• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

S.R. ISO/TR 10017:2003

Current
Current

The latest, up-to-date edition.

GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2003

Preview

Foreword
Introduction
1 Scope
2 Normative references
3 Identification of potential needs for statistical
  techniques
4 Descriptions of statistical techniques identified
Bibliography

Specifies guidance on the selection of appropriate statistical techniques that may be useful to an organization in developing, implementing, maintaining and improving a quality management system in compliance with ISO 9001.

DevelopmentNote
Issue date: 14.06.2012. (06/2012)
DocumentType
Standard
Pages
39
PublisherName
National Standards Authority of Ireland
Status
Current

Standards Relationship
ISO/TR 10017:2003 Identical

IEC 61025:2006 Fault tree analysis (FTA)
ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
ISO 11843-2:2000 Capability of detection — Part 2: Methodology in the linear calibration case
IEC 61123:1991 Reliability testing - Compliance test plans for success ratio
ISO 2859-4:2002 Sampling procedures for inspection by attributes Part 4: Procedures for assessment of declared quality levels
ISO 10725:2000 Acceptance sampling plans and procedures for the inspection of bulk materials
IEC 60863:1986 Presentation of reliability, maintainability and availability predictions
ISO 2859-3:2005 Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures
ISO/TS 14253-2:1999 Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
ISO 11843-1:1997 Capability of detection Part 1: Terms and definitions
ISO 7873:1993 Control charts for arithmetic average with warning limits
ISO 2854:1976 Statistical interpretation of data — Techniques of estimation and tests relating to means and variances
ISO 16269-7:2001 Statistical interpretation of data — Part 7: Median — Estimation and confidence intervals
IEC 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
ISO 3951:1989 Sampling procedures and charts for inspection by variables for percent nonconforming
IEC 61649:2008 Weibull analysis
IEC 61014:2003 Programmes for reliability growth
ISO/IEC Guide 43-1:1997 Proficiency testing by interlaboratory comparisons Part 1: Development and operation of proficiency testing schemes
IEC 61070:1991 Compliance test procedures for steady-state availability
ISO 14253-1:2017 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications
IEC 61078:2016 Reliability block diagrams
IEC 61165:2006 Application of Markov techniques
ISO 7870:1993 Control charts General guide and introduction
ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method
ISO Guide 33:2015 Reference materials Good practice in using reference materials
ISO 11648-2:2001 Statistical aspects of sampling from bulk materials — Part 2: Sampling of particulate materials
ISO 2859-2:1985 Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values
ISO Guide 35:2017 Reference materials Guidance for characterization and assessment of homogeneity and stability
ISO 2859-0:1995 Sampling procedures for inspection by attributes — Part 0: Introduction to the ISO 2859 attribute sampling system
IEC 61163-1:2006 Reliability stress screening - Part 1: Repairable assemblies manufactured in lots
ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method
ISO 11095:1996 Linear calibration using reference materials
ISO 2602:1980 Statistical interpretation of test results Estimation of the mean Confidence interval
ISO 8422:2006 Sequential sampling plans for inspection by attributes
IEC 61163-2:1998 Reliability stress screening - Part 2: Electronic components
ISO 3301:1975 Statistical interpretation of data — Comparison of two means in the case of paired observations
ISO 3534-2:2006 Statistics Vocabulary and symbols Part 2: Applied statistics
IEC 61124:2012 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
ISO/TR 13425:2006 Guidelines for the selection of statistical methods in standardization and specification
ISO 9004:2009 Managing for the sustained success of an organization A quality management approach
ISO/TR 8550:1994 Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discrete items in lots
IEC 61164:2004 Reliability growth - Statistical test and estimation methods
ISO 7966:1993 Acceptance control charts
ISO 8423:2008 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
IEC 60300-1:2014 Dependability management - Part 1: Guidance for management and application
ISO 3494:1976 Statistical interpretation of data — Power of tests relating to means and variances
ISO 10012:2003 Measurement management systems — Requirements for measurement processes and measuring equipment
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 9001:2015 Quality management systems — Requirements
IEC 60300-2:2004 Dependability management - Part 2: Guidelines for dependability management
ISO 3534-3:2013 Statistics — Vocabulary and symbols — Part 3: Design of experiments
IEC 60300-3-9:1995 Dependability management - Part 3: Application guide - Section 9: Risk analysis of technological systems
ISO 5479:1997 Statistical interpretation of data — Tests for departure from the normal distribution
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
ISO 11462-1:2001 Guidelines for implementation of statistical process control (SPC) Part 1: Elements of SPC
ISO 8595:1989 Interpretation of statistical data Estimation of a median
IEC 61650:1997 Reliability data analysis techniques - Procedures for comparison of two constant failure rates and two constant failure (event) intensities
ISO/IEC Guide 43-2:1997 Proficiency testing by interlaboratory comparisons Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
ISO/TR 7871:1997 Cumulative sum charts Guidance on quality control and data analysis using CUSUM techniques
ISO 5725-5:1998 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
ISO 3534-1:2006 Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability

View more information
£54.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.