• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

PD ISO/TR 18569:2004

Current
Current

The latest, up-to-date edition.

Safety of machinery. Guidelines for the understanding and use of safety of machinery standards.
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

22-06-2004

Foreword
1 Scope
2 Classification of machinery safety standards
3 Basic concepts, principles and requirements
4 Safety distances and hand/arm speed
   4.1 General
   4.2 Safety distances
   4.3 Hand/arm speed
   4.4 Basic formula
5 Guards and interlocking devices
   5.1 General
   5.2 Guards
   5.3 Interlocking devices
6 Safety functions
   6.1 Emergency stop
   6.2 Energy isolation and prevention of unexpected
        start-up
   6.3 Mode selection, reduced speed and monitoring
7 Protective devices
   7.1 Enabling and two-hand control devices
   7.2 Hold-to-run, trip, mechanical restraint,
        limiting and limited movement devices
   7.3 Electro-sensitive protective equipment (ESPE)
   7.4 Pressure-sensitive protective devices (PSPDs)
8 Electrical equipment
9 Fluid power systems and components
10 Marking, warning devices, signs and symbols,
   actuating principles
11 Documentation
   11.1 Information for use
   11.2 Technical documentation
12 Ergonomics
   12.1 Terminology, general principles
   12.2 Human body dimensions
   12.3 Touchable surfaces
   12.4 Displays, control actuators
   12.5 Visual danger signals
   12.6 Auditory and visual signals, speech communication
   12.7 Human physical performance
   12.8 Application of ergonomics standards
13 Hazardous substances and airborne emissions
   13.1 Hazardous substances
   13.2 Airborne emissions
14 Risks arising from radiation
15 Permanent means of access
16 Fire and explosion
17 Acoustics
   17.1 Objectives
   17.2 Relevant standards
18 Mechanical vibration
   18.1 General considerations
   18.2 Types of vibration
19 Electromagnetic compatibility
Annex A Relationship of standards to various European
        Directives related to machinery
Annex B Ergonomic considerations
        B.1 Referenced standards
        B.2 Basic ergonomic design principles
        B.3 Basic considerations for man-machine interface
         when designing and constructing a machine
Annex C Outline of electrical requirements
Annex D Outline of standards related to electrical
        documentation
        D.1 IEC 61082, Preparation of documents used in
        electrotechnology
        D.2 IEC 61346-1, Structuring principles and
        reference designations - Part 1: Basic rules
Bibliography

Provides assistance to the designer or manufacturer of machinery and related equipment on the contents and how to apply the relevant Type A and Type B safety of machinery standards.

This Technical Report provides assistance to the designer or manufacturer of machinery and related equipment on the contents and how to apply the relevant Type A and Type B safety of machinery standards.

ISO/TR 18569 provides an overview which gives a general outline of the basic steps which can assist the manufacturer to declare conformity with the EU Machinery Directive and related standards or apply supporting standards in the case when specific Type C standards do not exist. It provides an outline of the various standards associated with machinery safety.

NOTE This Technical Report does not address Type C standards.

Committee
MCE/3
DocumentType
Standard
Pages
88
PublisherName
British Standards Institution
Status
Current

