PREN 14915 : DRAFT 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
01-09-2013
06-03-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Testing, assessment and sampling methods
6 Evaluation of conformity
7 Marking, labelling and packaging
Annex A (informative) - Simplified encoding system for
solid wood panelling and cladding
Annex B (informative) - General consideration regarding
durability of wood
Annex C (normative) - Formaldehyde classes
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Products Directive
Bibliography
Gives the relevant characteristics and the appropriate test methods to determine these characteristics for solid wood products to be used as panelling and cladding (including siding) for: - wall and ceiling panelling for internal use, - wall and ceiling cladding for external uses.
| Committee |
TC 175
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| 13/30268273 DC : 0 | Identical |
| DIN EN 14951:2006-06 | Solid hardwood panelling and cladding - Machined profiles elements |
| DIN EN 14519:2006-03 | Solid softwood panelling and cladding - Machined profiles with tongue and groove |
| DIN EN 14951 E : 2006 | SOLID HARDWOOD PANELLING AND CLADDING - MACHINED PROFILES ELEMENTS |
| DIN EN 14519 E : 2006 | SOLID SOFTWOOD PANELLING AND CLADDING - MACHINED PROFILES WITH TONGUE AND GROOVE |
| BS EN 14951:2006 | Solid hardwood paneling and cladding. Machined profiles elements |
| BS EN 14519:2005 | Solid softwood panelling and cladding. Softwood machined profiles with tongue and groove |
| EN 14951:2006 | Solid hardwood panelling and cladding - Machined profiles elements |
| EN 14519 : 2005 | SOLID SOFTWOOD PANELLING AND CLADDING - MACHINED PROFILES WITH TONGUE AND GROOVE |
| 05/30129427 DC : DRAFT FEB 2005 | EN 15146 - SOLID SOFTWOOD PANELLING AND CLADDING - MACHINED PROFILES WITHOUT TONGUE AND GROOVE |
| EN 717-2:1994/AC:2002 | WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 2: FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD |
| EN 335-2:2006 | Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood |
| EN 120:1992 | Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN ISO 10456:2007/AC:2009 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| EN 350-1:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Part 1: Guide to the principles of testing and classification of the natural durability of wood |
| EN 351-1:2007 | Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention |
| EN 13756:2002 | WOOD FLOORING - TERMINOLOGY |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| EN 14951:2006 | Solid hardwood panelling and cladding - Machined profiles elements |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
| EN 14519 : 2005 | SOLID SOFTWOOD PANELLING AND CLADDING - MACHINED PROFILES WITH TONGUE AND GROOVE |
| EN 13556:2003 | Round and sawn timber - Nomenclature of timbers used in Europe |
| EN 1309-1:1997 | Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| EN 13823:2010+A1:2014 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
| EN 15146:2006 | Solid softwood panelling and cladding - Machined profiles without tongue and groove |
| ISO 11654:1997 | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption |
| EN 350-2:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe |
| ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
| EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 599-1:2009+A1:2013 | Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 1: Specification according to use class |
| EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 460:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes |
| EN 599-2:2016 | Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 2: Labelling |
| CEN/TR 14823:2003 | Durability of wood and wood-based products - Quantitative determination of pentachlorophenol in wood - Gas chromatographic method |
| EN ISO 11654:1997 | Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
| EN 844-9 : 1997 | ROUND AND SAWN TIMBER - TERMINOLOGY - PART 9: TERMS RELATING TO FEATURES OF SAWN TIMBER |
| EN ISO 11925-2:2010/AC:2011 | REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.