SAE AIR 2000 : 2000
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
AEROSPACE FLUID SYSTEM STANDARDS, METRIC, NATIONAL AND INTERNATIONAL
Available format(s)
Hardcopy , PDF
Superseded date
11-08-2020
Language(s)
English
Published date
01-01-2000
Publisher
1 SCOPE
2 REFERENCES
3 APPROVED METRIC FLUID SYSTEM STANDARDS
4 FLUID SYSTEM STANDARDS
5 NOTES
The purpose of this aerospace information report is to provide a listing of national and international metric standards for use in aerospace fluid systems with their equivalent SAE inch, International ISO, and European AECMA standards.
| Committee |
G 3
|
| DocumentType |
Standard
|
| Pages |
39
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
| SAE AIR 5426 : 2013 | FITTING AND FITTING ASSEMBLY SELECTION, INSTALLATION, INSPECTION AND MAINTENANCE OF |
| SAE AIR 797 : 2013 | HOSE CHARACTERISTICS AND SELECTION CHART |
| ISO 2964:1985 | Aerospace — Tubing — Outside diameters and thicknesses — Metric dimensions |
| ISO 1465:1989 | Aircraft Liquid oxygen replenishment couplings Mating dimensions |
| PREN 3561 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - FERRULES WITH DYNAMIC BEAM SEAL END, WELDED AND REDUCED AT PIPE END |
| PREN 2656 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS UP TO 56000 KPA - FITTING END, WELDED - GEOMETRICAL CONFIGURATION |
| PREN 4194 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD |
| ISO 7320:1992 | Aerospace Couplings, threaded and sealed, for fluid systems Dimensions |
| ISO 8913:2006 | Aerospace Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) Procurement specification |
| ISO 5884:1987 | Aerospace Fluid systems and components Methods for system sampling and measuring the solid particle contamination of hydraulic fluids |
| ISO 3174:1994 | Aircraft — Connections for checking hydraulic systems by ground appliances — Threaded type |
| PREN 4028 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, SWIVEL NUT ON RUN |
| PREN 4183 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, DOUBLE, WELDED |
| PREN 4184 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 45 DEGREE, DOUBLE, WELDED |
| ISO 4153:1981 | Aircraft — Pressure fuel dispensing system — Test procedure and limit value for shut-off surge pressure |
| PREN 3691 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD, LONG, WELDED |
| ISO 5855-1:1999 | Aerospace MJ threads Part 1: General requirements |
| PREN 4020 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 90 DEGREES, WELDED END WITH THRUST WIRE NUT |
| PREN 2245 : 2 | AEROSPACE SERIES - PIPELINES FOR LIQUIDS AND GASES - DEFINITIONS |
| ISO 11:1987 | Aircraft Ground pressure testing connections for pressure cabins |
| PREN 3576 : 200P2 | AEROSPACE SERIES - PTFE FLEXIBLE HOSE ASSEMBLY OF A NOMINAL PRESSURE EQUAL TO 10500 KPA WITH 8 DEGREE 30 MINUTES FITTING IN TITANIUM - PRODUCT STANDARD |
| PREN 3273 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES - DYNAMIC BEAM SEAL END FOR ELBOWS, TEES AND CROSSES - GEOMETRIC CONFIGURATION |
| PREN 4030 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BULKHEAD RUN |
| PREN 3854 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL IN TITANIUM ALLOY TI-P64001 - FERRULES, WELDED |
| ISO 7319:1992 | Aerospace Fluid systems Interface of 24 degree cone metric couplings |
| ISO 485:1973 | Aircraft water-methanol pressure connections |
| ISO 7314:2002 | Aerospace Fluid systems Metal hose assemblies |
| PREN 2901 : 200P2 | AEROSPACE SERIES - CLAMPS, LOOP ("P" TYPE) WITH RUBBER CUSHIONING IN CORROSION RESISTING STEEL - DIMENSIONS - MASSES |
| PREN 3269 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - BLIND FERRULES WITH DYNAMIC BEAM SEAL END |
| PREN 3635 : 200P2 | AEROSPACE SERIES - WELD LIP - GEOMETRICAL CONFIGURATION |
| ISO 8625-2:1991 | Aerospace Fluid systems Vocabulary Part 2: General terms and definitions relating to flow |
| ISO 1034:1973 | Aircraft — Ground air-conditioning connections |
| PREN 3267 : 200P1 | AEROSPACE SERIES - WASHER, BULKHEAD IN TITANIUM ALLOY |
| ISO 3323:1987 | Aircraft — Hydraulic components — Marking to indicate fluid for which component is approved |
