S.R. CEN/TS 14237:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
TEXTILES FOR HEALTHCARE AND SOCIAL SERVICES FACILITIES
Available format(s)
Hardcopy , PDF
Superseded date
17-12-2021
Language(s)
English
Published date
01-01-2015
Publisher
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Properties, references and requirements
5 Product information
Bibliography
Specifies characteristics, test methods and minimum performance specifications for unused textile for the healthcare and social service facilities (hospitals, residential care homes, etc.) to give guidance on the suitability of products intended to be maintained by industrial laundering.
| DevelopmentNote |
Supersedes I.S. ENV 14237. (02/2016)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| CEN/TS 14237:2015 | Identical |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| ISO 13936-2:2004 | Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 2: Fixed load method |
| EN ISO 105-P01 : 1995 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO DRY HEAT (EXCLUDING PRESSING) |
| ISO 105-N02:1993 | Textiles Tests for colour fastness Part N02: Colour fastness to bleaching: Peroxide |
| ISO 105-N01:1993 | Textiles Tests for colour fastness Part N01: Colour fastness to bleaching: Hypochlorite |
| ISO 4915:1991 | Textiles Stitch types Classification and terminology |
| EN 20811 : 1992 | TEXTILES - DETERMINATION OF RESISTANCE TO WATER PENETRATION - HYDROSTATIC PRESSURE TEST |
| EN 1644-1 : 1997 | Test methods for nonwoven compresses for medical use - Part 1: Nonwovens used in the manufacture of compresses |
| EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
| EN ISO 105-C06:2010 | Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:2010) |
| EN 410:2011 | Glass in building - Determination of luminous and solar characteristics of glazing |
| ISO 105-E04:2013 | Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration |
| ISO 12945-2:2000 | Textiles Determination of fabric propensity to surface fuzzing and to pilling Part 2: Modified Martindale method |
| ISO 4916:1991 | Textiles — Seam types — Classification and terminology |
| ISO 6330:2012 | Textiles Domestic washing and drying procedures for textile testing |
| ISO 9237:1995 | Textiles — Determination of the permeability of fabrics to air |
| ISO 105-P01:1993 | Textiles Tests for colour fastness Part P01: Colour fastness to dry heat (excluding pressing) |
| EN ISO 105-E04:2013 | Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2013) |
| EN 1103:2005 | Textiles - Fabrics for apparel - Detailed procedure to determine the burning behaviour |
| EN ISO 12952-2:2010 | Textiles - Assessment of the ignitability of bedding items - Part 2: Ignition source: match-flame equivalent (ISO 12952-2:2010) |
| EN ISO 9237 : 1995 | TEXTILES - DETERMINATION OF PERMEABILITY OF FABRICS TO AIR |
| EN 13373 : 2003 | NATURAL STONE TEST METHODS - DETERMINATION OF GEOMETRIC CHARACTERISTICS ON UNITS |
| EN ISO 13938-2 : 1999 | TEXTILES - BURSTING PROPERTIES OF FABRICS - PART 2: PNEUMATIC METHOD FOR DETERMINATION OF BURSTING STRENGTH AND BURSTING DISTENSION |
| EN ISO 105-A01:2010 | Textiles - Tests for colour fastness - Part A01: General principles of testing (ISO 105-A01:2010) |
| ISO 12945-1:2000 | Textiles Determination of fabric propensity to surface fuzzing and to pilling Part 1: Pilling box method |
| ISO 13938-2:1999 | Textiles Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension |
| EN ISO 5077:2008 | Textiles - Determination of dimensional change in washing and drying (ISO 5077:2007) |
| EN 12590 : 1999 | TEXTILES - INDUSTRIAL SEWING THREADS MADE WHOLLY OR PARTLY FROM SYNTHETIC FIBRES |
| EN ISO 12945-2:2000 | TEXTILES - DETERMINATION OF FABRIC PROPENSITY TO SURFACE FUZZING AND TO PILLING - PART 2: MODIFIED MARTINDALE METHOD |
| EN ISO 13936-1 : 2004 | TEXTILES - DETERMINATION OF THE SLIPPAGE RESISTANCE OF YARNS AT A SEAM IN WOVEN FABRICS - PART 1: FIXED SEAM OPENING METHOD (ISO 13936-1:2004) |
| ISO 12952-2:2010 | Textiles Assessment of the ignitability of bedding items Part 2: Ignition source: match-flame equivalent |
| EN 14065:2016 | Textiles - Laundry processed textiles - Biocontamination control system |
| EN ISO 13938-1 : 1999 | TEXTILES - BURSTING PROPERTIES OF FABRICS - PART 1: HYDRAULIC METHOD FOR DETERMINATION OF BURSTING STRENGTH AND BURSTING DISTENSION |
| EN ISO 12952-1:2010 | Textiles - Assessment of the ignitability of bedding items - Part 1: Ignition source: smouldering cigarette (ISO 12952-1:2010) |
| ISO 12952-1:2010 | Textiles Assessment of the ignitability of bedding items Part 1: Ignition source: smouldering cigarette |
| ISO 105-X12:2016 | Textiles Tests for colour fastness Part X12: Colour fastness to rubbing |
| ISO 11092:2014 | Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) |
| EN ISO 11092:2014 | Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) (ISO 11092:2014) |
| ISO 139:2005 | Textiles Standard atmospheres for conditioning and testing |
| EN 20105-N01 : 1995 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO BLEACHING: HYPOCHLORITE (ISO 105-N01:1993) |
| EN ISO 139:2005/A1:2011 | Textiles - Standard atmospheres for conditioning and testing - Amendment 1 (ISO 139:2005/AMD 1:2011) |
| ISO 13936-1:2004 | Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 1: Fixed seam opening method |
| EN ISO 105-N02 : 1995 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART N02: COLOUR FASTNESS TO BLEACHING - PEROXIDE (ISO 105-N02:1993) |
| ISO 105-A01:2010 | Textiles Tests for colour fastness Part A01: General principles of testing |
| EN ISO 105-X12:2016 | Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing (ISO 105-X12:2016) |
| EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
| ISO 13938-1:1999 | Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension |
| EN ISO 12945-1:2000 | TEXTILES - DETERMINATION OF FABRIC PROPENSITY TO SURFACE FUZZING AND TO PILLING - PILLING BOX METHOD |
| EN 14697:2005 | Textiles - Terry towels and terry towel fabrics - Specification and methods of test |
| EN ISO 6330:2012 | Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2012) |
| ISO 105-C06:2010 | Textiles Tests for colour fastness Part C06: Colour fastness to domestic and commercial laundering |
| EN ISO 13936-2 : 2004 | TEXTILES - DETERMINATION OF THE SLIPPAGE RESISTANCE OF YARNS AT A SEAM IN WOVEN FABRICS - PART 2: FIXED LOAD METHOD (ISO 13936-2:2004) |
| ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
£33.86
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.