Standards Relationship
ISO/TR 18569:2004 Identical

ISO 7574-2:1985 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 2: Methods for stated values for individual machines
IEC 61000-4-8 : 2.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST
EN 50081-1:1992 Electromagnetic compatibility - Generic emission standard - Part 1: Residential, commercial and light industry
ISO 3511-1:1977 Process measurement control functions and instrumentation — Symbolic representation — Part 1: Basic requirements
ISO 10075-2:1996 Ergonomic principles related to mental workload Part 2: Design principles
ISO 13855:2010 Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body
ISO 9241-11:1998 Ergonomic requirements for office work with visual display terminals (VDTs) Part 11: Guidance on usability
ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 1746:1998 Safety of machinery - Guidance for the drafting of the noise clauses of safety standards
IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
ISO 3511-3:1984 Process measurement control functions and instrumentation — Symbolic representation — Part 3: Detailed symbols for instrument interconnection diagrams
ISO 11200:2014 Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
ISO 11226:2000 Ergonomics — Evaluation of static working postures
ISO 9241-5:1998 Ergonomic requirements for office work with visual display terminals (VDTs) — Part 5: Workstation layout and postural requirements
ISO 9241-17:1998 Ergonomic requirements for office work with visual display terminals (VDTs) Part 17: Form filling dialogues
ISO 12894:2001 Ergonomics of the thermal environment Medical supervision of individuals exposed to extreme hot or cold environments
EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
EN 1032:2003+A1:2008 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 5459:2011 Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
EN 12198-2:2002+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure
ISO 9241-10:1996 Ergonomic requirements for office work with visual display terminals (VDTs) Part 10: Dialogue principles
ISO 9241-9:2000 Ergonomic requirements for office work with visual display terminals (VDTs) Part 9: Requirements for non-keyboard input devices
ISO 14119:2013 Safety of machinery Interlocking devices associated with guards Principles for design and selection
EN 1093-1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
ISO 12001:1996 Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code
ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
ISO 5349-2:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace
ISO 7917:1987 Acoustics Measurement at the operator's position of airborne noise emitted by brush saws
ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
ISO 9921:2003 Ergonomics Assessment of speech communication
ISO 7182:1984 Acoustics Measurement at the operator's position of airborne noise emitted by chain saws
ANSI B11 TR1 : 2004 ERGONOMIC GUIDELINES FOR THE DESIGN, INSTALLATION AND USE OF MACHINE TOOLS
IEC 60416:1988 General principles for the formulation of graphical symbols
IEC 60364-4-473:1977+AMD1:1998 CSV Electrical installations of buildings - Part 4: Protection for safety - Chapter 47: Application of protective measures for safety - Section 473: Measures of protection against overcurrent
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
ISO 389-4:1994 Acoustics Reference zero for the calibration of audiometric equipment Part 4: Reference levels for narrow-band masking noise
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
ISO 3098-4:2000 Technical product documentation — Lettering — Part 4: Diacritical and particular marks for the Latin alphabet
ISO 3743-2:1994 Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms
IEC 61131-3:2013 Programmable controllers - Part 3: Programming languages
IEC 60947-4-1:2009+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
ISO 8662-9:1996 Hand-held portable power tools Measurement of vibrations at the handle Part 9: Rammers
ISO 7574-4:1985 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 4: Methods for stated values for batches of machines
ISO 14120:2015 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
IEC 61131-1:2003 Programmable controllers - Part 1: General information
ISO 8662-12:1997 Hand-held portable power tools Measurement of vibrations at the handle Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action
ISO 7250:1996 Basic human body measurements for technological design
EN 1093-9:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method
ISO 9614-1:1993 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points
ISO 8662-10:1998 Hand-held portable power tools Measurement of vibrations at the handle Part 10: Nibblers and shears
ISO 7243:2017 Ergonomics of the thermal environment — Assessment of heat stress using the WBGT (wet bulb globe temperature) index
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
ISO 1101:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
IEC 61000-4-11:2004+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
ISO 9241-12:1998 Ergonomic requirements for office work with visual display terminals (VDTs) Part 12: Presentation of information
IEC 61082-4:1996 Preparation of documents used in electrotechnology - Part 4: Location and installation documents