| ISO 2026:1974 | Aircraft Connections for starting engines by air |
| PREN 3268 : 200P3 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - PRESSURE PLUGS |
| PREN 3855 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL IN TITANIUM ALLOY TI-P64001 - CAPS |
| PREN 4026 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES |
| PREN 4032 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - THRUST WIRE |
| ISO 7313:1984 | Aircraft High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) |
| PREN 2253 : 2 | AEROSPACE SERIES - FLEXIBLE HOSE ASSEMBLIES IN ELASTOMERS - TYPE 1 - TECHNICAL SPECIFICATION |
| ISO 2685:1998 | Aircraft — Environmental test procedure for airborne equipment — Resistance to fire in designated fire zones |
| ISO 8775:1988 | Aerospace Gaseous oxygen replenishment connection for use in fluid systems (new type) Dimensions (Inch series) |
| TR 4053 : 1 | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS IN TITANIUM ALLOY - ASSEMBLY RECOMMENDATIONS |
| ISO 10583:1993 | Aerospace fluid systems — Test methods for tube/fitting assemblies |
| PREN 3566 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ADAPTERS WITH LOCKING RING |
| ISO 6771:2007 | Aerospace Fluid systems and components Pressure and temperature classifications |
| PREN 4019 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, WELDED |
| PREN 2900 : 200P2 | AEROSPACE SERIES - CLAMPS - TECHNICAL SPECIFICATION |
| PREN 4025 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 MINUTES, BULKHEAD |
| PREN 3867 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - FLANGES IN TITANIUM ALLOY TI-P64001 |
| PREN 3243 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - FERRULE, WELDED, WITH DYNAMIC BEAM SEAL END |
| ISO 12:1987 | Aerospace — Pipelines — Identification |
| ISO 102:1990 | Aircraft — Gravity filling orifices |
| PREN 4023 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 DEGREES |
| PREN 3631 : 200P2 | AEROSPACE SERIES - FLUID FITTINGS, FLAGED, 90 DEGREES ELBOWED - SEALING BY O-RING FOR 0,8 MM THICK TUBES |
| PREN 3247 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD, WELDED |
| PREN 3245 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, REDUCER |
| PREN 3853 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - STRAIGHT UNIONS, THREADED |
| ISO 4412-1:1991 | Hydraulic fluid power — Test code for determination of airborne noise levels — Part 1: Pumps |
| ISO 9526:1990 | Fruits, vegetables and derived products — Determination of iron content by flame atomic absorption spectrometry |
| ISO 7315:1988 | Aerospace "P" clamps (loop clamps) for fluid systems Envelope dimensions |
| ISO 9206:2016 | Aerospace series Constant displacement hydraulic motors General specifications |
| ISO 5859:2014 | Aerospace series — Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components |
| PREN 4031 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - NUTS FOR WELDED UNION |
| PREN 3717 : 200P1 | AEROSPACE SERIES - TUBES - SELECTION FOR ENGINES FLUID SYSTEMS |
| PREN 4022 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD, WELDED |
| ISO 6772:2012 | Aerospace — Fluid systems — Impulse testing of hydraulic hose, tubing and fitting assemblies |
| ISO 11217:1993 | Aerospace Hydraulic system fluid contamination Location of sampling points and criteria for sampling |
| ISO 9634:1994 | Aerospace Fluid systems Dimensions of plastic protective caps and plugs |
| PREN 4185 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BULKHEAD LONG |
| PREN 4182 : 200P1 | PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEE, REDUCED |
| ISO 8625-1:1993 | Aerospace Fluid systems Vocabulary Part 1: General terms and definitions related to pressure |
| PREN 4187 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD, LONG |
| PREN 4191 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD BRANCH, LONG |
| PREN 3718 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF TUBES |
| PREN 3857 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - ELBOWS 90 DEGREES, WELDED |
| PREN 4188 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD, LONG, WELDED |
