|
SAE AMS 5349 : 2013
|
STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 13CR, FREE MACHINING; HARDENED AND TEMPERED |
|
MIL-DTL-32460-3 Base Document:2013
|
FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
|
MIL-DTL-55302-94 Revision F:2010
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, INSERT (INSULATOR), RECTANGULAR, POLARIZED, REMOVABLE, CRIMP TYPE HERMAPHRODITIC CONTACTS (.100 INCH SPACING) |
|
SAE AS 4468 G : 2017
|
HOSE ASSEMBLY, 125 PSI, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION |
|
MIL-DTL-55302-190 Revision B:2011
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 100 POSITIONS, PRINTED WIRING BOARD (.075 SPACING) |
|
MIL-DTL-32480-1 Base Document:2014
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, FLARELESS MALE TO ORFS MALE |
|
MIL DTL 32372/4 : A
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS BULKHEAD |
|
MIL DTL 83513/30 : B
|
CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, PIN CONTACTS, 4 ROW, SOLDER TYPE, STANDARD PROFILE, 100 CONTACTS, PRINTED CIRCUIT BOARD |
|
DSCC 85034 : E
|
HOLDER, ELECTRICAL CARD, METAL, CARD GUIDE |
|
SAE AS 4723 : 2012
|
INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, KEY LOCKED, PLASTIC SELF LOCKING DEVICE, SOLID FILM LUBRICANT, PROCUREMENT SPECIFICATION FOR |
|
MS51819 Revision E:1987
|
ADAPTER, STRAIGHT, PIPE TO TUBE MALE PIPE END, FLARELESS TYPE, HYDRAULIC |
|
MIL DTL 83413/12 : A
|
CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: GROUNDING CLAMP CONNECTOR FOR TYPES 1 AND 3 GROUNDING ASSEMBLIES, STAINLESS STEEL CLIP, ELECTRICAL |
|
BS EN 6092:2016
|
AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG |
|
MS51510 Revision D:2017
|
TEE, TUBE, 37 DEGREE FLARED |
|
MS51525 Revision B:1988
|
FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED |
|
MS 39210 : K
|
NUTS, TUBE COUPLING - SAFETY SLEEVE COMPRESSION TYPE |
|
MIL-DTL-52471-10 Revision B:2008
|
HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R12 FOUR-SPIRAL-WRAP REINFORCEMENT HOSE |
|
MIL DTL 52525/35 : B
|
FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE |
|
MIL-DTL-32480-5 Base Document:2014
|
FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, FLARELESS MALE TO ORFS BULKHEAD |
|
MS51814 Revision E:1987
|
NIPPLE, TUBE, BULKHEAD, REGULAR HEX, FLARELESS TYPE, HYDRAULIC |
|
MIL DTL 32371/10 : 0
|
FITTINGS, HYDRAULIC TUBE, SLEEVE, DOUBLE ANGLE |
|
MIL DTL 32371/4 : 0
|
FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, TEE, SPHERICAL ON BRANCH |
|
SAE AS 4841 : 2017
|
FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION |
|
SAE AMS 5346 : 2014
|
STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB (NB) - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H925), 180 KSI (1241 MPA) TENSILE STRENGTH (15-5) |
|
MIL-DTL-52525-10 Revision D:2011
|
FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT |
|
16/30354034 DC : 0
|
BS EN 4854-1 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, NARROW SERIES - DIMENSIONS AND LOADS |
|
MIL DTL 32372/12 : A
|
FITTING, ADAPTER, TEE, HYDRAULIC AND PNEUMATIC, NPTF MALE ON BRANCH TO ORFS MALE RUN TO RUN |
|
MS51519 Revision C:2017
|
NIPPLE, TUBE, LARGE HEX, FOR USE WITH O-RING, 37 DEGREE FLARED |
|
DSCC 93007 : B
|
CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 296 CONTACT POSITIONS |
|
MIL-DTL-83796-10 Revision A:2014
|
HOSE ASSEMBLY, RUBBER, LIGHT WEIGHT, INTERNAL SUPPORT COIL, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE |
|
MIL-DTL-55302-163 Revision D:2004
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG, 72, 84, 96, AND 120 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC |
|
MIL-DTL-52525-7 Revision D:2011
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, SHORT DROP |
|
AN 915 : 0014
|
ELBOW, PIPE, 45 DEGREES |
|
MIL DTL 32464/6 : 0
|
MALE ADAPTER, UNION CROSS, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 37 DEGREES SPHERICAL ON BRANCH, 1500-3000 PSI |
|
MS 39206 : G
|
ADAPTERS, STRAIGHT, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, MALE PIPE END |
|
MIL-DTL-32480 Base Document:2014
|
ADAPTER, HYDRAULIC AND PNEUMATIC, FLARELESS TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR |
|
MIL-DTL-55302-5 Revision F:2008
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, STRAIGHT-THRU, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING) |
|
MIL-DTL-8783 Revision D:2009
|
CLAMP, HOSE, FLAT BAND 500 DEGREES F, GENERAL SPECIFICATION FOR |
|
MIL DTL 23971 : E
|
POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR |
|
MIL-DTL-55302-93 Revision F:2010
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, INSERT (INSULATOR), RECTANGULAR, POLARIZED, REMOVABLE CRIMP TYPE, HERMAPHRODITIC CONTACTS (.100 INCH SPACING) |
|
17/30369678 DC : 0
|
PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
|
MIL-DTL-55302-90 Revision F:2008
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, RIGHT ANGLE, HERMAPHRODITIC CONTACT (.100 INCH SPACING) |
|
SAE AS 4892 : 2012
|
INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED, PROCUREMENT SPECIFICATION FOR |
|
MIL DTL 32464/1 : 0
|
MALE ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
MIL DTL 32464/12 : 0
|
MALE ADAPTER, TEE, 37 DEGREES SPHERICAL TO ANPT, ANPT ON BRANCH, 1500-3000 PSI |
|
MS 27086 : D
|
ELBOW, NIPPLE END, FLARED, TUBE TO HOSE - 90 DEGREE SWIVEL NUT |
|
MIL-DTL-83796-11 Revision A:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE |
|
MS 27087 : D
|
ELBOW, NIPPLE END, FLARED, TUBE TO HOSE - 45 DEGREE SWIVEL NUT |
|
MIL-DTL-53072 Revision F:2017
|
CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM - APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
|
SAE AS 5960 : 2013
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC BRAID REINFORCED, 5080 PSI (35000 KPA), 400 DEGREES F (204 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS |
|
MIL DTL 83513/32 : B
|
CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, SOCKET CONTACTS, 3 ROW, SOLDER TYPE, STANDARD PROFILE, 51 CONTACTS, PRINTED CIRCUIT BOARD |
|
MIL-DTL-45916 Revision C:2014
|
INSERT, SCREW THREAD - THREAD CUTTING AND THREAD FORMING |
|
MS 35758 : D
|
CUPS, GREASE, MANUAL FEED |
|
MIL-DTL-55302-113 Revision F:2006
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, STRAIGHT-THRU, 30 THRU 110 CONTACT POSITIONS, CRIMP REMOVABLE CONTACTS (.100 SQ. GRID) |
|
MIL-DTL-83513-13 Revision D:2009
|
CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, SOCKET CONTACTS, 2 ROW, SOLDER TYPE, NARROW PROFILE, 9 THROUGH 37 CONTACTS, PRINTED CIRCUIT BOARD |
|
MIL-DTL-83503 Revision C:2005
|
CONNECTORS, ELECTRICAL, FLAT CABLE, AND/OR PRINTED WIRING BOARD, NONENVIRONMENTAL, GENERAL SPECIFICATION FOR |
|
MIL-DTL-5002 Revision E:2011
|
SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
|
MS 39199 : G
|
NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE, BULKHEAD MOUNTING |
|
MS51825 Revision H:2008
|
SLEEVES, CLINCHES, TUBE FITTING, FLARELESS TYPE, HYDRAULIC |
|
MIL-DTL-52525-32 Revision A:2008
|
FITTINGS, HOSE, REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPIRAL-WRAP REINFORCEMENT HOSE |
|
MS51534 Revision A:1979
|
REDUCER, TUBE, 37 DEGREE FLARED |
|
MS51811 Revision E:1987
|
TEE, TUBE, FLARELESS TYPE HYDRAULIC |
|
MIL-DTL-52525-44 Base Document:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE |
|
MIL-DTL-32480-6 Base Document:2014
|
FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, FLARELESS, MALE TO ORFS BULKHEAD |
|
MIL DTL 32372/8 : A
|
FITTING, ADAPTER, 45 DEGREE, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS FEMALE SWIVEL |
|
MIL DTL 32372/9 : A
|
FITTING, ADAPTER, 90 DEGREE, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS FEMALE SWIVEL |
|
MIL DTL 613 : D
|
GRAPNELS, MARINE, TRIP WIRE, AND CRASH TRUCK |
|
AN 849 : 0013
|
NIPPLE, HOSE |
|
AN 838 : 0009
|
ELBOW, TUBE TO HOSE, 90 DEGREES |
|
MIL-DTL-52525-1 Revision D:2011
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT, SAE-J516 TYPE, FOR ASSEMBLY WITH SAE-J517, TYPE 100R2 HOSE |
|
MS51501 Revision C:2016
|
NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, SHORT |
|
MS51528 Revision B:1988
|
FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; ELBOW, TUBE TO BOSS, 45 DEGREE, O-RING, 37 DEGREE FLARED |
|
MIL-DTL-52525-43 Base Document:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT |
|
MIL DTL 32372/7 : A
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS FEMALE SWIVEL |
|
MS51816 Revision E:1987
|
ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC |
|
MIL DTL 32371/3 : 0
|
FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, 90 DEGREES ELBOW |
|
MIL DTL 52525/11 : C
|
FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE |
|
MS51521 Revision C:2017
|
ELBOW, TUBE, 90 DEGREE, SWIVEL, 37 DEGREE FLARED |
|
MIL DTL 32372/6 : A
|
FITTING, ADAPTER, 90 DEGREE, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS BULKHEAD |
|
MIL-DTL-83513-27 Revision D:2009
|
CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, SOCKET CONTACTS, 4 ROW, SOLDER TYPE, 100 CONTACTS, PRINTED CIRCUIT BOARD |
|
MIL DTL 32371/6 : 0
|
FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, NIPPLE TUBE, REGULAR HEX, LONG |
|
MIL-DTL-23599 Revision C:2017
|
HOOK, RESCUE |
|
MIL-DTL-55302-161 Revision D:2004
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE, 160 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC |
|
MIL DTL 83513/33 : B
|
CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, SOCKET CONTACTS, 4 ROW, SOLDER TYPE, STANDARD PROFILE, 100 CONTACTS, PRINTED CIRCUIT BOARD |
|
17/30363748 DC : DRAFT JUL 2017
|
BS EN 3660-033 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 033: STAINLESS STEEL BANDING BAND, STYLE Z, FOR ATTACHMENT OF INDIVIDUAL AND/OR OVERALL SCREENS TO CABLE OUTLETS - PRODUCT STANDARD |
|
MIL-DTL-32372 Revision A:2016
|
FITTING, ADAPTER, HYDRAULIC AND PNEUMATIC, NPTF TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F |
|
MS 27077 : D
|
FLANGE, SWIVEL, RETAINING |
|
14/30310863 DC : 0
|
BS EN 4833 - AEROSPACE SERIES - PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING - FLARED END - INCH SERIES - WITH EXTRA FINE THREAD PITCH |
|
AN 815 : 0010
|
UNION - FLARED TUBE |
|
A-A-55469 Revision B:2015
|
CONNECTORS, ELECTRICAL, PLUGS, TIP (TEST POINT PLUG, BANANA PLUG) GENERAL REQUIREMENTS FOR |
|
MIL DTL 85052/14 : 0
|
CLAMP, LOOP, STAINLESS STEEL, 500 DEGREES F, SILICONE RUBBER, FABRIC REINFORCED |
|
MS51509 Revision D:2017
|
ELBOW, TUBE, 45 DEGREE, BULKHEAD, 37 DEGREE FLARED |
|
MS51524 Revision C:2017
|
TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED |
|
MIL-DTL-55302-61 Revision G:2004
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, AND 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
|
MS51502 Revision C:2016
|
NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, LONG |
|
MIL-DTL-52525-40 Revision B:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT |
|
MIL-DTL-55302-63 Revision H:2008
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
|
MIL-DTL-55302-62 Revision H:2004
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
|
MIL DTL 13220/3 B : 2015
|
HOOK, SLIP, EYE |
|
MIL DTL 8878 : L
|
TURNBUCKLES, POSITIVE SAFETYING, GENERAL SPECIFICATION FOR |
|
MS51529 Revision B:1988
|
FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON BRANCH, O-RING |
|
MIL DTL 32234/9 : 0
|
CONNECTOR, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, KEYING PINS AND BUSHINGS |
|
MS 27076 : E
|
NIPPLE, STRAIGHT, SWIVEL FLANGE |
|
AN846 Revision 9:2013
|
ELBOW, HOSE, 45 DEGREES |
|
MS51532 Revision B:1988
|
FITTING, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP, TUBE, 37 DEGREE FLARED |
|
MIL DTL 32372/2 : A
|
FITTING, ADAPTER, 45 DEGREE ELBOW, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS MALE |
|
MIL-DTL-32480-7 Base Document:2014
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, FLARELESS, MALE TO ORFS, FEMALE SWIVEL |
|
MS51520 Revision C:2017
|
NIPPLE, TUBE, BULKHEAD, 37 DEGREE FLARED |
|
MIL-DTL-83796-4 Revision C:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS WITH LOCKWIRE HOLE |
|
MS 9193 : A
|
NIPPLE, TUBE - SAE-AMS5639, BOSS |
|
MIL-DTL-52471-1 Revision C:2008
|
HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R1, SINGLE-WIRE BRAIDED REINFORCEMENT HOSE |
|
MIL-DTL-13220 Revision G:2015
|
HOOK, SLIP (FOR USE WITH WIRE ROPE OR CHAINS) |
|
MIL DTL 52525/6 : C
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE |
|
MIL DTL 39030 : F
|
DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR |
|
SAE AMS 5364 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS, 19.5CR - 10.5NI - 0.65CB (CF-8C), SOLUTION HEAT TREATED |
|
MIL DTL 83798/4 : D
|
FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARELESS, SWIVEL NUT, STRAIGHT |
|
MS51507 Revision D:2017
|
ELBOW, TUBE, 90 DEGREE, 37 DEGREE BULKHEAD, FLARED |
|
MS51516 Revision C:2017
|
TEE, BULKHEAD ON RUN 37 DEGREE FLARED |
|
MS51508 Revision D:2017
|
ELBOW, PIPE TO TUBE, 45 DEGREE, MALE PIPE END, 37 DEGREE FLARED |
|
MIL DTL 32371/9 : 0
|
FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, TEE, BULKHEAD, SPHERICAL ON RUN |
|
MIL DTL 52525/36 : B
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE |
|
MIL DTL 52525/15 : C
|
FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 90 DEGREES BENT TUBE |
|
PREN 4832 : DRAFT 2017
|
AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
|
DSCC 93012 : B
|
CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 280 CONTACT, 2 POWER POSITIONS |
|
PREN 6094 : 200P2
|
AEROSPACE SERIES - WASHER, SPRING, COUNTERSUNK |
|
PREN 6090 : 200P1
|
AEROSPACE SERIES - WASHER, RETAINING |
|
SAE ARP 994 : 2016
|
