SAE AMS 2645 : 1995

Withdrawn

FLUORESCENT PENETRANT INSPECTION

Available format(s)

Hardcopy , PDF

Withdrawn date

01-02-1995

Language(s)

English

Published date

01-01-1995

Publisher

SAE International

Committee	AMS-K
DocumentType	Standard
Pages	2
PublisherName	SAE International
Status	Withdrawn

Standards	Relationship
MIL I 6866 : B	Similar to

SAE AMS 4222 : 2017	ALUMINUM ALLOY CASTINGS, SAND, MODERATE HEAT RESISTANCE 4.0CU - 2.0NI - 1.5MG - 0.12TI (242.0P) SOLUTION HEAT TREATED AND STABILIZED
SAE MA 4368 : 2018	NUT, PLAIN ROUND - SPANNER WRENCHING, SHAFT MOUNTED, UNS S66286, PROCUREMENT SPECIFICATION FOR, METRIC
MIL-C-27505 Revision B:1967	Cartridge, Engine Starter MXU-4A/A
SAE MA 1568 : 2018	NUT, SELF LOCKING - UNS S66286, 425 DEGREE C AND 650 DEGREE C, 1100 MPA, MJ THREAD, PROCUREMENT SPECIFICATION FOR, METRIC
SAE AS 7330 : 2012	RINGS, RETAINING - SPIRAL WOUND, UNIFORM SECTION CORROSION RESISTANT STEEL PROCUREMENT SPECIFICATION FOR
SAE MA 4070 : 2013	PINS, PROCUREMENT SPECIFICATION FOR, METRIC
SAE MA 1943 : 2012	NUTS, SELF-LOCKING, UNS N07001, 760 DEGREE C, 1100 MPA AND 1210 MPA, PROCUREMENT SPECIFICATION FOR, METRIC
SAE AS 1177 : 2018	NONDESTRUCTIVE INSPECTION STANDARDS FOR BOLTS AND SCREWS
SAE MA4189A:2021	SCREW, MACHINE, 100° CSK, FLAT HEAD, OFFSET CRUCIFORM RECESS, FULL SHANK, UNS S66286, MJ THREAD, METRIC
MIL BULL 343 : A	DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF
SAE MA 3399 : 2012	CLAMP - TUBE SUPPORT, SPRING CLIPS AND PTFE CUSHION PROCUREMENT SPECIFICATION FOR
SAE AMS 2680 : 2010	ELECTRON-BEAM WELDING, FOR FATIGUE CRITICAL APPLICATIONS
SAE MAM 4427 : 2003	MAGNESIUM ALLOY SAND CASTINGS 4.0Y - 2.3ND - 0.7ZR (WE43A - T6) SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 2689 : 2016	FUSION WELDING TITANIUM AND TITANIUM ALLOYS
SAE MA 1784 : 2012	SPACERS AND WASHERS, PROCUREMENT SPECIFICATION FOR, METRIC
SAE AMS 4227 : 1988	ALUMINUM ALLOY, CASTINGS SAND, 8.0CU 6.0MG 0.50MN 0.50NI, AS CAST
SAE AMS 4420 : 2017	MAGNESIUM ALLOY CASTINGS, SAND, 6AL - 3ZN (AZ63A-F), AS CAST
SAE MA 1937 : 2018	NUT, HEX, FREE RUNNING, PROCUREMENT SPECIFICATION FOR, METRIC
SAE AMS 5373 : 2017	ALLOY CASTINGS, SAND, CORROSION AND HEAT RESISTANT, 16CO - 29CR - 4.5W, AS CAST, UNS R30006
SAE AMS5328E:1987(S2017)	STEEL CASTINGS, INVESTMENT, 0.80CR - 1.8NI - 0.35MO (0.28 - 0.36C) (SAE 4330 MODIFIED), ANNEALED
SAE AMS 4146 : 2014	ALUMINUM ALLOY FORGINGS AND ROLLED OR FORGED RINGS, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061 - T4), SOLUTION HEAT TREATED AND NATURALLY AGED
SAE MA 2538 : 2015	GASKET, METAL C-RING SEAL NICKEL ALLOY, CORROSION AND HEAT RESISTANT, METRIC PROCUREMENT SPECIFICATION FOR
SAE AMS 5351 : 2017	STEEL CASTINGS, SAND, CORROSION AND MODERATE HEAT RESISTANT, 13CR, NORMALIZED AND TEMPERED
SAE AMS 5358 : 2017	STEEL CASTINGS, INVESTMENT, CORROSION RESISTANT, 18CR - 9NI, SOLUTION HEAT TREATED
SAE MA 4036 : 2012	RINGS, RETAINING - TAPERED WIDTH, UNIFORM THICKNESS CORROSION RESISTANT, PROCUREMENT SPECIFICATION FOR, METRIC
SAE AMS 5412 : 2012R(2018)	STEEL CASTINGS, VACUUM MELTED, VACUUM CAST, INVESTMENT, CORROSION RESISTANT 13CR - 8.0NI - 2.2MO - 1.1AI (195,000 PSI (1344 MPA) TENSILE STRENGTH (CONDITION H1000) HOMOGENIZED, SOLUTION, AND PRECIPITATION HEAT TREATED
SAE AMS 7482 : 1995	STUDS - STEEL, CORROSION AND HEAT RESISTANT,ROLL THREADED AFTER HEAT TREATMENT, 1800F (980 C) SOL HEAT TREATED
FAA AC 33-6 : 2017	WELD REPAIR OF ALUMINUM CRANKCASES AND CYLINDERS OF PISTON ENGINES