| ISO 11218:2017 | Aerospace Cleanliness classification for hydraulic fluids |
| ISO 7169:2014 | Aerospace Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa Procurement specification, inch/metric |
| PREN 3856 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - SWIVEL NUTS FOR THRUST WIRE |
| PREN 3788 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES - PROTECTIVE CAPS |
| ISO 7661:1984 | Aerospace Fluid systems Clamp blocks for tube lines having axial alignment Design standard and qualification testing Metric series |
| ISO 5855-3:1999 | Aerospace MJ threads Part 3: Limit dimensions for fittings for fluid systems |
| ISO 7258:1984 | Polytetrafluoroethylene (PTFE) tubing for aerospace applications Methods for the determination of the density and relative density |
| PREN 3689 : 200P1 | AEROSPACE SERIES - T-RING FILLERS IN TITANIUM ALLOY FOR WELDING PIPES - 28000 KPA NOMINAL PRESSURE |
| PREN 3852 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - STRAIGHT UNIONS, WELDED, THREADED |
| PREN 3264 : 200P3 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - THRUST WIRE NUTS |
| PREN 3274 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES - THREAD END - GEOMETRIC CONFIGURATION |
| PREN 3246 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD |
| PREN 4186 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - CROSS UNIONS |
| TR 4052 : 1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY - ASSEMBLY RECOMMENDATIONS |
| PREN 3633 : 200P1 | AEROSPACE SERIES - INSTALLATION HOLE FOR FLUID FITTINGS, FLANGED |
| PREN 3244 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, DOUBLE ENDED |
| PREN 3789 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES - PROTECTIVE PLUGS WITH EXTERNAL THREADS |
| ISO 9662:1994 | Aircraft equipment Environmental and operating conditions for airborne equipment Humidity, temperature and pressure tests |
| PREN 3688 : 200P1 | AEROSPACE SERIES - T-RING FILLERS IN TITANIUM ALLOY FOR WELDING PIPES - 14000 KPA NOMINAL PRESSURE |
| PREN 3869 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - SEALS IN FLUOROCARBON RUBBER AND ARMATURE IN ALUMINIUM ALLOY |
| PREN 3851 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - SWIVEL NUTS, STRAIGHT |
| PREN 3588 : 200P2 | AEROSPACE SERIES - LIGHTWEIGHT PTFE FLEXIBLE HOSE ASSEMBLY OF A NOMINAL PRESSURE EQUAL TO 28000 KPA WITH 8 DEGREE 30 MINUTES FITTING IN TITANIUM - PRODUCT STANDARD |
| PREN 2902 : 200P2 | AEROSPACE SERIES - CLAMPS, LOOP ("P" TYPE) WITH RUBBER CUSHIONING IN ALUMINIUM ALLOY - DIMENSIONS - MASSES |
| ISO 2563:2009 | Aircraft ducting and piping Profile dimensions for flanges of V-band couplings |
| PREN 2672 : 200P1 | AEROSPACE SERIES - DESIGN AND CONSTRUCTION OF PIPELINES FOR FLUIDS IN LIQUID OR GASEOUS CONDITION - DESIGN OF RIGID LINES |
| PREN 4189 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BULKHEAD BRANCH, LONG |
| ISO 9939:1994 | Aerospace Pressure re-oiling connection (new type) |
| PREN 3266 : 200P2 | AEROSPACE SERIES - PIPE COUPLING IN TITANIUM ALLOY - BULKHEAD NUTS |
| ISO 9938:1994 | Aerospace Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/28 000 kPa Procurement specification |
| ISO 2942:2004 | Hydraulic fluid power Filter elements Verification of fabrication integrity and determination of the first bubble point |
| PREN 4190 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, WITH SWIVEL NUT ON RUN |
| ISO 7257:2016 | Aircraft Hydraulic tubing joints and fittings Rotary flexure test |
| ISO 8479:1986 | Aerospace "Q" clamps (centre-mounted clamps) for fluid systems Dimensions |
| PREN 2671 : 200P1 | AEROSPACE SERIES - DESIGN AND CONSTRUCTION OF PIPELINES FOR FLUIDS IN LIQUID OR GASEOUS CONDITION - OUTLINE AND TERMS |
| ISO 5887:1981 | Aircraft Joints for connecting crew members' regulator masks to oxygen sources |
| ISO 10502:2012 | Aerospace — Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10 500 kPa — Technical specifications and requirements |
| PREN 3580 : 200P1 | AEROSPACE SERIES - STANDARD WEIGHT PTFE FLEXIBLE HOSE ASSEMBLY OF A NOMINAL PRESSURE EQUAL TO 21000 KPA WITH 8 DEGREE 30 MINUTES FITTING IN TITANIUM - PRODUCT STANDARD |