DESIGN OF TUBING INSTALLATIONS FOR AEROSPACE HYDRAULIC SYSTEMS |
|
PREN 6093 : 200P1
|
AEROSPACE SERIES - RECEPTACLE, FLOATING, SINGLE LUG |
|
SAE AS 6116 : 2016
|
ALUMINUM FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPERABLE, FLUID SYSTEM, UP TO 1500 PSI (10340 KPA) MAXIMUM, SPECIFICATION FOR |
|
SAE AS 45909 : 2015
|
STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR |
|
SAE AS 7474 : 2018
|
BOLTS AND SCREWS, STEEL, CORROSION RESISTANT, UNS S17400 TENSILE STRENGTH 140 KSI PROCUREMENT SPECIFICATION |
|
SAE AS 4623 : 2016
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3,000 PSI, 275 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS |
|
DSCC 84191 : K
|
EXTRACTOR, ELECTRICAL CARD, METAL |
|
NASM 21083 : 2004
|
NUT, SELF-LOCKING, HEXAGON, NON-METALLIC INSERT, LOW HEIGHT, 250 DEGREES F |
|
SAE AS 81820 : 2014
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION |
|
SAE AS 18280 : 2017
|
FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI |
|
SAE AS 4108 : 2018
|
T-BOLT AND EYE BOLT, A286 CRES, 1000 DEGREES F FATIGUE RATED |
|
16/30340711 DC : 0
|
BS EN 16602-70-14 - SPACE PRODUCT ASSURANCE - CORROSION |
|
SAE AS 18280/2 : 2006
|
SLEEVE, INTERNALLY OR EXTERNALLY SWAGED OR WELDED, 24 DEGREE CONE FLARELESS FITTING, 3000 PSI |
|
BS EN 6105 : 2016
|
AEROSPACE SERIES - STUD WITH SHOULDER |
|
SAE AS 95234A : 2020
|
CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR |
|
MIL-DTL-83513 Revision G:2008
|
CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR |
|
MIL-DTL-83513-5 Revision H:2007
|
CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, MOUNTING HARDWARE |
|
MIL-DTL-27272 Revision D:2015
|
FITTINGS, POLYTETRAFLUOROETHYLENE HOSE, HIGH-TEMPERATURE, MEDIUM-PRESSURE, GENERAL SPECIFICATION FOR |
|
DEFSTAN 03-2/6(2011) : 2011
|
CLEANING AND PREPARATION OF METAL SURFACES |
|
MIL-DTL-45952 Revision A:2014
|
PIN, QUICK-RELEASE, DETENT GENERAL SPECIFICATION FOR |
|
MIL-DTL-13791-22 Revision A:2016
|
MACHINE-PAN HEAD SCREW, CROSS-RECESSED, CARBON STEEL, PROPER PROTECTED COATING PLATED, UNC-2A |
|
MIL-DTL-28748 Revision D:2001
|
CONNECTOR, PLUG AND RECEPTACLE, RECTANGULAR, RACK AND PANEL SOLDER TYPE AND CRIMP TYPE CONTACTS - GENERAL SPECIFICATION FOR |
|
MIL-DTL-781 Revision J:2014
|
TERMINAL, WIRE ROPE SWAGING, GENERAL SPECIFICATION FOR |
|
OO-K-220 Revision C:2015
|
KEY, MACHINE |
|
MIL-DTL-22263 Revision C:2009
|
COUPLING FUEL LINE, FLEXIBLE, 125 PSI, GENERAL SPECIFICATION FOR |
|
MIL-DTL-25579 Revision H:2014
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
|
A-A-59590 Revision D:2014
|
HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 3 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR |
|
A A 59789 : B
|
HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR |
|
MIL-DTL-55302-92 Revision F:2010
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, STRAIGHT-THRU, HERMAPHRODITIC CONTACTS (.100 INCH SPACING) |
|
MIL-DTL-32460-8 Base Document:2013
|
FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
|
14/30310866 DC : 0
|
BS EN 4836 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER- FLARED END - WITH EXTRA FINE THREAD PITCH - INCH SERIES |
|
MS 27082 : E
|
ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 90 DEGREES |
|
MIL-DTL-28840-25 Revision D:2013
|
CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 90 DEGREES, METAL CONDUIT FOR EMI SHIELDING |
|
MIL DTL 83513/29 : B
|
CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, PIN CONTACTS, 3 ROW, SOLDER TYPE, STANDARD PROFILE, 51 CONTACTS, PRINTED CIRCUIT BOARD |
|
MIL-DTL-24308-26 Revision M:2015
|
CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, SCREW-LOCK ASSEMBLY, FEMALE |
|
MIL-DTL-28840-30 Revision D:2013
|
CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, METAL CONDUIT COUPLING |
|
AN841 Revision 7:2013
|
ADAPTER - HOSE TO FLARED TUBE |
|
SAE AMS 5366 : 2012
|
STEEL, CORROSION AND HEAT RESISTANT, INVESTMENT CASTING 25CR - 20NI (CK-20) AS-CAST |
|
MIL DTL 32464/7 : 0
|
MALE ADAPTER, 45 DEGREES ELBOW, BULKHEAD, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
MS39207 Revision H:2018
|
ELBOWS, TUBE - SAFETY SLEEVE COMPRESSION TYPE, 90 DEGREE |
|
MIL-DTL-55302-164 Revision D:2004
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG AND/OR RECEPTACLE, 160 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC |
|
10/30227763 DC : 0
|
BS EN 6114 - AEROSPACE SERIES - BOLT, COUNTERSUNK HEAD, SHORT THREAD - INCH SERIES |
|
SAE AS 4875 : 2016
|
FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION |
|
MIL-DTL-83513-25 Revision D:2009
|
CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, SOCKET CONTACTS, 2 ROW, SOLDER TYPE, 9 THROUGH 37 CONTACTS, PRINTED CIRCUIT BOARD |
|
MIL DTL 32464/2 : 0
|
MALE ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
SAE AS 81934 : 2016
|
BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING |
|
MIL-DTL-55302-159 Revision D:2004
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE, 17, 29, 33, 41, 53, AND 65 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC |
|
MIL-DTL-25427 Revision B:2009
|
COUPLING ASSEMBLY, HYDRAULIC, SELF SEALING, QUICK DISCONNECT, GENERAL SPECIFICATION FOR |
|
MIL-DTL-83513-22 Revision D:2009
|
CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, PIN CONTACTS, 2 ROW, SOLDER TYPE, 9 THROUGH 37 CONTACTS, PRINTED CIRCUIT BOARD |
|
SAE ARP 5796 : 2013
|
FLIGHT CRITICAL CONTROL VALVES, MILITARY AIRCRAFT |
|
MIL-DTL-28840-23 Revision D:2013
|
CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, GLAND NUT, WIRING |
|
MIL-DTL-83513-17 Revision D:2009
|
CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, PIN CONTACTS, 3 ROW, SOLDER TYPE, STANDARD PROFILE, 51 CONTACTS, PRINTED CIRCUIT BOARD |
|
MIL DTL 32464/4 : 0
|
MALE ADAPTER, TEE, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 37 DEGREES SPHERICAL ON BRANCH, 1500-3000 PSI |
|
MIL-DTL-21097 Revision H:2017
|
CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD, GENERAL PURPOSE GENERAL SPECIFICATION FOR |
|
MIL-DTL-83513-19 Revision D:2009
|
CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, SOCKET CONTACTS, 2 ROW, SOLDER TYPE, STANDARD PROFILE, 9 THROUGH 37 CONTACTS, PRINTED CIRCUIT BOARD |
|
MIL-DTL-55302-55 Revision G:2004
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
|
MIL-DTL-83513-21 Revision D:2009
|
CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, SOCKET CONTACTS, 4 ROW, SOLDER TYPE, STANDARD PROFILE, 100 CONTACTS, PRINTED CIRCUIT BOARD |
|
MIL-DTL-83513-24 Revision D:2009
|
CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, PIN CONTACTS, 4 ROW, SOLDER TYPE, 100 CONTACTS, PRINTED CIRCUIT BOARD |
|
MS 27072 : F
|
WIRE, RETAINER |
|
A A 59950 : 0
|
HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 7 BODY, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR |
|