EN 13861:2011 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
1989/336/EEC : 1989 COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY
ISO 3098-5:1997 Technical product documentation Lettering Part 5: CAD lettering of the Latin alphabet, numerals and marks
ISO 9355-1:1999 Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators
EN 1093-3:2006+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant
ISO 13852:1996 Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 14738:2002 Safety of machinery — Anthropometric requirements for the design of workstations at machinery
ISO 3747:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment
EN 1005-1:2001+A1:2008 Safety of machinery - Human physical performance - Part 1: Terms and definitions
ISO 11689:1996 Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment
EN 1033 : 1995 HAND-ARM VIBRATION - LABORATORY MEASUREMENT OF VIBRATION AT THE GRIP SURFACE OF HAND-GUIDED MACHINERY - GENERAL
IEC 61310-3:2007 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
ISO 1219-2:2012 Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams
IEC 61000-4-8:2009 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
ISO 3740:2000 Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards
IEC 61000-4-4:2012 RLV Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
IEC 60076-5:2006 Power transformers - Part 5: Ability to withstand short circuit
ISO 7726:1998 Ergonomics of the thermal environment Instruments for measuring physical quantities
ISO 14118:2000 Safety of machinery Prevention of unexpected start-up
ISO 13851:2002 Safety of machinery Two-hand control devices Functional aspects and design principles
ISO 9241-16:1999 Ergonomic requirements for office work with visual display terminals (VDTs) Part 16: Direct manipulation dialogues
ISO 14123-1:2015 Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers
ISO 8662-6:1994 Hand-held portable power tools Measurement of vibrations at the handle Part 6: Impact drills
ISO 9614-2:1996 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning
ISO 9241-7:1998 Ergonomic requirements for office work with visual display terminals (VDTs) Part 7: Requirements for display with reflections
ISO 4196:1984 Graphical symbols — Use of arrows
ISO 3774:1988 Cinematography — 35 mm motion-picture film perforated 8 mm Type S (1-3-5-7-0) and (1-0) — Cutting and perforating dimensions
ISO 8662-4:1994 Hand-held portable power tools Measurement of vibrations at the handle Part 4: Grinders
ISO 7574-1:1985 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 1: General considerations and definitions
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
ISO 31-11:1992 Quantities and units Part 11: Mathematical signs and symbols for use in the physical sciences and technology
IEC 60947-7-1:2009 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
ISO 1680:2013 Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines
IEC 61082-1:2014 RLV Preparation of documents used in electrotechnology - Part 1: Rules
ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
IEC 60027-1:1992 Letters symbols to be used in electrical technology - Part 1: General
IEC 60757:1983 Code for designation of colours
ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
IEC 60072-1:1991 Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
EN 563:1994/A1:1999/AC:2000 SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES
ISO 13406-1:1999 Ergonomic requirements for work with visual displays based on flat panels Part 1: Introduction
IEC 61082-3:1993 Preparation of documents used in electrotechnology - Part 3: Connection diagrams, tables and lists
ISO 9241-14:1997 Ergonomic requirements for office work with visual display terminals (VDTs) — Part 14: Menu dialogues
ISO 8662-2:1992 Hand-held portable power tools Measurement of vibrations at the handle Part 2: Chipping hammers and riveting hammers
ISO 216:2007 Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction
ISO 406:1987 Technical drawings Tolerancing of linear and angular dimensions
ISO 11205:2003 Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
IEC 60364-4-46:1981 Electrical installations of buildings. Part 4: Protection for safety. Chapter 46: Isolation and switching
ISO 13853:1998 Safety of machinery Safety distances to prevent danger zones being reached by the lower limbs
IEC 61346-1:1996 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules
EN 1093-4:1996+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method
ISO 9241-15:1997 Ergonomic requirements for office work with visual display terminals (VDTs) Part 15: Command dialogues
ISO 11690-2:1996 Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 2: Noise control measures
ISO 5455:1979 Technical drawings Scales
ISO 14159:2002 Safety of machinery — Hygiene requirements for the design of machinery
ISO 8662-13:1997 Hand-held portable power tools Measurement of vibrations at the handle Part 13: Die grinders
ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
ISO 8662-5:1992 Hand-held portable power tools — Measurement of vibrations at the handle — Part 5: Pavement breakers and hammers for construction work
IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
EN 50081-2:1993 Electromagnetic compatibility - Generic emission standard - Part 2: Industrial environment
