• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

PD ISO/TR 22100-3:2016

Current
Current

The latest, up-to-date edition.

Safety of machinery. Relationship with ISO 12100 Implementation of ergonomic principles in safety standards
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

30-09-2016

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Strategy for risk assessment and risk reduction in
  relation to ergonomic hazards
5 Incorporating ergonomics into the risk assessment process
6 Risk reduction - Design guidance
7 Verification of safety requirements
Annex A (informative) - Standards dealing with ergonomics
        relevant to machinery design
Annex B (informative) - Work system and machinery design
Annex C (informative) - Ergonomics standards for
        specific applications
Annex D (informative) - Example of part of the implementation
        of the ergonomic factors
Bibliography

Defines the main ergonomic risk factors influencing the safety of machinery and gives a framework for incorporating them into the design of machines by the integration of important ergonomic principles relating to: - avoiding stressful postures and movements during use of the machine; - designing machines, and more especially hand-held and mobile machines, which can be operated easily; - avoiding as far as possible noise, vibration, thermal effects; - avoiding linking the operators working rhythm to an automatic succession of cycles; - providing local lighting on or in the machine; - selecting, locating and identifying manual controls (actuators) so that they are clearly visible and identifiable and appropriately marked where necessary and; - selecting, designing and locating indicators, dials and visual display units.

Committee
MCE/3
DocumentType
Standard
Pages
50
PublisherName
British Standards Institution
Status
Current