MIL DTL 83798/5 : E
|
FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARELESS, SWIVEL NUT, 45 DEGREES |
|
MIL-DTL-83513-11 Revision D:2009
|
CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, PIN CONTACTS, 3 ROW, SOLDER TYPE, NARROW PROFILE, 51 CONTACTS, PRINTED CIRCUIT BOARD |
|
MIL DTL 83296 : B
|
FITTINGS, CORROSION RESISTANT STEEL, HIGH TEMPERATURE, HIGH PRESSURE (3000 PSI), HYDRAULIC AND PNEUMATIC, GENERAL SPECIFICATION FOR |
|
MIL-DTL-55302-31 Revision L:2007
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: KEYING ACCESSORIES |
|
MIL DTL 83298 : C
|
HOSE, CONDUCTIVE POLYTETRAFLUOROETHYLENE TUBE, HIGH TEMPERATURE, HIGH PRESSURE (3000 PSI), HYDRAULIC AND PNEUMATIC |
|
MIL-DTL-83513-18 Revision D:2009
|
CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, PIN CONTACTS, 4 ROW, SOLDER TYPE, STANDARD PROFILE, 100 CONTACTS, PRINTED CIRCUIT BOARD |
|
MIL DTL 32464/8 : 0
|
MALE ADAPTER, 90 DEGREES ELBOW, BULKHEAD, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
MIL-DTL-39030-5 Revision C:2003
|
DUMMY LOADS, ELECTRICAL, COAXIAL, TYPE 4 (TNC), LOW POWER |
|
MIL-DTL-39030-3 Revision E:2013
|
DUMMY LOADS, ELECTRICAL, COAXIAL, TYPE 1 (SMA), LOW POWER |
|
AN844 Revision 13:2013
|
ELBOW - PIPE TO HOSE, 45 DEGREES |
|
MS 18194 : E
|
JACKSCREWS, ELECTRICAL CONNECTORS MALE AND FEMALE, LONG, TURNABLE |
|
MIL-DTL-13220/2B:2015
|
HOOK, SLIP, CLEVIS, WITH LATCH |
|
MIL-DTL-83513-23 Revision D:2009
|
CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, PIN CONTACTS, 3 ROW, SOLDER TYPE, 51 CONTACTS, PRINTED CIRCUIT BOARD |
|
NASM39086:1999
|
PIN, SPRING, TUBULAR, COILED, HEAVY DUTY |
|
MIL PRF 39012/55 : H
|
CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SMA (CABLED) - PLUG, PIN CONTACT, CLASS 2) |
|
AN 807 : 0007
|
ADAPTER, STRAIGHT, TUBE TO HOSE |
|
MIL-DTL-83513-26 Revision D:2009
|
CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, SOCKET CONTACTS, 3 ROW, SOLDER TYPE, 51 CONTACTS, PRINTED CIRCUIT BOARD |
|
MIL-DTL-6001 Revision B:2013
|
FITTINGS; AIRCRAFT, SOLDER TYPE, TUBE |
|
MS 9194 : C
|
ELBOW, TUBE - SAE-AMS5646, BOSS, 90 DEGREES |
|
MIL-DTL-55302-57 Revision H:2004
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
|
MIL DTL 52525/13 : C
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE STRAIGHT |
|
MIL-DTL-32464 Revision A:2017
|
FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR |
|
MIL DTL 32464/10 : 0
|
MALE ADAPTER, LONG, NIPPLE TUBE, HYDRAULIC AND PNEUMATIC TUBE, LONG HEX, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
MIL-DTL-83513-10 Revision D:2008
|
CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, PIN CONTACTS, 2 ROW, SOLDER TYPE, NARROW PROFILE, 9 THROUGH 37 CONTACTS, PRINTED CIRCUIT BOARD |
|
MIL DTL 32371 : 0
|
FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, SPHERICAL TO ORFS CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR |
|
PREN 6092 : 200P2
|
AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG |
|
PREN 6089 : 200P2
|
AEROSPACE SERIES - WASHER, RETAINING, FOR USAGE WITH STUD EN 6088 |
|
MIL-DTL-28754 Revision E:2016
|
CONNECTORS, ELECTRICAL, MODULAR, AND COMPONENT PARTS GENERAL SPECIFICATION FOR |
|
MIL-DTL-32460-7 Base Document:2013
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
|
MIL-DTL-32460-5 Base Document:2013
|
FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
|
SAE AS 85052 : 2015
|
CLAMP ASSEMBLY, LOOP TYPE, CUSHIONED, GENERAL SPECIFICATION FOR |
|
MIL DTL 32464/5 : 0
|
MALE ADAPTER, NIPPLE TUBE, HYDRAULIC AND PNEUMATIC, REGULAR HEX, 37 DEGREES SPHERICAL TO NPTF, 1500-3000 PSI |
|
SAE AS 620 : 2012
|
HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT |
|
I.S. EN 6105:2016
|
AEROSPACE SERIES - STUD WITH SHOULDER |
|
SAE AS 5958 : 2017
|
FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPARABLE, FLUID SYSTEM FOR OPERATING PRESSURES UP TO AND INCLUDING 5080 PSI (35 000 KPA), SPECIFICATION FOR |
|
SAE AS 39901 : 2012
|
BEARINGS, ROLLER, NEEDLE, AIRFRAME, ANTIFRICTION, INCH |
|
I.S. EN 6090:2016
|
AEROSPACE SERIES - WASHER, RETAINING |
|
SAE AMS 5347 : 2014
|
STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB (NB) - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H1000), 150 KSI (1034 MPA) TENSILE STRENGTH (15-5) |
|
SAE AS 1975 : 2016
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3000/4000 PSI, 275 DEGREES F, STANDARD DUTY, HYDRAULIC, AIRCRAFT SYSTEMS |
|
SAE AMS 5356 : 2016
|
STEEL, CORROSION RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H1100), 130 KSI (896 MPA) TENSILE STRENGTH |
|
SAE AMS 5342 : 2014
|
STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 16CR - 4.1NI - 0.28CB (NB) - 3.2CU, HOMOGENIZATION, SOLUTION, AND PRECIPITATION HEAT TREATED (H1100), 130 KSI (896 MPA) TENSILE STRENGTH (17-4) |
|
SAE AS 1701 : 2017
|
LUBRICANT, SOLID FILM |
|
SAE AS 85449 : 2015
|
CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, GENERAL SPECIFICATION FOR |
|
MIL-DTL-45932 Revision A:2015
|
INSERT, SCREW THREAD, THIN WALL, LOCKED IN: GENERAL SPECIFICATION FOR |
|
SAE AS 82819 : 2013
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 300 CPM OSCILLATION (13 FPM), -65 TO +160 DEGREES F (-54 TO +71 DEGREES C), LINERS LESS THAN 0.015 INCHES |
|
MIL-DTL-13444 Revision H:2006
|
HOSE AND HOSE ASSEMBLIES, RUBBER: FUEL AND OIL |
|
MIL-DTL-26633 Revision F:2014
|
HOSE ASSEMBLY, NONCONDUCTIVE, POLYTETRAFLUOROETHYLENE, OXYGEN |
|
MIL-DTL-55302-7 Revision E:2006
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING) |
|
MIL-DTL-52525-5 Revision D:2011
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT |
|
MIL DTL 52525/34 : B
|
FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT |
|
MIL DTL 52525/2 : C
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE |
|
MIL-DTL-18866 Revision J:2015
|
FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, GENERAL SPECIFICATION FOR |
|
MS39202 Revision G:2012
|
ELBOWS, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, 90 DEGREE, MALE PIPE END |
|
MS39201 Revision G:2012
|
NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE |
|
MS 27075 : D
|
NIPPLE, FLARED, TUBE TO HOSE - SWIVEL NUT |
|
MS 27071 : D
|
UNION, NIPPLE |
|
MS27625D : 2018
|
WIRE, RETAINER |
|
SAE AS 18280/1 : 2017
|
SLEEVE, BITE TYPE, 24 DEGREE CONE FLARELESS FITTING, 3000 PSI |
|
MS 27070 : E
|
SLEEVE, HOSE COUPLING |
|
MIL-DTL-19068 Revision B:2006
|
VALVES, SHUTTLE, HYDRAULIC, AIRCRAFT, TYPE 2 SYSTEMS |
|
MS20762 Revision D:2016
|
ELBOW, FLARED TUBE, FLANGED, SWIVEL, 90 DEGREES |
|
MIL-DTL-32460-1 Base Document:2013
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
|
DSCC 93006 : B
|
CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 296 CONTACT, 2 POWER POSITIONS |
|
MIL-DTL-55181-4 Revision D:2008
|
CONNECTOR, RECEPTACLE, ELECTRICAL, PANEL MOUNT, WATERPROOF, 4 SOCKET CONTACTS, 35 AMP |
|
MS 18195 : C
|