ISO 11429:1996 Ergonomics System of auditory and visual danger and information signals
ISO 14915-1:2002 Software ergonomics for multimedia user interfaces Part 1: Design principles and framework
ISO 15534-3:2000 Ergonomic design for the safety of machinery — Part 3: Anthropometric data
ISO 10075-3:2004 Ergonomic principles related to mental workload Part 3: Principles and requirements concerning methods for measuring and assessing mental workload
ISO 8662-11:1999 Hand-held portable power tools Measurement of vibrations at the handle Part 11: Fastener driving tools
ISO 5135:1997 Acoustics Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
ISO 14915-3:2002 Software ergonomics for multimedia user interfaces Part 3: Media selection and combination
ISO 8662-14:1996 Hand-held portable power tools Measurement of vibrations at the handle Part 14: Stone-working tools and needle scalers
IEC 60027-3:2002 Letter symbols to be used in electrical technology - Part 3: Logarithmic and related quantities, and their units
ISO 2768-2:1989 GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN 1093-7:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet
ISO/TR 11079:1993 Evaluation of cold environments — Determination of required clothing insulation (IREQ)
IEC 61496-3:2008 Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)
ISO 5457:1999 Technical product documentation Sizes and layout of drawing sheets
ISO 3511-2:1984 Process measurement control functions and instrumentation — Symbolic representation — Part 2: Extension of basic requirements
ISO 286-1:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits
ISO/TR 7849:1987 Acoustics Estimation of airborne noise emitted by machinery using vibration measurement
ISO 31-2:1992 Quantities and units Part 2: Periodic and related phenomena
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
ISO 14121:1999 Safety of machinery Principles of risk assessment
IEC 60439-1:1999+AMD1:2004 CSV Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
IEC TR 61131-8:2003 Programmable controllers - Part 8: Guidelines for the application and implementation of programming languages
ISO 11428:1996 Ergonomics Visual danger signals General requirements, design and testing
ISO 3098-2:2000 Technical product documentation — Lettering — Part 2: Latin alphabet, numerals and marks
IEC 60617-13:1993 Graphical symbols for diagrams - Part 13: Analogue elements
ISO 8996:2004 Ergonomics of the thermal environment Determination of metabolic rate
ISO 9614-3:2002 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning
ISO 7933:2004 Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
IEC 60072-2:1990 Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360
ISO 11203:1995 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
ISO 3098-0:1997 Technical product documentation Lettering Part 0: General requirements
ISO 3511-4:1985 Industrial process measurement control functions and instrumentation — Symbolic representation — Part 4: Basic symbols for process computer, interface, and shared display/control functions
ISO 1219-1:2012 Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications
ISO 7730:2005 Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
ISO 286-2:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
ISO 11064-3:1999 Ergonomic design of control centres — Part 3: Control room layout
ISO 31-10:1992 Quantities and units Part 10: Nuclear reactions and ionizing radiations
EN 12198-3:2002+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening
ISO 13854:2017 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body
ISO 1999:2013 Acoustics Estimation of noise-induced hearing loss
ISO 13856-1:2013 Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
ISO 11399:1995 Ergonomics of the thermal environment Principles and application of relevant International Standards
ISO 15535:2012 General requirements for establishing anthropometric databases
ISO 11064-1:2000 Ergonomic design of control centres Part 1: Principles for the design of control centres
EN 12198-1:2000+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles
ISO 3098-6:2000 Technical product documentation — Lettering — Part 6: Cyrillic alphabet
IEC 61131-2:2017 Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests
ISO 3098-3:2000 Technical product documentation — Lettering — Part 3: Greek alphabet
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
ISO 7574-3:1985 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 3: Simple (transition) method for stated values for batches of machines
ISO 15534-1:2000 Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
ISO 10551:1995 Ergonomics of the thermal environment Assessment of the influence of the thermal environment using subjective judgement scales
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
IEC 60027-2:2005 Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics
ISO 9241-2:1992 Ergonomic requirements for office work with visual display terminals (VDTs) — Part 2: Guidance on task requirements
ISO 8662-1:1988 Hand-held portable power tools Measurement of vibrations at the handle Part 1: General
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
ISO 5349-1:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements
ISO 389-3:2016 Acoustics Reference zero for the calibration of audiometric equipment Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators
ISO 6189:1983 Acoustics Pure tone air conduction threshold audiometry for hearing conservation purposes
ISO 3741:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms
EN 1760-2:2001+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
ISO 3461-1:1988 General principles for the creation of graphical symbols — Part 1: Graphical symbols for use on equipment
EN 1093-8:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method
EN 1005-3:2002+A1:2008 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
ISO 129:1985 Technical drawings Dimensioning General principles, definitions, methods of execution and special indications
IEC 60027-4:2006 Letter symbols to be used in electrical technology - Part 4: Rotating electric machines
IEC 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
IEC 60947-2:2016 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
ISO 9241-6:1999 Ergonomic requirements for office work with visual display terminals (VDTs) Part 6: Guidance on the work environment
ISO 8662-8:1997 Hand-held portable power tools Measurement of vibrations at the handle Part 8: Polishers and rotary, orbital and random orbital sanders
ISO 3745:2012 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms
IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
ISO 15536-1:2005 Ergonomics Computer manikins and body templates Part 1: General requirements
1998/37/EC : 1998 DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
ISO 15537:2004 Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs
IEC 61131-7:2000 Programmable controllers - Part 7: Fuzzy control programming
ISO 11228-1:2003 Ergonomics Manual handling Part 1: Lifting and carrying
IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
ISO 10075:1991 Ergonomic principles related to mental work-load General terms and definitions
ISO 3864:1984 Safety colours and safety signs
ISO 9241-8:1997 Ergonomic requirements for office work with visual display terminals (VDTs) Part 8: Requirements for displayed colours
ISO 128:1982 Technical drawings — General principles of presentation
ISO 9920:2007 Ergonomics of the thermal environment Estimation of thermal insulation and water vapour resistance of a clothing ensemble
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO 15534-2:2000 Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings
ISO 7029:2017 Acoustics — Statistical distribution of hearing thresholds related to age and gender
IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
ISO 6385:2016 Ergonomics principles in the design of work systems
IEC 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
ISO 11064-2:2000 Ergonomic design of control centres Part 2: Principles for the arrangement of control suites
ISO 9886:2004 Ergonomics Evaluation of thermal strain by physiological measurements
ISO 13731:2001 Ergonomics of the thermal environment Vocabulary and symbols
ISO 13407:1999 Human-centred design processes for interactive systems
EN 1093-6:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet
EN 1070 : 1998 SAFETY OF MACHINERY - TERMINOLOGY
ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 11204:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
IEC 61346-2:2000 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 2: Classification of objects and codes for classes
ISO 5458:1998 Geometrical Product Specifications (GPS) Geometrical tolerancing Positional tolerancing
EN 1093-11:2001+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index
ISO 31-12:1992 Quantities and units Part 12: Characteristic numbers
1987/404/EEC : 1987 COUNCIL DIRECTIVE OF 25 JUNE 1987 ON THE HARMONIZATION OF THE LAWS OF THE MEMBER STATES RELATING TO SIMPLE PRESSURE VESSELS
ISO 9355-2:1999 Ergonomic requirements for the design of displays and control actuators — Part 2: Displays
IEC 61496-2:2013 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
ISO 8662-7:1997 Hand-held portable power tools Measurement of vibrations at the handle Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action
ISO 14123-2:2015 Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 2: Methodology leading to verification procedures
IEC 60617-12:1997 Graphical symbols for diagrams - Part 12: Binary logic elements
ISO 9241-13:1998 Ergonomic requirements for office work with visual display terminals (VDTs) — Part 13: User guidance
ISO 3743-1:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room
IEC 61082-2:1993 Preparation of documents used in electrotechnology - Part 2: Function-oriented diagrams
IEC 60947-5-5:1997+AMD1:2005+AMD2:2016 CSV Low-voltage switchgear and controlgear - Part 5-5: Control circuitdevices and switching elements - Electrical emergency stop device with mechanical latching function
1994/9/EC : 1994 DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
ISO 13406-2:2001 Ergonomic requirements for work with visual displays based on flat panels Part 2: Ergonomic requirements for flat panel displays
ISO 11684:1995 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Safety signs and hazard pictorials — General principles
EN 50082-1:1997 Electromagnetic compatibility - Generic immunity standard - Part 1: Residential, commercial and light industry

View more information
£280.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.