Standards Relationship
ISO/TR 22100-3:2016 Identical

DGUV INFORMATION 209-068 : 2010
EN 1005-4:2005+A1:2008 Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery
ISO 15265:2004 Ergonomics of the thermal environment Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions
ISO 10075-2:1996 Ergonomic principles related to mental workload Part 2: Design principles
ISO 9241-400:2007 Ergonomics of humansystem interaction Part 400: Principles and requirements for physical input devices
ISO 11226:2000 Ergonomics — Evaluation of static working postures
EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
EN 13557:2003+A2:2008 Cranes - Controls and control stations
EN 12464-1:2011 Light and lighting - Lighting of work places - Part 1: Indoor work places
ISO 14119:2013 Safety of machinery Interlocking devices associated with guards Principles for design and selection
ISO 9241-110:2006 Ergonomics of human-system interaction Part 110: Dialogue principles
EN 547-2:1996+A1:2008 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
ISO 9921:2003 Ergonomics Assessment of speech communication
ISO 11228-3:2007 Ergonomics Manual handling Part 3: Handling of low loads at high frequency
ISO 28803:2012 Ergonomics of the physical environment — Application of International Standards to people with special requirements
ISO 11161:2007 Safety of machinery — Integrated manufacturing systems — Basic requirements
ANSI B11 TR1 : 2004 ERGONOMIC GUIDELINES FOR THE DESIGN, INSTALLATION AND USE OF MACHINE TOOLS
ISO/TR 12295:2014 Ergonomics Application document for International Standards on manual handling (ISO 11228-1, ISO 11228-2 and ISO 11228-3) and evaluation of static working postures (ISO 11226)
IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals
EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
ISO 11228-2:2007 Ergonomics Manual handling Part 2: Pushing and pulling
IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
ISO 3411:2007 Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
ISO/TR 9241-100:2010 Ergonomics of human-system interaction — Part 100: Introduction to standards related to software ergonomics
ISO 9241-210:2010 Ergonomics of human-system interaction Part 210: Human-centred design for interactive systems
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
ISO 5353:1995 Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index point
EN 614-2:2000+A1:2008 Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks
ISO 9241-12:1998 Ergonomic requirements for office work with visual display terminals (VDTs) Part 12: Presentation of information
EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines
ISO 9355-1:1999 Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 14738:2002 Safety of machinery — Anthropometric requirements for the design of workstations at machinery
EN 547-1:1996+A1:2008 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
EN 1005-1:2001+A1:2008 Safety of machinery - Human physical performance - Part 1: Terms and definitions
EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
ISO 11064-4:2013 Ergonomic design of control centres — Part 4: Layout and dimensions of workstations
IEC 61310-3:2007 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
ISO 11064-5:2008 Ergonomic design of control centres — Part 5: Displays and controls
ISO/TS 13732-2:2001 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 2: Human contact with surfaces at moderate temperature
EN 13586:2004+A1:2008 Cranes - Access
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 11064-6:2005 Ergonomic design of control centres Part 6: Environmental requirements for control centres
ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
ISO/TR 14121-2:2012 Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods
CR 1030-1 : 1995 HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 1: ENGINEERING METHODS BY DESIGN OF MACHINERY
ISO 26800:2011 Ergonomics — General approach, principles and concepts
ISO 2860:1992 Earth-moving machinery — Minimum access dimensions
IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
ISO 11429:1996 Ergonomics System of auditory and visual danger and information signals
CEN/TR 614-3:2010 Safety of machinery - Part 3: Ergonomic principles for the design of mobile machinery
ISO 15534-3:2000 Ergonomic design for the safety of machinery — Part 3: Anthropometric data
ISO 10075-3:2004 Ergonomic principles related to mental workload Part 3: Principles and requirements concerning methods for measuring and assessing mental workload
ISO 7250-1:2017 Basic human body measurements for technological design — Part 1: Body measurement definitions and landmarks
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
ISO 21281:2005 Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks Rules for the construction and layout of pedals
EN 547-3:1996+A1:2008 Safety of machinery - Human body measurements - Part 3: Anthropometric data
ISO 1503:2008 Spatial orientation and direction of movement — Ergonomic requirements
DGUV INFORMATION 209-069 : 2010 ERGONOMISCHE MASCHINENGESTALTUNG VON WERKZEUGMASCHINEN DER METALLBEARBEITUNG
ISO 9355-3:2006 Ergonomic requirements for the design of displays and control actuators — Part 3: Control actuators
ISO 11428:1996 Ergonomics Visual danger signals General requirements, design and testing
EN 12464-2:2014 Light and lighting - Lighting of work places - Part 2: Outdoor work places
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
EN 13490:2001+A1:2008 Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration
ISO/IEC Guide 71:2014 Guide for addressing accessibility in standards
ISO 11064-3:1999 Ergonomic design of control centres — Part 3: Control room layout
ISO 11399:1995 Ergonomics of the thermal environment Principles and application of relevant International Standards
ISO 15535:2012 General requirements for establishing anthropometric databases
ISO 11064-1:2000 Ergonomic design of control centres Part 1: Principles for the design of control centres
ISO 15534-1:2000 Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
ISO/TR 22411:2008 Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities
ISO 7250-3:2015 Basic human body measurements for technological design — Part 3: Worldwide and regional design ranges for use in product standards
ISO 4254-1:2013 Agricultural machinery — Safety — Part 1: General requirements
EN 1005-3:2002+A1:2008 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
ISO 9241-300:2008 Ergonomics of human-system interaction — Part 300: Introduction to electronic visual display requirements
ISO 15536-1:2005 Ergonomics Computer manikins and body templates Part 1: General requirements
ISO 13732-3:2005 Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 3: Cold surfaces
ISO 15537:2004 Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs
ISO 11228-1:2003 Ergonomics Manual handling Part 1: Lifting and carrying
ISO 20282-1:2006 Ease of operation of everyday products Part 1: Design requirements for context of use and user characteristics
ISO 2867:2011 Earth-moving machinery Access systems
ISO 15534-2:2000 Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings
ISO 6385:2016 Ergonomics principles in the design of work systems
EN 12643:2014 Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified)
ISO 11064-2:2000 Ergonomic design of control centres Part 2: Principles for the arrangement of control suites
EN 894-4:2010 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators
ISO/TR 7250-2:2010 Basic human body measurements for technological design Part 2: Statistical summaries of body measurements from national populations
ISO 9355-2:1999 Ergonomic requirements for the design of displays and control actuators — Part 2: Displays
ISO Guide 78:2008 Safety of machinery Rules for drafting and presentation of safety standards
ISO 23125:2015 Machine tools Safety Turning machines
ISO 11064-7:2006 Ergonomic design of control centres Part 7: Principles for the evaluation of control centres
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

View more information
£262.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.