JACKSCREWS, ELECTRICAL CONNECTORS MALE AND FEMALE, SHORT TURNABLE |
|
MIL PRF 55339 : C
|
ADAPTERS, CONNECTORS, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES AND WITHIN SERIES), GENERAL SPECIFICATION FOR |
|
MIL-DTL-55302-89 Revision E:2006
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, RIGHT ANGLE, HERMAPHRODITIC CONTACTS (.100 SPACING) |
|
AN 842 : 0013
|
ELBOW - PIPE TO HOSE, 90 DEGREES |
|
MS39324 Revision C:2017
|
ADAPTER, 37 DEGREE, FLARE TO 'O' RING BOSS, 45 DEGREE FLARE |
|
MIL-DTL-55302-182 Revision C:2008
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: GUIDE PINS, JACKSCREWS AND MOUNTING EARS |
|
MIL DTL 32234 : 0
|
CONNECTORS, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, BLADE AND FORK, EIGHT ROW, GENERAL SPECIFICATION FOR |
|
MIL DTL 38999/28 : H
|
CONNECTORS, ELECTRICAL, CIRCULAR, NUT, HEXAGON, CONNECTOR MOUNTING, SERIES 3 AND 4, METRIC |
|
MIL DTL 83513/31 : B
|
CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATUREE, POLARIZED SHELL, STRAIGHT, SOCKET CONTACTS, 2 ROW, SOLDER TYPE, STANDARD PROFILE, 9 THROUGH 37 CONTACTS, PRINTED CIRCUIT BOARD |
|
MIL-DTL-55302-162 Revision D:2004
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG, 17, 29, 33, 41, 53, AND 65 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC |
|
MS51842 Revision E:2017
|
ELBOW, TUBE TO BOSS 45 DEGREE, O-RING, FLARELESS TYPE, HYDRAULIC |
|
MS 18205 : C
|
PIN, STRAIGHT HEADED |
|
BS EN 6090 : 2016
|
AEROSPACE SERIES - WASHER, RETAINING |
|
DSCC 93004 : B
|
CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 300 CONTACT, 8 FIBER OPTIC POSITIONS |
|
10/30227764 DC : 0
|
BS EN 6115 - AEROSPACE SERIES - BOLT - PROTRUDING HEAD, SHORT THREAD - INCH SERIES |
|
DSCC 93013 : B
|
CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 280 CONTACT, 2 POWER POSITIONS, WITH SAFETY GROUND |
|
SAE AMS 5344 : 2013
|
STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 16CR - 4.1NI - 0.28CB - 3.2CU, HOMOGENIZATION, SOLUTION, AND PRECIPITATION HEAT TREATED (H900), 180 KSI (1241 MPA) TENSILE STRENGTH (17-4) |
|
MIL-DTL-32460-6 Base Document:2013
|
FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
|
MIL-DTL-32460 Revision A:2017
|
ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR |
|
MIL-DTL-83796-1 Revision C:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE |
|
MIL DTL 83798 : D
|
FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
|
MIL-DTL-8795 Revision G:2014
|
HOSE ASSEMBLIES, ELASTOMERIC, HYDRAULIC, FUEL, AND OIL RESISTANT, GENERAL SPECIFICATION FOR |
|
MIL-DTL-55302-96 Revision F:2008
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, WRAPPOST (REMOVABLE) HERMAPHRODITIC CONTACTS (.100 INCH SPACING) |
|
A A 55563 : D
|
HOLDER, ELECTRICAL CARD, METAL CARD GUIDE, GENERAL REQUIREMENTS FOR |
|
MIL DTL 52525/38 : B
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE |
|
SAE AS 4459 : 2013
|
FITTINGS, TUBE, FLUID SYSTEM 3000 PSIG (21000 KPA) RATED PRESSURE, EXTERNALLY SWAGED, SPECIFICATION FOR |
|
MIL-DTL-83513-16 Revision D:2009
|
CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, PIN CONTACTS, 2 ROW, SOLDER TYPE, STANDARD PROFILE, 9 THROUGH 37 CONTACTS, PRINTED CIRCUIT BOARD |
|
MIL-DTL-5675 Revision C:2005
|
SHACKLE: CABLE, AIRCRAFT |
|
MIL-DTL-28840-15 Revision E:2013
|
CONNECTORS, ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, PROTECTIVE COVER, PLUG |
|
MIL-DTL-55302-160 Revision D:2004
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE, 72, 84, 96, AND 120 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC |
|
MS51522 Revision C:2017
|
ELBOW, TUBE, 45 DEGREE SWIVEL, 37 DEGREE FLARED |
|
MIL DTL 83796/13 : 0
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS, WITH LOCKWIRE HOLE |
|
MS51512 Revision D:2017
|
TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, 37 DEGREE FLARED |
|
MIL-DTL-52525-3 Revision D:2011
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, SHORT DROP |
|
MIL DTL 85052/12 : 0
|
CLAMP, LOOP, STAINLESS STEEL, 400 DEGREES F, FLUOROSILICONE |
|
MS51531 Revision B:1985
|
NUT, TUBE COUPLING, 37 DEGREE FLARED |
|
MS39322 Revision B:2017
|
ADAPTER: 37 DEGREE FLARE, FEMALE SWIVEL TO WELD SOCKET, 3/4 INCH TO 1 INCH |
|
MIL-DTL-55116 Revision D:2013
|
CONNECTORS: MINIATURE AUDIO, FIVE-PIN AND SIX-PIN - GENERAL SPECIFICATION FOR |
|
MIL DTL 32464/11 : 0
|
MALE ADAPTER, BULKHEAD, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
14/30310862 DC : 0
|
BS EN 4832 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
|
MIL PRF 39012/79 : G
|
CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMA (CABLED) PIN CONTACT, CLASS 2, SEMIRIGID CABLE |
|
MIL-DTL-27235 Revision B:2014
|
PIN, STRAIGHT, HEADED (CLEVIS PINS) |
|
SAE AMS 03-2 : 2017
|
CLEANING AND PREPARATION OF METAL SURFACES |
|
MIL-DTL-55302-4 Revision F:2008
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING) |
|
MIL-DTL-83513-14 Revision D:2009
|
CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, SOCKET CONTACTS, 3 ROW, SOLDER TYPE, NARROW PROFILE, 51 CONTACTS, PRINTED CIRCUIT BOARD |
|
MS 9769 : B
|
REDUCER, TUBE - STRAIGHT, TUBE TO BOSS |
|
MIL-DTL-55302-56 Revision H:2004
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
|
MIL DTL 85052/11 : 0
|
CLAMP, LOOP, STAINLESS STEEL, 275 DEGREES F, SIDE LOCK, ETHYLENE PROPYLENE |
|
MS51533 Revision A:1979
|
SLEEVE, COMPRESSION, TUBE FITTING, 37 DEGREE FLARED |
|
MS51526 Revision A:1979
|
ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED (LONG) |
|
MIL-DTL-55302-192 Revision A:2006
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, 122 AND 152 POSITIONS, PRINTED WIRING BOARD (.075 SPACING) |
|
MIL DTL 24308/25 : K
|
CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, SCREW-LOCK ASSEMBLY, MALE |
|
MS 9195 : B
|
ELBOW, TUBE - SAE-AMS5639, BOSS, 45 DEGREES |
|
MIL-DTL-55302-66 Revision G:2004
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
|
MIL-DTL-28840-8 Revision F:2013
|
CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 90 DEGREES, CABLE SEALING AND SHIELD TERMINATION |
|
MIL-DTL-12883-50 Revision B:2003
|
SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, BRACKETS AND SOCKET ASSEMBLY FOR RELAYS, 2-POLE, 10 AMPERES (MIL-PRF-6106 AND MIL-PRF-83536) |
|
MS51530 Revision B:1988
|
FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON RUN, O-RING, 37 DEGREE FLARED |
|
MS 20756 : F
|
FLANGE, SWIVEL, RETAINING |
|
MIL DTL 39030/23 : 0
|
DUMMY LOAD, ELECTRICAL, COAXIAL, TYPE 1 (SMK), DC-32.0 GHZ |
|
MIL-DTL-13220/5B:2015
|
HOOK, SLIP, EYE, WITH LATCH |
|
MIL DTL 32372/11 : A
|
FITTING, ADAPTER, TEE, HYDRAULIC AND PNEUMATIC, NPTF MALE ON BRANCH TO ORFS MALE TO FEMALE RUN TO RUN |
|
MIL-DTL-55181-6 Revision D:2008
|
CONNECTOR, RECEPTACLE, ELECTRICAL, WATERPROOF, 9 SOCKET CONTACTS, SOLDER CUP, 7.5 AMP |
|
MS 18197 : G
|
GUIDE PIN, ELECTRICAL CONNECTOR MALE AND FEMALE |