| PREN 3690 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD, LONG |
| PREN 3270 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - BLANKING PLUGS WITH LOCKING RING |
| PREN 4051 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY - PORT CONNECTION |
| ISO 7137:1995 | Aircraft — Environmental conditions and test procedures for airborne equipment |
| PREN 3858 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - THRUST WIRES IN STEEL FE-PA13 |
| PREN 3275 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES UP TO 28000 KPA DYNAMIC BEAM SEAL - METRIC SERIES - TECHNICAL SPECIFICATION |
| PREN 2903 : 200P2 | AEROSPACE SERIES - CLAMPS - WORM DRIVE - DIMENSIONS - MASSES |
| PREN 3630 : 200P1 | AEROSPACE SERIES - FLUID FITTINGS, FLANGED, STRAIGHT - SEALING BY O-RING FOR 0,8 MM THICK TUBES |
| ISO 9538:2017 | Aerospace series — Hydraulic tubing joints and fittings — Planar flexure test |
| ISO 8574:2004 | Aerospace Hydraulic system tubing Qualification tests for bent tubes |
| PREN 2904 : 200P2 | AEROSPACE SERIES - CLAMPS - SADDLE IN ALUMINIUM ALLOY - DIMENSIONS - MASSES |
| ISO 1023:1974 | Aircraft High pressure air charging valves |
| ISO 3601-1:2012 | Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
| PREN 3868 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - FLANGE CONNECTORS, WELDED, IN TITANIUM ALLOY TI-P64001 |
| PREN 3272 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES - DYNAMIC BEAM SEAL END FOR NIPPLE, WELDED - GEOMETRIC CONFIGURATION |
| ISO 45:1990 | Aircraft — Pressure refuelling connections |
| PREN 4021 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD |
| PREN 4024 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 45 DEGREE WELDED END WITH THRUST WIRE NUT |
| PREN 4029 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES BULKHEAD BRANCH |
| ISO 451:1976 | Aircraft Pressure re-oiling connection |
| PREN 3658 : 200P1 | AEROSPACE SERIES - TUBE BEND RADII, FOR ENGINE APPLICATION - DESIGNSTANDARD |
| ISO 3601-3:2005 | Fluid power systems O-rings Part 3: Quality acceptance criteria |
| ISO 450:1976 | Aircraft — Connection for water of drinkable quality |
| PREN 3248 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ADAPTERS, REDUCED PIPE END WITH LOCKING RING |
| ISO 8278:2016 | Aerospace series Hydraulic, pressure compensated, variable delivery pumps General requirements |
| PREN 3663 : 200P1 | AEROSPACE SERIES - PIPE COUPLING - O-RINGS IN ACRYLONITRILE-BUTADIENE ELASTOMER (NBR), 75 IRHD, TEMPERATURE RANGE: -55 DEGREES C TO 135 DEGREES C |
| PREN 2673 : 200P1 | AEROSPACE SERIES - DESIGN AND CONSTRUCTION OF PIPELINES FOR FLUIDS IN LIQUID OR GASEOUS CONDITION, RIGID LINES - MANUFACTURE |
| PREN 4017 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE |
| ISO 4412-2:1991 | Hydraulic fluid power — Test code for determination of airborne noise levels — Part 2: Motors |
| PREN 4027 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BRANCH WITH SWIVEL NUT |
| PREN 4192 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD BRANCH |
| PREN 3572 : 200P1 | AEROSPACE SERIES - PTFE FLEXIBLE HOSE ASSEMBLY WITH CONVOLUTED INNER TUBE OF A NOMINAL PRESSURE UP TO 6800 KPA AND 8 DEGREE 30 MINUTES FITTING IN TITANIUM - PRODUCT STANDARD |
| ISO 8625-3:1991 | Aerospace Fluid systems Vocabulary Part 3: General terms and definitions relating to temperature |
| ISO 3161:1999 | Aerospace — UNJ threads — General requirements and limit dimensions |
| PREN 4018 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 90 DEGREES WITH THRUST WIRE NUT |
| ISO 8575:2016 | Aerospace — Fluid systems — Hydraulic system tubing |
| ISO 8177:2015 | Aerospace Omega clamps (saddle clamps) for fluid systems Dimensions |
| PREN 3584 : 200P2 | AEROSPACE SERIES - LIGHTWEIGHT PTFE FLEXIBLE HOSE ASSEMBLY OF A NOMINAL PRESSURE EQUAL TO 21000 KPA WITH 8 DEGREE 30 MINUTES FITTING IN TITANIUM - PRODUCT STANDARD |
| PREN 4193 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD LONG |
| ISO 6773:1994 | Aerospace Fluid systems Thermal shock testing of piping and fittings |
£139.25
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.