MIL-Q-22631 Revision B:1964	QUALITY CONTROL OF METAL WROUGHT PRODUCTS EXCEPT FORGINGS PROCURED TO NON-GOVERNMENTAL SPECIFICATIONS
SAE AMS 5348 : 2017	STEEL CASTINGS, TUBULAR, CENTRIFUGAL, CORROSION RESISTANT, 15CR - 4.6NI - 0.22 (CB+TA) - 2.8CU, SOLUTION HEAT TREATED
SAE AMS 5409 : 1984	ALLOY CASTING, INVESTMENT, CORROSION AND HEAT RESISTANT 61NI - 16CR - 8.5CO - 1.8MO - 2.6W - 0.8CB - 3.4TI - 1.8TA - 3.4A1- 0.010B - 0.06ZR (0.03 - 0.08C), VACUUM MELTED, VACUUM CAST, AS CAST
SAE AMS 4231 : 1983	CASTINGS, SAND - 4.5CU - 1.1SI, SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS5341:2012(S2017)	STEEL CASTINGS, INVESTMENT, CORROSION RESISTANT, 19.5CR - 10.5NI - 0.25S (TYPE 303), SOLUTION HEAT TREATED
SAE MA 4035 : 2012	RINGS, RETAINING - SPIRAL WOUND, UNIFORM SECTION CORROSION RESISTANT, PROCUREMENT SPECIFICATION FOR, METRIC
SAE MAM 4247 : 1994	ALUMINUM ALLOY, HAND FORGINGS 7.7ZN - 2.4MG - 1.6CU - 0.16CR (7049-T7352) SOLUTION HEAT TREATED, STRESS RELIEVED BY COMPRESSION, AND PRECIPITATION HEAT TREATED
SAE AMS 5384 : 2017	ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT, 53NI - 18CR - 18CO - 4.0MO - 2.9TI - 2.9AL - 0.006B, VACUUM-MELTED, VACUUM-CAST, SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 4240 : 1982	CASTINGS, SAND - 10MG, SOLUTION HEAT TREATED & NATURALLY AGED
SAE MAM 4248 : 1993	ALUMINUM ALLOY, HAND FORGINGS AND ROLLED RINGS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T652) SOLUTION HEAT TREATED, STRESS RELIEVED BY COMPRESSION, AND PRECIPITATION HEAT TREATED
SAE AMS 5571J:2012(R2018)	STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED
SAE J 426 : 2018	LIQUID PENETRANT TEST METHODS
SAE AMS 5330 : 2015	STEEL CASTINGS, INVESTMENT, 0.80CR - 1.8NI - 0.35MO (0.38 - 0.46C) (SAE 4340 MODIFIED), ANNEALED
SAE AMS 5584 : 2012	STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS AND WELDED HYDRAULIC TUBING, 17CR - 12NI - 1.5MO - 0.03C MAX, COLD DRAWN, 1/8 HARD TEMPER
SAE MAM 4141 : 1990	ALUMINUM ALLOY, DIE FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73) SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 5361G : 2013(S 2019)	STEEL CASTINGS, SAND AND CENTRIFUGAL, CORROSION AND HEAT RESISTANT, 18.5CR - 13.5NI - 2.1MO, SOLUTION HEAT TREATED
SAE AMS 5363 : 2017	STEEL CASTINGS, SAND AND CENTRIFUGAL, CORROSION AND HEAT RESISTANT, 18.5CR - 10.5NI - 0.90 (CB+TA), SOLUTION HEAT TREATED
SAE AMS 4440 : 1999	MAGNESIUM ALLOY CASTINGS, SAND 3.5CE - 0.70ZR (EK41A-T5) PRECIPITATION HEAT TREATED
SAE AMS 5375 : 1982	ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 65.5CO - 25CR - 1.8NI - 5.0W AS CAST
SAE AMS 7898 : 2002	TUNGSTEN SHEET, STRIP, PLATE, AND FOIL, PRESSED, SINTERED, AND WROUGHT
MS9558 Revision E:1993	BOLT, MACHINE DOUBLE HEXAGON EXTENDED WASHER HEAD CORROSION AND HEAT RESISTANT STEEL, .3125-24 UNJF-3A
MIL R 25532 : A	ROCKET MOTOR, AERONAUTICAL, QUALIFICATION TEST FOR
SAE AMS 5389 : 1987(R2017)	ALLOY CASTINGS, SAND, CORROSION AND HEAT RESISTANT, 55NI - 16.5CR - 17MO - 4.5W - 5.8FE - 0.40V, SOLUTION HEAT TREATED
SAE AMS 4444 : 2017	MAGNESIUM ALLOY CASTINGS, SAND, 6.0ZN - 0.80ZR (ZK61A-T5), PRECIPITATION HEAT TREATED
SAE AMS 4275 : 2017	CASTINGS, PERMANENT MOLD, 6.2SN - 1CU - 1NI, STRESS RELIEVED
SAE AMS 4425 : 2017	MAGNESIUM ALLOY CASTINGS, SAND, 5.8ZN - 2.5RE - 0.70ZR (ZE63-T6), SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 5395 : 2018	ALLOY IRON CASTINGS, DUCTILE, SAND, CORROSION RESISTANT, 22NI (2.5 - 3.0C), AS CAST