|
MIL-DTL-52525-9 Revision C:2008
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT |
|
MIL-DTL-83796-3 Revision C:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS |
|
AN 914 : 0011
|
ELBOW, PIPE, INTERNAL AND EXTERNAL THREAD, 90 DEGREES |
|
SAE AMS 5343 : 2014
|
STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 16CR - 4.1NI - 0.28CB (NB) - 3.2CU, HOMOGENIZATION, SOLUTION, AND PRECIPITATION HEAT TREATED (H1000), 150 KSI (1034 MPA) TENSILE STRENGTH (17-4) |
|
MS 20761 : C
|
ELBOW, FLARED TUBE, FLANGED, SWIVEL, 45 DEGREES |
|
DSCC 93011 : B
|
CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 284 CONTACT, 8 FIBER OPTIC AND SAFETY GROUND |
|
SAE AS 4842 : 2016
|
FITTINGS AND BOSSES, PIPE THREADED, FLUID CONNECTION |
|
SAE AS 22227 : 2014(S2018)
|
BEARING, BALL, ANNULAR, GENERATOR AND MOTOR GENERATOR |
|
SAE AMS 5400 : 2014
|
STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H935), 170 KSI (1172 MPA) TENSILE STRENGTH |
|
SAE AS 6450 : 2012(S2019)
|
LUBRICANT APPLICATION, SOLID FILM, HEAT CURED, POTABLE WATER, HYDRAULIC, AND OTHER FLUID SYSTEMS |
|
SAE MA 3377 : 2018
|
BOLTS AND SCREWS, NICKEL ALLOY UNS N07718, TENSILE STRENGTH 1275 MPA PROCUREMENT SPECIFICATION, METRIC |
|
I.S. EN 6092:2016
|
AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG |
|
PREN 16602-70-14 : DRAFT 2016
|
SPACE PRODUCT ASSURANCE - CORROSION |
|
NASA KSC C 123 : 2009
|
SURFACE CLEANLINESS OF GROUND SUPPORT EQUIPMENT FLUID SYSTEMS, SPECIFICATION FOR |
|
MIL-DTL-13791 Revision H:2015
|
DISTRIBUTOR, IGNITION SYSTEM: INTEGRAL COIL, WATERPROOF 24 VOLT |
|
NASA STD 6012 : 2012
|
CORROSION PROTECTION FOR SPACE FLIGHT HARDWARE |
|
MIL-DTL-52525-17 Revision C:2008
|
FITTINGS, CLAMP-HALVES, FLANGE TO PORT, FOR 4-BOLT SPLIT-FLANGE |
|
NASA MSFC HDBK 3697 : 2014
|
ELECTRICAL BONDING DESIGN GUIDE HANDBOOK |
|
MIL DTL 52525/31 : B
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL |
|
MIL-DTL-55302 Revision G:2009
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES |
|
A A 59832 : B
|
EXTRACTOR, ELECTRICAL CARD, METAL, GENERAL REQUIREMENTS FOR |
|
MS 18173 : B
|
WASHER, FLAT |
|
MIL-DTL-21248 Revision D:2015
|
RING, RETAINING (TAPERED AND REDUCED SECTION TYPE) |
|
MIL DTL 52525 : F
|
FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR |
|
MS 9196 : C
|
TEE, TUBE - SAE-AMS5646, BOSS |
|
MIL-DTL-32480-2 Base Document:2014
|
FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, FLARELESS MALE TO ORFS MALE |
|
MIL DTL 32434 : 0
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CONVOLUTED, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
|
MS 27391 : F
|
NIPPLE, FLARELESS, TUBE TO HOSE - SWIVEL NUT |
|
MIL-DTL-55302-124 Revision A:2006
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: KEYING ACCESSORIES |
|
MIL-DTL-28754-41 Revision C:2015
|
CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR ASSEMBLY, SCREW, INSERT |
|
MIL-DTL-12883-53 Revision B:2003
|
SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, MOUNTING TRACK, FOR RELAY SOCKETS AND ELECTROMAGNETIC RELAYS |
|
MIL-DTL-28840-3 Revision F:2013
|
CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, 45 DEGREES, OPEN, FOR ELECTRICAL CONNECTORS |
|
MIL-DTL-55074 Revision G:2013
|
CONNECTORS, PLUG AND RECEPTACLE, TELEPHONE, ELECTRICAL, SUBASSEMBLY AND ACCESSORIES AND CONTACT ASSEMBLY, ELECTRICAL, GENERAL SPECIFICATION FOR |
|
MIL-DTL-24308 Revision G:2009
|
CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR |
|
MIL-DTL-83513-12 Revision D:2009
|
CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, PIN CONTACTS, 4 ROW, SOLDER TYPE, NARROW PROFILE, 100 CONTACTS, PRINTED CIRCUIT BOARD |
|
MIL-DTL-83413-7 Revision F:2015
|
CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: GROUNDING CLAMP CONNECTOR FOR TYPES 1 AND 3 GROUNDING ASSEMBLIES, ALUMINUM CLIP, ELECTRICAL |
|
MIL-DTL-32480-8 Base Document:2014
|
FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, FLARELESS, MALE TO ORFS, FEMALE SWIVEL |
|
MIL PRF 49142 : B
|
CONNECTOR, TRIAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
|
MIL-DTL-32460-4 Base Document:2013
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
|
MIL-DTL-83413-4 Revision E:2014
|
CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: PLUGS, FOR TYPES 1 AND 2 GROUNDING ASSEMBLIES |
|
MIL DTL 28754/17 : E
|
CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR ASSEMBLY, TYPE 5, STYLE 1, CONTACT TAILS ON .100 CENTERS |
|
MIL DTL 32372/5 : A
|
FITTING, ADAPTER, 45 DEGREE, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS BULKHEAD |
|
MIL-DTL-85069 Revision D:2012
|
SLEEVES AND GROMMETS, FASTENER |
|
MIL DTL 32464/3 : 0
|
MALE ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
MIL DTL 32372/10 : A
|
FITTING, ADAPTER, TEE, HYDRAULIC AND PNEUMATIC, NPTF MALE ON BRANCH TO ORFS FEMALE RUN TO RUN |
|
MIL-DTL-28840-1 Revision F:2013
|
CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, STRAIGHT, OPEN, FOR ELECTRICAL CONNECTORS |
|
BS EN 6094 : 2016
|
AEROSPACE SERIES - WASHER, SPRING, COUNTERSUNK |
|
MIL-DTL-13220/1B:2015
|
HOOK, SLIP, CLEVIS |
|
MIL-DTL-55181-2 Revision D:2008
|
CONNECTOR, RECEPTACLE, ELECTRICAL, PANEL MOUNT, WATERPROOF, 4 PIN CONTACTS, SOLDER TURRET, 35 AMP |
|
MS 18196 : G
|
JACKSCREW, ELECTRICAL CONNECTOR, MALE AND FEMALE, FIXED |
|
16/30354035 DC : 0
|
BS EN 4854-2 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, WIDE SERIES - DIMENSIONS AND LOADS |
|
MIL-DTL-83517 Revision B:2015
|
CONNECTOR, COAXIAL, RADIO FREQUENCY FOR COAXIAL, STRIP OR MICROSTRIP TRANSMISSION LINE, GENERAL SPECIFICATION FOR |
|
MIL STD 171 : F
|
FINISHING OF METAL AND WOOD SURFACES |
|
MIL DTL 5070 : F
|
ADAPTER, HOSE TO TUBE, PIPE AND FLANGE, REUSABLE - HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR |
|
MIL-DTL-83522 Revision E:2013
|
CONNECTORS, FIBER OPTIC, SINGLE FERRULE, GENERAL SPECIFICATION FOR |
|
MIL-DTL-32480-3 Base Document:2014
|
FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, FLARELESS MALE TO ORFS MALE |
|
MIL-DTL-52471-8 Revision B:2008
|
HOSE ASSEMBLIES, RUBBER: HYDRAULIC PRESSURE-TYPE; TYPE 100RE |
|
MIL-DTL-8789 Revision G:2015
|
FITTING END, ATTACHABLE, HYDRAULIC, HIGH PRESSURE (3,000 PSI), GENERAL SPECIFICATION FOR |
|
DSCC 93009 : B
|
CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 356 CONTACT, WITH SAFETY GROUND |
|
MIL DTL 13220/4B:2015
|
HOOK, SLIP, SWIVEL EYE, WITH LATCH |
|
MIL-DTL-32460-9 Base Document:2013
|
FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
|
MIL-DTL-26666 Revision G:2006
|
HOSE ASSEMBLY, PNEUMATIC, HIGH PRESSURE |
|
AN 848 : 0013
|
ELBOW, HOSE, 90 DEGREES |
|
MIL DTL 85052/15 : 0
|
CLAMP, LOOP, STAINLESS STEEL, 550 DEGREES F, POLY-TETRAFLUOROETHYLENE (PTFE) |
|
MIL-DTL-83513-15 Revision E:2009
|
CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, SOCKETS CONTACTS, 4 ROW, SOLDER TYPE, NARROW PROFILE, 100 CONTACTS, PRINTED CIRCUIT BOARD |
|
AN 840 : 0011
|
ADAPTER, STRAIGHT, PIPE TO HOSE |
|
MIL DTL 32464/9 : 0
|
MALE ADAPTER, TEE, BULKHEAD, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 37 DEGREES SPHERICAL ON RUN, 1500-3000 PSI |
|
MIL-DTL-55302-60 Revision J:2004
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 90, 100 AND 120 CONTACT POSITIONS (.100 SPACING) |
|
MS51818 Revision E:1987
|
TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, FLARELESS TYPE, HYDRAULIC |
|
MIL-DTL-55302-191 Revision C:2011
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 100 POSITIONS, PRINTED WIRING BOARD (.075 SPACING) |
|
MIL-DTL-55302-65 Revision H:2004
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
|
AN 839 : 0009
|
ELBOW, TUBE TO HOSE, 45 DEGREES |
|
MIL-DTL-28840-2 Revision F:2013
|
CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, 90 DEGREES, OPEN, FOR ELECTRICAL CONNECTORS |
|
MIL DTL 32371/1 : 0
|
FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, STRAIGHT |
|
SAE AS 5000 : 2010
|
FITTING, PLUG-IN UNION, RING LOCKED, 24 DEGREE CONE, FLUID CONNECTION, 5080 PSI (35000 KPA), SPECIFICATION FOR |
|
MIL-DTL-52525-16 Revision D:2008
|
FITTINGS, CLAMP-HALVES, FOR 4-BOLT SPLIT-FLANGE, SAE-J518, TYPE SPLIT-FLANGE CLAMP (SFC) |
|
MS 27394 : C
|
ELBOW, FLARELESS, TUBE TO HOSE - 90 DEGREE SWIVEL NUT |
|
MIL-DTL-52471-2 Revision C:2008
|
HOSE ASSEMBLIES, RUBBER: HYDRAULIC PRESSURE-TYPE; TYPE 100R2, DOUBLE-WIRE BRAIDED REINFORCEMENT HOSE |
|
MIL DTL 52525/37 : B
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT |
|
MIL DTL 52471/3 : C
|
HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100RE, FOUR-WIRE BRAIDED REINFORCEMENT OR MULTIPLE WIRE BRAIDED STEEL WIRE REINFORCED HOSE |
|
MIL DTL 21617/29 : 0
|
CONNECTOR, RECEPTACLE ELECTRICAL, RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE, BACK SHELLS |
|
MS51841 Revision E:2017
|
TEE, TUBE TO BOSS, BOSS ON BENCH, O-RING, FLARELESS TYPE, HYDRAULIC |
|
SAE AMS 5368 : 2012
|
STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS 15CR - 4.0NI - 2.3MO - 0.09N SOLUTION HEAT TREATED |
|
SAE AS 85049 : 2016
|
CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR |
|
SAE AS 1339 : 2017
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC |
|
SAE AMS 5357 : 2017
|
STEEL, CORROSION RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB - 2.8CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
SAE AS 12500 : 2018
|
CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
|
SAE AMS 5352 : 2015
|
STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 17CR - 0.55MO (0.95 - 1.20C), ANNEALED |
|
FF-S-1362:2014
|
STUD, PLAIN, GENERAL PURPOSE |
|
EN 6094:2016
|
Aerospace series - Washer, spring, countersunk |
|
EN 6092:2016
|
Aerospace series - Receptacle, floating, double lug |
|
EN 6090:2016
|
Aerospace series - Washer, retaining |
|
EN 6105:2016
|
Aerospace series - Stud with shoulder |
|
DSCC 93010 : B
|
CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 284 CONTACT, 8 FIBER OPTIC AND SAFETY GROUND |
|
MS51517 Revision C:2017
|
CROSS, TUBE, 37 DEGREE FLARED |
|
MIL DTL 32372/1 : A
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS MALE |
|
MIL DTL 32371/8 : 0
|
FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, 90 DEGREES ELBOW, BULKHEAD |
|
MIL-DTL-55302-95 Revision E:2004
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, COMPOSITE WRAPPOST, HERMAPHRODITIC CONTACTS (.100 INCH SPACING) |
|
MIL-DTL-32480-9 Base Document:2014
|
FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, FLARELESS, MALE TO ORFS, FEMALE SWIVEL |
|
MIL DTL 32371/5 : 0
|
FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, UNION CROSS, SPHERICAL ON BRANCH |
|
MIL DTL 32371/7 : 0
|
FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, 45 DEGREES ELBOW, BULKHEAD |
|
MS51500 Revision F:2017
|
FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ADAPTER, STRAIGHT, PIPE TO TUBE, MALE END, 37 DEGREE FLARED |
|
MIL-DTL-28754-24 Revision C:2014
|
CONNECTORS, ELECTRICAL, MODULAR, PIN, KEYING |
|
MS51505 Revision C:2016
|
ELBOW, TUBE, 90 DEGREE, 37 DEGREE FLARED |
|
MIL STD 648 : E
|
SPECIALIZED SHIPPING CONTAINERS |
|
MIL-DTL-55302-64 Revision H:2004
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
|
MIL-DTL-55302-193 Revision B:2009
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 122 AND 152 POSITION, PRINTED WIRING BOARD (.075 SPACING) |
|
MIL-DTL-55302-59 Revision H:2004
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 90, 100 AND 120 CONTACT POSITIONS FOR PRINTED WIRING BOARDS (.100 SPACING) |
|
MIL DTL 83513/28 : B
|
CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, PIN CONTACTS, 2 ROW, SOLDER TYPE, STANDARD PROFILE, 9 THROUGH 37 CONTACTS, PRINTED CIRCUIT BOARD |
|
MS27612 Revision M:2013
|
ADAPTER, HYDRAULIC BLEEDER VALVE, AIRCRAFT WHEEL BRAKE |
|
MIL-DTL-32480-4 Base Document:2014
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, FLARELESS MALE TO ORFS BULKHEAD |
|
MIL-DTL-52525-45 Base Document:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE |
|
MS51513 Revision D:2017
|
TEE, PIPE TO TUBE, FEMALE PIPE ON BRANCH, 37 DEGREE FLARED |
|
MIL DTL 52525/8 : C
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, LONG DROP |
|
SAE AS 81914 : 2016
|
TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR |
|
MIL DTL 32371/2 : 0
|
FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, 45 DEGREES ELBOW |
|
MS51506 Revision E:2017
|
FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ELBOW, PIPE TO TUBE, 90 DEGREE, FEMALE PIPE END, 37 DEGREE FLARED |
|
MS51527 Revision D:2000
|
FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; ELBOW, TUBE TO BOSS, 90 DEGREE, O-RING, 37 DEGREE FLARED |
|
SAE AS 4843 : 2016
|
FITTINGS, BEADED, FLUID CONNECTION |
|
MIL-DTL-52525-39 Revision B:2008
|
FITTINGS, HOSE, SCREW-ON TO 37DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE |
|
MS51815 Revision F:1987
|
ELBOW PIPE TO TUBE 90 DEGREE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC |
|
MS39323 Revision C:2017
|
FITTING, TUBE, REDUCER: 37 DEGREE FLARE |
|
MS51523 Revision C:2017
|
TEE, TUBE TO SWIVEL, SWIVEL ON RUN, 37 DEGREE FLARED |
|
MIL-DTL-28840-5 Revision D:2013
|
CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, STRAIGHT, METAL CONDUIT FOR EMI SHIELDING |
|
SAE AMS 5350 : 2017
|
STEEL, CORROSION AND MODERATE HEAT-RESISTANT, INVESTMENT CASTINGS, 12.5CR (410), HARDENED AND TEMPERED |
|
MIL DTL 52525/14 : C
|
FITTINGS, HOSE CRIMP TYPE, SPLIT-FLANGE 45 DEGREES BENT |
|
MIL DTL 83796/12 : 0
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS |
|
MIL-DTL-21617 Revision B:2012
|
CONNECTORS, PLUG AND RECEPTACLE, ELECTRICAL, RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE, GENERAL SPECIFICATION FOR |
|
MS51511 Revision D:2017
