water
|
|
ONORM EN 15427 : 2010
|
RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - FLANGE LUBRICATION
|
|
DIN 51810-1:2016-09 (Draft)
|
TESTING OF LUBRICANTS - TESTING RHEOLOGICAL PROPERTIES OF LUBRICATING GREASES - PART 1: DETERMINATION OF SHEAR VISCOSITY BY ROTATIONAL VISCOSIMETER AND THE SYSTEM OF CONE/PLATE
|
|
DIN 51817:2014-08
|
Testing of lubricants - Determination of oil separation from greases under static conditions
|
|
ISO 2137:2007
|
Petroleum products and lubricants Determination of cone penetration of lubricating greases and petrolatum
|
|
ONORM EN ISO 3104 : 1997 AC 1999
|
PETROLEUM PRODUCTS - TRANSPARENT AND OPAQUE LIQUIDS - DETERMINATION OF KINEMATIC VISCOSITY AND CALCULATION OF DYNAMIC VISCOSITY
|
|
ISO 2160:1998
|
Petroleum products Corrosiveness to copper Copper strip test
|
|
ISO 20623:2003
|
Petroleum and related products Determination of the extreme-pressure and anti-wear properties of fluids Four ball method (European conditions)
|
|
DIN 51398:1983-07
|
TESTING OF LUBRICANTS; PROCEDURE FOR MEASUREMENT OF LOW TEMPERATURE APPARENT VISCOSITY BY MEANS OF THE BROOKFIELD VISCOMETER (LIQUID BATH METHOD)
|
|
ISO/TR 5659-3:1999
|
Plastics Smoke generation Part 3: Determination of optical density by a dynamic-flow method
|
|
DIN 51820-1:1989-02
|
TESTING OF LUBRICANTS; ANALYSIS OF GREASES BY INFRARED SPECTROMETRY; TAKING & EVALUATING AN INFRARED SPECTRUM
|
|
ISO 12185:1996
|
Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method
|
|
ISO 6072:2011
|
Rubber Compatibility between hydraulic fluids and standard elastomeric materials
|
|
DIN 51805:1974-08
|
TESTING OF LUBRICANTS; DETERMINATION OF FLOW PRESSURE OF LUBRICATING GREASES, KESTERNICH METHOD
|
|
ONORM EN ISO 1183-1 : 2013
|
PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012)
|
|
ISO 3733:1999
|
Petroleum products and bituminous materials — Determination of water — Distillation method
|
|
ISO 9772:2012
|
Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame
|
|
ISO 3146:2000
|
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
|
|
ISO 1183-1:2012
|
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
|
|
DIN 51350-5:2015-03
|
TESTING OF LUBRICANTS - TESTING IN THE FOUR-BALL TESTER - PART 5: DETERMINATION OF WEARING CHARACTERISTICS FOR CONSISTENT LUBRICANTS
|
|
ISO 4589-2:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
|
|
DIN 51350-4:2015-03
|
TESTING OF LUBRICANTS - TESTING IN THE FOUR-BALL TESTER - PART 4: DETERMINATION OF WELDING LOAD OF CONSISTENT LUBRICANTS
|
|
ISO 760:1978
|
Determination of water Karl Fischer method (General method)
|
|
ISO 2176:1995
|
Petroleum products — Lubricating grease — Determination of dropping point
|
|
ONORM EN ISO 3146 : 2003
|
PLASTICS - DETERMINATION OF MELTING BEHAVIOUR (MELTING TEMPERATURE OR MELTING RANGE) OF SEMI-CRYSTALLINE POLYMERS BY CAPILLARY TUBE AND POLARIZING-MICROSCOPE METHODS
|
|
ISO 4589-1:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements
|