|
TEE, PIPE TO TUBE, MALE PIPE ON RUN, 37 DEGREE FLARED |
|
MS51812 Revision F:1987
|
NIPPLE, TUBE, BULKHEAD, FLARELESS TYPE HYDRAULIC |
|
MS51515 Revision D:2017
|
TEE, TUBE, BULKHEAD ON BRANCH, 37 DEGREE FLARED |
|
MIL-DTL-52525-41 Revision A:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE |
|
MS51817 Revision E:1987
|
ELBOW, PIPE TO TUBE, 45 DEGREE MALE PIPE END, FLARELESS TYPE, HYDRAULIC |
|
MIL-DTL-52525-42 Revision B:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE 90 DEGREES BENT |
|
MS51820 Revision E:1987
|
ELBOW, TUBE, 90 DEGREE, FLARELESS TYPE, HYDRAULIC |
|
MS51518 Revision C:2017
|
PLUG, MACHINE THREAD, 37 DEGREE FLARED |
|
I.S. EN 6094:2016
|
AEROSPACE SERIES - WASHER, SPRING, COUNTERSUNK |
|
MS51813 Revision E:1987
|
ELBOW, PIPE TO TUBE 90 DEGREE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC |
|
MIL DTL 83798/2 : D
|
FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARED, SWIVEL NUT, 45 DEGREES |
|
MIL-DTL-52525-12 Revision D:2011
|
FITTINGS, HOSE, SCREW ON TO SPLIT-FLANGE 90 DEGREES BENT |
|
SAE AMS 5560 : 2016
|
STEEL, CORROSION RESISTANT, SEAMLESS TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED |
|
MIL DTL 85052/13 : 0
|
CLAMP, LOOP, STAINLESS STEEL, 212 DEGREES F, CHLOROPRENE |
|
MIL-DTL-28840-22 Revision C:2013
|
CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, METAL CONDUIT BUSHING |
|
SAE AMS 5360 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS, 17CR - 13NI - 1.9MO, SOLUTION HEAT TREATED |
|
MIL-DTL-32460-2 Base Document:2013
|
FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
|
MIL-DTL-52525-33 Revision A:2008
|
FITTINGS, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPRIAL-WRAP REINFORCEMENT HOSE |
|
MIL PRF 39012/80 : F
|
CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMA (CABLED) PIN CONTACT, RIGHT ANGLE, CLASS 2, SEMIRIGID CABLE |
|
MIL-DTL-13719 Revision G:2012
|
HOSE AND HOSE ASSEMBLY, RUBBER, HYDRAULIC BRAKE, TYPE 1 AND TYPE 2 |
|
MIL-DTL-55302-58 Revision J:2004
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
|
MIL-DTL-21338 Revision B:2014
|
WASHER, KEY RETAINING, BALL AND ROLLER BEARINGS |
|
DSCC 93003 : C
|
CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 372 CONTACT POSITIONS |
|
SAE AS 95234 : 2014
|
CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR |
|
MS39212K : 2018
|
SLEEVES, COMPRESSION, TUBE - HOSE FITTING - SAFETY SLEEVE TYPE |
|
MIL-DTL-52525-4 Revision D:2011
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, LONG DROP |
|
MS51503 Revision C:2016
|
ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, 37 DEGREE FLARED |
|
MS51514 Revision D:2017
|
TEE, PIPE TO TUBE, FEMALE PIPE ON RUN 37 DEGREE FLARED |
|
MIL DTL 83798/6 : D
|
FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARELESS, SWIVEL NUT, 90 DEGREES |
|
MIL DTL 25677 : G
|
ADAPTER, CAP, AND NOZZLE, PRESSURE LUBRICATING OIL SERVICING, AIRCRAFT, GENERAL SPECIFICATION FOR |
|
MIL PRF 39012/56 : G
|
CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SMA (CABLED) - PLUG, PIN CONTACT, RIGHT ANGLE, CLASS 2) |
|
MS 27613 : G
|
CONNECTORS, ELECTRICAL, RECEPTACLE, PANEL MOUNT, FIREWALL SERIES |
|
MIL DTL 85052/16 : 0
|
CLAMP, LOOP, STAINLESS STEEL, 275 DEGREES F, NITRILE BUTADIENE RUBBER FUEL AND PETROLEUM BASED HYDRAULIC FLUID RESISTANT |
|
MIL DTL 32372/3 : A
|
FITTING, ADAPTER, 90 DEGREE ELBOW, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS MALE |
|
MS51504 Revision C:2016
|
ELBOW, PIPE TO TUBE, 90 DEGREE MALE PIPE END, 37 DEGREE FLARED |
|
A A 59553 : A
|
COUPLING HALVES, CAP AND WYE; QUICK DISCONNECT PNEUMATIC HOSE, TWO-LUG UNIVERSAL TYPE |
|
MS 27069 : H
|
SOCKET, HOSE COUPLING |
|
SAE AS 5951 : 2017
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 5080 PSI (35,000 KPA), 275 DEGREES F (135 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS |
|
MIL-DTL-28840-9 Revision G:2013
|
CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 45 DEGREES, CABLE SEALING AND SHIELD TERMINATION |
|
MIL-DTL-83796-2 Revision C:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE |
|
PREN 6091 : 200P1
|
AEROSPACE SERIES - CIRCLIP |
|
PREN 4833 : DRAFT 2017
|
AEROSPACE SERIES - PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING LOCKED FITTING - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
|
MS 27395 : D
|
ELBOW, FLARELESS, TUBE TO HOSE - 45 DEGREES SWIVEL NUT |
|
MS 27084 : D
|
ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 45 DEGREES |
|
MIL DTL 83798/1 : D
|
FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARED, SWIVEL NUT, STRAIGHT |
|
MIL-DTL-28840-13 Revision F:2013
|
CONNECTORS, ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, PROTECTIVE COVER, RECEPTACLE |
|
MIL-DTL-83513-20 Revision D:2009
|
CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, SOCKET CONTACTS, 3 ROW, SOLDER TYPE, STANDARD PROFILE, 51 CONTACTS, PRINTED CIRCUIT BOARD |
|
MIL-DTL-55302-91 Revision F:2010
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, STRAIGHT-THRU, HERMAPHRODITIC CONTACTS (.100 INCH SPACING) |
|
MIL-DTL-28840-27 Revision D:2013
|
CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 45 DEGREES, METAL CONDUIT FOR EMI SHIELDING |
|
MIL DTL 83798/3 : D
|
FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARED, SWIVEL NUT, 90 DEGREES |
|
SAE AMS 5354 : 2012
|
STEEL, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS, 13CR - 2.0NI - 3.0W, HARDENED AND TEMPERED TO 32 - 38 HRC |
|
MIL-DTL-28840-6 Revision E:2013
|
CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, STRAIGHT, CABLE SEALING AND SHIELD TERMINATION |
|
MIL-DTL-12883-51 Revision B:2003
|
SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, BRACKET AND SOCKET ASSEMBLY FOR RELAYS, 4-POLE, 10 AMPERES (MIL-PRF-6106, MIL-PRF-83536, AND MIL-PRF-83726) |
|
PREN 4836 : DRAFT 2017
|
AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
|
MIL-DTL-28754-40 Revision C:2015
|
CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR ASSEMBLY, SCREW |
|
SAE MA 3375 : 2011
|
STUDS, CORROSION AND HEAT RESISTANT STEEL, UNS S66286 TENSILE STRENGTH 900 MPA, PROCUREMENT SPECIFICATION, METRIC, FSC 5307 |
|
SAE AS 81703 : 2012
|
CONNECTORS, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING |
|
SAE AS 83819 : 2013
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 1400 CPM (15 FPM), OSCILLATION, -65 TO +160 DEGREES F (-54 TO +71 DEGREES C) |
|
MIL STD 1568 : D
|
MATERIALS AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN AEROSPACE WEAPONS SYSTEMS |
|
SAE AMS 5353E : 2007(R2015)
|
STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 16CR - 1.8NI - 0.08N, AS CAST |
|
SAE AS 5887 : 2014
|
INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED PROCUREMENT SPECIFICATION FOR |
|
SAE AS 5420 : 2017
|
HOSE ASSEMBLY, HEATED, 125 PSIG, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION |