Skip to content
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Go to AMERICAS site X
Please enter a keyword to search

  • SAE AMS 2806D : 2013

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    Add to Watchlist
    View superseded by
    This Standard has been added successfully to your Watchlist.
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You need to be logged in to add this standard to your Watchlist.
    Please log in now or create an account to add.
    You already added this Product in the Watchlist.

    IDENTIFICATION BARS, WIRE, MECHANICAL TUBING, AND EXTRUSIONS, CARBON AND ALLOY STEELS AND CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS

    Available format(s):  Hardcopy, PDF

    Superseded date:  07-08-2020

    Language(s):  English

    Published date:  31-12-2012

    Publisher:  SAE International

    Add to Watchlist

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 SCOPE
    2 APPLICABLE DOCUMENTS
    3 TECHNICAL REQUIREMENTS
    4 QUALITY ASSURANCE PROVISIONS
    5 PREPARATION FOR DELIVERY
    6 ACKNOWLEDGMENT
    7 REJECTIONS
    8 NOTES

    Abstract - (Show below) - (Hide below)

    This specification covers procedures for identifying bars, wire, mechanical tubing, and extrusions of carbon and alloy steels and corrosion and heat-resistant steels and alloys.

    General Product Information - (Show below) - (Hide below)

    Committee AMS B
    Development Note Together with SAE AMS 2807 supersedes SAE AMS STD 182 (04/2003) Supersedes FED STD 182 (B) and FED STD 183 (C). (08/2005)
    Document Type Standard
    Publisher SAE International
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    SAE AMS 5925 : 2012 STEEL, CORROSION -RESISTANT, BARS, WIRE, AND FORGINGS, 15.5CR - 1.8MO - 0.20N (0.37 - 0.45C), ELECTROSLAG REMELTED
    SAE AMS 5697 : 2018 STEEL, CORROSION-RESISTANT, WIRE, 19CR - 9.5NI (304), SOLUTION HEAT TREATED
    SAE AMS 7713 : 2016 IRON, ELECTRICAL, BAR AND STRIP, COLD FINISHED, ANNEALED
    MIL DTL 32477 : 0 ROD AND BAR, COBALT-NICKEL-CHROMIUM-IRON-MOLYBDENUM ALLOY, FOR USE IN CRITICAL SEAWATER APPLICATIONS
    SAE AMS 6260S : 2016 STEEL, BARS, FORGINGS, AND TUBING, 1.2CR - 3.2NI - 0.12MO (0.07 - 0.13C) (9310)
    SAE AMS 6263 : 2016 STEEL BARS, FORGINGS, AND TUBING, 1.2CR - 3.2NI - 0.12MO (0.11 - 0.17C) (9315)
    SAE AMS 5747 : 2012 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 0.95CB(NB) - 2.5TI - 0.70AL - 7.0FE, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 5070 : 2016 STEEL, BARS AND FORGINGS, 0.18 - 0.23C (SAE 1022)
    SAE AMS 5843 : 2016 COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, WORK STRENGTHENED, AND AGED
    SAE AMS 5937 : 2012 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 12CR - 11NI - 2MO - 1.5AL - 0.3TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 6330 : 2017 STEEL BARS, FORGINGS, AND TUBING, 0.65CR - 1.25NI (0.33 - 0.38C)
    SAE AMS 5935 : 2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 12CR - 10NI - 2MO - 0.9AL - 0.3TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 5645 : 2016 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED
    SAE MAM 6304 : 1994 LOW-ALLOY STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C)
    SAE AMS 5663 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 6527 : 2018 STEEL, BARS AND FORGINGS, 2.0CR - 10NI - 14CO - 1.0MO (0.15 - 0.19C), VACUUM MELTED, NORMALIZED AND OVERAGED
    SAE AMS 5625 : 2018 STEEL BARS, HIGH EXPANSION, 9.5NI - 5.5MN (0.55 - 0.65C), COLD FINISHED
    SAE AMS 5732 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS6328N : 2017 STEEL, BARS, FORGINGS, AND TUBING, 0.50CR - 0.55NI - 0.25MO (0.48 TO 0.53C) (SAE 8750)
    SAE AMS 7913 : 2015 ALUMINUM-BERYLLIUM ALLOY, SHEET AND PLATE, 38AL - 62BE
    SAE AMS 6274 : 2016 STEEL BARS, FORGINGS AND TUBING, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620)
    SAE AMS 5731 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED
    SAE AMS 5653 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (0.030 MAX C) (316L), SOLUTION HEAT TREATED
    SAE AMS 5622 : 2013 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE, CONSUMABLE ELECTRODE REMELTED
    SAE AMS 6257 : 2016 STEEL BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.40 - 0.44C), CONSUMABLE ELECTRODE VACUUM REMELTED, NORMALIZED AND TEMPERED
    SAE AMS 6539 : 2013 STEEL BARS, FORGINGS, AND TUBING, 1.7CR - 3.8NI - 0.3MO - (0.32-0.38 C), AIRCRAFT-QUALITY
    SAE AMS5624F:1989(S2017) Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold Finished(STABILIZED Apr 2017)
    SAE AMS 5853 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS AND WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C) SOLUTION TREATED AND WORK-STRENGTHENED, 160 KSI (1103 MPA) TENSILE STRENGTH
    SAE AMS 6519 : 2014 STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 19NI - 3.0MO - 1.4TI - 0.10AL PREMIUM AIRCRAFT QUALITY DOUBLE VACUUM MELTED, ANNEALED
    SAE AMS4675E : 2017 NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 67NI - 30CU
    SAE AMS 7908 : 2015 BERYLLIUM NEAR-NET PREFORMS, STANDARD GRADE, HOT ISOSTATIC PRESSED
    SAE AMS 6282 : 2015 STEEL TUBING, MECHANICAL, 0.50CR - 0.55NI - 0.25MO (0.33 - 0.38C) (SAE 8735)
    SAE AMS 5764 : 2014 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS 5.0MN - 22CR - 12.5NI - 2.2MO - 0.20CB - 0.30N - 0.20V SOLUTION HEAT TREATED
    SAE AMS 5674 : 2012 STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 11.5NI - 0.70 CB (SAE 30347) SOLUTION HEAT TREATED
    SAE AMS 5010 : 2014 STEEL BARS FREE-MACHINING COLD DRAWN (SAE 1212 OR SAE 1215)
    SAE AMS 5024 : 2015 STEEL, BARS, FORGINGS, AND TUBING, FREE-CUTTING, 1.5MN (0.32 - 0.39C) (SAE 1137)
    SAE AMS 5834 : 2014 COBALT ALLOY, CORROSION AND HEAT-RESISTANT, ROUND WIRE 20CR - 15NI - 40CO - 7.0MO - 16FE VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, COLD DRAWN, AND AGED
    SAE AMS 6516 : 2017 STEEL, BARS AND FORGINGS 1CR - 10NI - 7CO - 2MO - 1.3W - 0.1V - (0.28 - 0.32C) VACUUM INDUCTION MELTED, VACUUM ARC REMELTED, NORMALIZED AND ANNEALED PRECIPITATION HARDENABLE
    SAE AMS 7910 : 2015 BERYLLIUM NEAR-NET PREFORMS, STANDARD GRADE, COLD ISOSTATIC PRESSED, SINTERED
    SAE AMS 5646 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED
    SAE AMS 5842 : 2016 COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED AND WORK STRENGTHENED
    SAE AMS 5665 : 2012 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 15.5CR - 8.0FE
    SAE AMS 6528 : 2017 STEEL, BARS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), SPECIAL AIRCRAFT QUALITY CLEANLINESS, NORMALIZED
    SAE AMS 6471 : 2014 STEEL, NITRIDING, BARS, FORGINGS, AND TUBING 1.6CR - 0.35MO - 1.13AL (0.38 - 0.43C) (135 MOD) CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 5886 : 2014 ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 50NI - 20CR - 20CO - 5.8MO - 2.2TI - 0.45AL CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 2100 DEGREES F (1149 DEGREES C) SOLUTION HEAT TREATED
    SAE AMS 5771 : 2014 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 7.0CR - 16.5 MO, SOLUTION HEAT TREATED
    SAE AMS 7902 : 2015 BERYLLIUM SHEET AND PLATE, 98BE
    SAE AMS 5955 : 2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS 10CR - 12NI - 2MO - 1.45AL - 1.15TI VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 5734 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C) SOLUTION HEAT TREATED
    SAE AMS 6443 : 1988 STEEL BARS, FORGINGS, AND TUBING - 1.0CR (0.98-1.10C) (SAE 51100) CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 5706 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.006B - 0.05ZR, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1825 TO 1900 DEGREES F SOLUTION HEAT TREATED
    SAE AMS 5631 : 2018 STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 17CR (0.60 - 0.75C) (440A)
    SAE AMS 5628 : 2015 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 16CR - 2.5NI (SAE 51431)
    SAE AMS 7907D : 2015(R2018) BERYLLIUM BARS, RODS, TUBING, AND SHAPES, INSTRUMENT GRADE
    SAE AMS 5643 : 2018 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 6558 : 2013 STEEL, BARS, WIRE, AND FORGINGS 10.5MO - 6W - 3.75CR - 2V (1.25 - 1.40C) POWDER METALLURGY PRODUCT HOT ISOSTATICALLY PRESSED
    SAE AMS 5923 : 2013 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS,17CR - 0.52MO (0.95 - 1.20C) (SAE 51440C), FOR BEARING APPLICATIONS
    SAE AMS 5667 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE EQUALIZED, PRECIPITATION HARDENABLE
    SAE AMS 5940 : 2014 ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 34CO - 3.0CR - 28NI - 3.0CB(NB) - 5.5AL - 0.008B - 25.5FE MULTIPLE MELTED, HIGH TEMPERATURE, OXIDATION-RESISTANT, LOW EXPANSION SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE
    SAE AMS 6514 : 2017 STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18.5NI - 9.0CO - 4.9MO - 0.65TI - 0.10AL CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED
    SAE AMS 5651 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 25CR - 20NI (SAE 30310), SOLUTION HEAT TREATED
    SAE AMS 5900 : 2000 STEEL BARS, FORGINGS, AND TUBING, CORROSION RESISTANT, 14CR - 2.1MO - 0.30CB - 1.0V (1.05 - 1.15C), PREMIUM AIRCRAFT QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED
    SAE AMS 6280 : 2017 STEEL BARS, FORGINGS, AND RINGS, 0.50CR - 0.55NI - 0.20MO (0.28 - 0.33C) (SAE 8630)
    SAE AMS 6304 : 2016 LOW-ALLOY STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C)
    SAE AMS 6378 : 2014 STEEL BARS, 1.0CR - 0.20MO - 0.45SE (0.39 - 0.48C) (4142H MODIFIED), DIE-DRAWN, 130 KSI (896 MPA) YIELD STRENGTH, FREE MACHINING
    SAE AMS 7906D : 2015(R2018) BERYLLIUM BARS, RODS, TUBING, AND SHAPES, STANDARD GRADE
    SAE AMS 6475 : 2013 STEEL, NITRIDING, BARS, FORGINGS, AND TUBING, 1.1CR - 3.5NI - 0.25MO - 1.2AL (0.21 - 0.26C)
    SAE AMS 5621 : 2015 STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 13CR (0.30-0.40C) (51420), ANNEALED
    SAE AMS 5636 : 2006 STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED AND COLD DRAWN, 100 KSI (689 MPA) TENSILE STRENGTH
    SAE AMS 6370 : 2016 STEEL, BARS, FORGINGS, AND RINGS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130)
    SAE AMS 6413 : 2016 STEEL, MECHANICAL TUBING 0.80CR - 1.8NI - 0.25MO (0.35 - 0.40C) (4337)
    SAE AMS 5442 : 2017 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 5922 : 2015 STEEL, CORROSION-RESISTANT, BARS, AND FORGINGS, 10CR - 5.5NI - 14CO - 2MO - 1W (0.19-0.23C), VACUUM INDUCTION MELTED, VACUUM ARC REMELTED, NORMALIZED, ANNEALED
    SAE AMS 5642 : 2013 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 10.5NI - 0.60CB, FREE-MACHINING, SOLUTION HEAT TREATED
    SAE AMS 5743 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED, SUB-ZERO COOLED, EQUALIZED, AND OVER-TEMPERED
    SAE AMS 6551 : 2013 STEEL BARS, FORGINGS AND TUBING 1.75CR - 4.0NI - 0.5MO - (0.35 - 0.40C) PREMIUM AIRCRAFT QUALITY CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 5629H : 2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 5726 : 2015 STEEL, CORROSION AND HEAT-RESISTANT, BARS AND WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED AND WORK-STRENGTHENED, CONSUMABLE ELECTRODE REMELTED, 200 KSI (1379 MPA) TENSILE STRENGTH CAPABILITY
    SAE AMS 6423 : 2016 STEEL BARS, FORGINGS, AND TUBING, 0.92CR - 0.75NI - 0.52MO - 0.003B - 0.04V (MODIFIED 98BV40)
    SAE AMS 5845 : 2014 ALLOY, CORROSION-RESISTANT, ROUND BARS 20CR - 35NI - 35CO - 10MO VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM REMELTED SOLUTION HEAT TREATED, WORK STRENGTHENED, AND AGED
    SAE AMS 5709 : 2013 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS, 58NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1975 DEGREE F (1079 DEGREE C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED
    SAE AMS 6427 : 2014 STEEL BARS, FORGINGS, AND TUBING, 0.88CR - 1.8NI - 0.42MO - 0.08V (0.25 - 0.33C) (4330 MOD)
    SAE AMS 6547 : 2013 STEEL BARS, FORGINGS, AND TUBINGS, 1.0CR - 3.2NI - 0.2MO - (0.12 - 0.17C), AIRCRAFT QUALITY
    SAE AMS 5611 : 2013 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 12CR, FERRITE CONTROLLED, CONSUMABLE ELECTRODE MELTED
    SAE AMS 6407 : 2017 STEEL, BARS, FORGINGS, AND TUBING, 1.2CR - 2.0NI - 0.45MO (0.27 - 0.33C)
    SAE AMS 5656F : 2015 STEEL, CORROSION RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS, 9.0MN - 20CR - 6.5NI - 0.27N, SOLUTION HEAT TREATED
    SAE AMS 5655 : 2016 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, AND FORGINGS 12.5CR - 0.75NI - 1.0MO - 1.0W - 0.24V (0.20-0.25C) HARDENED AND TEMPERED
    SAE AMS 6447 : 2016 STEEL, BARS, FORGINGS, AND TUBING, 1.4CR (0.93-1.05C) (SAE 52100), ELECTROSLAG REMELTED
    SAE AMS 6431 : 2017 STEEL, BARS, FORGINGS, AND TUBING, 1.05CR - 0.55NI - 1.0MO - 0.11V (0.45 - 0.50C) (D6AC), VACUUM CONSUMABLE ELECTRODE REMELTED
    SAE AMS 5841 : 2016 COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED FOR WORK STRENGTHENING
    SAE AMS 7909 : 2015 ALUMINUM BERYLLIUM, NNS PREFORMS HOT ISOSTATIC PRESSED 38AL - 62BE
    SAE AMS 7727F : 2017(S2019) IRON-NICKEL-COBALT ALLOY, BARS AND FORGINGS, 53FE - 29NI - 17CO, LOW EXPANSION, GLASS SEALING
    SAE AMS 6511 : 2012 STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18NI - 8.5CO - 3.2MO - 0.20TI - 0.10AL DOUBLE VACUUM MELTED, ANNEALED
    SAE AMS 5666H : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, EXTRUSIONS, AND RINGS, 62NI - 21.5CR - 9.0MO - 3.65CB (NB), ANNEALED
    SAE AMS 5701 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED
    SAE AMS 6300 : 2015 STEEL BARS AND FORGINGS, 0.25MO (0.35 - 0.40C) (SAE 4037)
    SAE AMS 5857 : 2013 STEEL, CORROSION-RESISTANT, BARS AND WIRE, 19CR - 10NI (304), HIGH YIELD STRENGTH, SOLUTION HEAT TREATED AND COLD WORKED
    SAE AMS 5768 : 2018 ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB - 0.15N - 31FE, SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 5745 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 16.5CR - 4.5NI - 2.9MO - 0.10N EQUALIZED AND OVER-TEMPERED
    SAE AMS 6472 : 2014 STEEL, BARS AND FORGINGS, NITRIDING 1.6CR - 0.35MO - 1.1AL (0.38 - 0.43C) (135 MOD) HARDENED AND TEMPERED, 112 KSI (772 MPA) TENSILE STRENGTH
    SAE AMS 5635 : 2018 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9NI - 0.21PB (303PB), FREE-MACHINING, SOLUTION HEAT TREATED
    SAE AMS 6494 : 2016 STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 2.50NI - 2.0MO - 1.10SI (0.10 - 0.20C) AIRCRAFT-QUALITY
    SAE AMS 5715 : 2014 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 60.5NI - 23CR - 14FE - 1.4AL, ANNEALED
    SAE AMS 5618 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C), CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 6417 : 2015 STEEL, BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.38 - 0.43C), CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 5754 : 2012 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18.5FE, SOLUTION HEAT TREATED
    SAE AMS 5755 : 2014 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 64NI - 5.0CR - 24.5MO - 5.5FE, SOLUTION HEAT TREATED
    SAE AMS 5716 : 2016 IRON-NICKEL ALLOY, HEAT RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 44FE - 18.5CR - 35.5NI - 1.1SI, SOLUTION HEAT TREATED
    SAE AMS 5931 : 2012 STEEL, BARS, WIRE, FORGINGS, EXTRUSIONS, TUBING, AND RINGS WEAR, GALLING, AND CORROSION RESISTANT - 5.0MN - 3.5SI - 16.5CR - 5.0NI - 0.14N - SOLUTION HEAT TREATED
    SAE AMS 6478 : 2001 STEEL, BARS AND FORGINGS - 3.1CR - 11.5NI - 13.5CO - 1.2MO (0.21 - 0.25C) VACUUM MELTED, ANNEALED HEAT TREATABLE TO 290 KSI (1999 MPA) TENSILE STRENGTH
    SAE AMS 6264 : 2014 STEEL, CARBURIZING GRADE, BARS, FORGINGS, AND TUBING 1.2CR - 3.2NI - 0.12MO (0.14 - 0.20C) (9317)
    SAE AMS 6340 : 2014 STEEL BARS, FORGINGS, AND TUBING 0.88CR - 1.8NI - 0.42MO - 0.08V (0.28 - 0.33C) (4330 MOD) CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 5700G : 2018 STEEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 13.5CR - 13.5NI - 0.35MO - 2.2W, ANNEALED
    SAE AMS 6348 : 2013 STEEL, BARS, 0.95CR - 0.20MO (0.28 TO 0.33C) (SAE 4130), NORMALIZED
    SAE AMS 6444 : 2015 STEEL, BARS, FORGINGS, AND TUBING, 1.45CR (0.93 - 1.05C) (SAE 52100), PREMIUM AIRCRAFT-QUALITY, CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 5702 : 2018 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED
    SAE AMS 5894 : 2016 COBALT ALLOYS, BARS, SHEET, AND PLATE, 60CO - 28CR - 4.5W - 1.15C, SOLUTION HEAT TREATED
    SAE AMS 5932 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS AND TUBING 14.5CR - 2.3NI - 12.5CO - 4.0MO - 0.60V - 0.03CB(NB), CARBURIZING, PREMIUM AIRCRAFT-QUALITY, DOUBLE VACUUM MELTED
    SAE AMS 5895 : 2015 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED, WELDING GRADE, PRECIPITATION HARDENABLE
    SAE AMS5061H:2009(R2017) STEEL, LOW CARBON BARS, AND WIRE, 0.08 - 0.20
    SAE AMS 5022 : 2015 STEEL, BARS, FORGINGS, AND TUBING, FREE-CUTTING, 0.14 - 0.20C (SAE 1117)
    SAE AMS 6371L : 2017 STEEL, MECHANICAL TUBING, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130)
    SAE AMS 6278 : 2016 STEEL, BARS, FORGINGS, AND TUBING, 4.1CR - 3.4NI - 4.2MO - 1.2V (0.11 - 0.15C), PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED
    SAE AMS 6327L : 2017 STEEL BARS AND FORGINGS, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740), HEAT TREATED, 125 KSI (862 MPA) TENSILE STRENGTH (COMPOSITION SIMILAR TO UNS G87400)
    SAE AMS 6549 : 2013 STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.2NI - 0.2MO (0.12 - 0.17C), PREMIUM AIRCRAFT-QUALITY, DOUBLE VACUUM MELTED
    SAE MAM 6415 : 1998 STEEL, BARS, FORGINGS, AND TUBING, 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340)
    SAE AMS 6409E : 2016 STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) SPECIAL AIRCRAFT QUALITY CLEANLINESS, NORMALIZED AND TEMPERED
    SAE AMS 6320 : 2017 STEEL BARS, FORGINGS, AND RINGS 0.50CR - 0.55NI - 0.25MO (0.33 - 0.38C) (8735)
    SAE AMS 5652J : 2016 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS 25CR - 20NI - 2.0SI (314) SOLUTION HEAT TREATED
    SAE AMS5766E:2014 ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 21CR - 32.5NI - 0.38TI - 0.38AL - 45FE, SOLUTION HEAT TREATED
    SAE AMS 5938 : 2011 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 10CR - 12NI - 2MO - 1.45AL - 1.15TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 6323 : 2017 STEEL, MECHANICAL TUBING 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740)
    SAE AMS 4676 : 2017 NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 66.5NI - 3.0AL - 0.62TI - 28CU, HOT-FINISHED, PRECIPITATION HARDENABLE
    SAE AMS5751F : 1982(S2017) Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted
    SAE AMS 6477 : 2015 STEEL, BARS, FORGINGS, AND TUBING, 0.80CR (0.90 - 1.03C), FOR BEARING APPLICATIONS
    SAE AMS 5623 D :1990(S2017) STEEL BARS AND FORGINGS, HIGH EXPANSION, 9.5NO - 5.5MN (0.55 - 0.65C) ANNEALED
    SAE AMS 6509A : 2017 STEEL BARS AND FORGINGS 3.5CR - 7.5NI - 16.3CO - 1.75MO - 0.2W - (0.09 - 0.13C) DOUBLE VACUUM MELTED, NORMALIZED, ANNEALED
    SAE AMS 5650 : 2018 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 23CR - 13.5NI (309S), SOLUTION HEAT TREATED
    SAE AMS 6302K : 2017 LOW-ALLOY STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.65SI - 1.25CR - 0.50MO - 0.25V (0.28 - 0.33C)
    SAE AMS 5713K : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 6292 : 2014 STEEL BARS AND FORGINGS, CARBURIZING 1.8NI - 0.25MO (0.15 - 0.20C) (SAE 4617)
    SAE AMS 5772 E: 2016 COBALT ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 40CO - 22CR - 22NI - 14.5W - 0.07LA, SOLUTION HEAT TREATED
    SAE AMS 5069 : 2001(S2016) STEEL BARS, FORGINGS, AND TUBING 0.15 - 0.20C (SAE 1018)
    SAE AMS 6324 : 2014 STEEL BARS, FORGINGS, AND TUBING, 0.65CR - 0.70NI - 0.25MO (0.38 - 0.43C) (8740 MODIFIED)
    SAE AMS 6415 : 2016 STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340)
    SAE AMS 5854 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 61NI - 20.5CR - 8.5MO - 3.4CB(NB) - 1.3TI - 5.0FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION HEAT TREATED
    SAE AMS 6490 : 2014 STEEL BARS, FORGINGS, AND TUBING 4.0CR - 4.2MO - 1.0V (0.77 - 0.85C) (M-50) PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 6381 : 2017 STEEL, MECHANICAL TUBING, 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140)
    SAE AMS 5661 : 2012 NICKEL-IRON ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS - 42.5NI - 12.5CR - 5.8MO - 2.9TI - 0.015B - 35FE - CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED
    SAE AMS 6414 : 2016 STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) VACUUM CONSUMABLE ELECTRODE REMELTED
    SAE AMS5640V:2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9.0NI, FREE MACHINING
    SAE AMS 5763E : 2016 STEEL, CORROSION RESISTANT BARS, FORGINGS, TUBING, AND RINGS, 15CR - 6.5NI - 0.75MO - 0.50CB (NB) - 1.5CU, SOLUTION HEAT TREATED
    SAE AMS 5630 : 2013 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C)
    SAE AMS 5641 : 2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18.5CR - 10NI - 0.22SE (303SE), FREE-MACHINING; SWAGING OR UPSETTING SOLUTION HEAT TREATED
    SAE AMS 5637 : 2012 STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH
    SAE AMS 5649 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 13NI - 2.1MO, FREE MACHINING, SOLUTION HEAT TREATED
    SAE AMS 5632 : 2018 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.50MO (0.95 - 1.20C) (440F), FREE-MACHINING, ANNEALED
    SAE AMS 6529 : 2017 STEEL, BARS, 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140), SPECIAL AIRCRAFT-QUALITY CLEANLINESS, NORMALIZED
    SAE AMS 5833 : 2014 COBALT ALLOY, CORROSION AND HEAT-RESISTANT, ROUND WIRE 20CR - 15NI - 40CO - 7.0MO - 16FE SOLUTION HEAT TREATED AND COLD DRAWN
    SAE AMS 6346 : 2013 STEEL BARS, 0.95CR - 0.20MO (0.28 TO 0.33C) (SAE 4130), HARDENED AND TEMPERED, 125 KSI (862 MPA) TENSILE STRENGTH
    SAE AMS 5844 : 2014 ALLOY, CORROSION-RESISTANT, ROUND BARS, 20CR - 35NI - 35CO - 10MO, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM REMELTED, SOLUTION HEAT TREATED AND WORK STRENGTHENED
    SAE AMS 6270 : 2014 STEEL, BARS, FORGINGS, AND TUBING 0.50CR - 0.55NI - 0.20MO (0.13 - 0.18C) (SAE 8615)
    SAE AMS 6303 : 2018 STEEL BARS AND FORGINGS, LOW ALLOY, HEAT-RESISTANT, 0.65SI - 1.25CR - 0.50MO - 0.85V (0.25 - 0.30C)
    SAE AMS 5678 : 2013 STEEL, CORROSION RESISTANT, WIRE, 17CR - 7.1NI - 1.1AL, COLD DRAWN, PRECIPITATION-HARDENABLE
    SAE AMS 5890 : 2015 NICKEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND EXTRUSIONS, THORIA DISPERSION STRENGTHENED, 2.2THO[2], STRESS-RELIEVED
    SAE AMS 6277 : 2016 STEEL BARS, FORGINGS, AND TUBING, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620), VACUUM ARC OR ELECTROSLAG REMELTED
    SAE AMS 5762 : 2016 STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 5.8MN - 17CR - 5.8NI - 2.0CU - 0.26S, FREE MACHINING, SOLUTION HEAT TREATED
    SAE AMS 5929 : 2014 STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 11.5CR -10NI - 1.0AL - 0.5TI - 1.0CU - 1.0W, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 6281 : 2015 STEEL, MECHANICAL TUBING, 0.50CR - 0.55NI - 0.20MO (0.28 - 0.33C) (SAE 8630)
    SAE AMS 7911 : 2015 ALUMINUM BERYLLIUM, PREFORMS HOT ISOSTATIC PRESSED AND HEAT TREATED 38AL - 62BE
    SAE AMS 6479 : 2015 STEEL, BARS, FORGINGS, AND TUBING 1.45CR (0.93-1.05C) (SAE 52100) SPECIAL AIRCRAFT-QUALITY CLEANLINESS
    SAE AMS 6255F : 2016 STEEL BARS, FORGINGS, AND TUBING, 1.1SI - 1.45CR - 1.0MO - 0.08AL (0.16 - 0.22C), DOUBLE VACUUM MELTED
    NASA STD 6002 : 2008 APPLYING DATA MATRIX IDENTIFICATION SYMBOLS ON AEROSPACE PARTS
    SAE AMS 7910D:2015(R2018) BERYLLIUM NEAR-NET PREFORMS, STANDARD GRADE, COLD ISOSTATIC PRESSED, SINTERED
    NASA HDBK 6003 : 2008 APPLICATION OF DATA MATRIX IDENTIFICATION SYMBOLS TO AEROSPACE PARTS USING DIRECT PART MARKING METHODS/TECHNIQUES
    SAE AMS 7904E : 2015(R2018) BERYLLIUM BARS, RODS, TUBING, AND SHAPES, HIGH DUCTILITY GRADE
    SAE AMS 6276 : 2016 STEEL, BARS, FORGINGS, AND TUBING, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620), CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 5441 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE
    SAE AMS 6429 : 2014 STEEL BARS, FORGINGS, TUBING, AND RINGS 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD) CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 6412 : 2015 STEEL, BARS AND FORGINGS 0.80CR - 1.8NI - 0.25MO (0.35 - 0.40C) (4337)
    SAE AMS 5738 : 2013 STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9NI (SAE 30303F), FREE MACHINING, HIGH YIELD STRENGTH, SOLUTION HEAT TREATED AND COLD WORKED
    SAE AMS 5614 : 2013 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, AND FORGINGS 12CR - 0.50MO, ANNEALED
    SAE AMS 5744 : 2013 STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 15.5CR - 4.5NI - 2.9MO - 0.10N, HEAT TREATED, 170 KSI (1172 MPA) TENSILE STRENGTH
    SAE AMS 5627 : 2013 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR (SAE 51430), ANNEALED
    MIL S 18728 : D STEEL PLATE, SHEET, AND STRIP, ALLOY, 8630, AIRCRAFT QUALITY
    SAE AMS 6482 : 2015 STEEL BARS, FORGINGS, AND TUBING, 1.5SI - 1.25CR - 3.8NI - 0.50MO - 0.30V (0.40C) VACUUM REMELTED, ANNEALED
    SAE AMS 5612 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 12CR, FERRITE CONTROLLED, ANNEALED
    SAE AMS 6294 : 2014 STEEL BARS AND FORGINGS, CARBURIZING 1.8NI - 0.25MO (0.17 - 0.22C) (SAE 4620)
    SAE AMS 6499 : 2015 STEEL, BARS, FORGINGS, AND TUBING, 2.7SI - 0.85CR - 1.8NI - 0.4MO - 0.2V - (0.37 - 0.44C), DOUBLE VACUUM MELTED
    SAE AMS 5749 : 2014 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING 14.5CR - 4.0MO - 1.2V (1.10-1.20C) PREMIUM QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED
    SAE AMS 6493 : 2013 STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.25NI - 0.40MO (0.17 - 0.22C), ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED, PREMIUM AIRCRAFT-QUALITY
    SAE AMS 6497 : 2013 STEEL BARS, FORGINGS, AND TUBING, NITRIDING 1.4CR - 1.2MO - 0.3V (0.29 - 0.36C), ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED, PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS
    SAE AMS 5737 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 6512 H : 2017 STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18NI - 7.8CO - 4.9MO - 0.40TI - 0.10AL CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED
    SAE AMS 6308 : 2012 STEEL, BARS AND FORGINGS, 0.90SI - 1.0CR - 2.0NI - 3.2MO - 2.0CU - 0.10V (0.07 - 0.13C), VACUUM ARC OR ELECTROSLAG REMELTED
    SAE AMS 6421 : 2016 STEEL BARS, FORGINGS, AND TUBING 0.80CR - 0.85NI - 0.20MO - 0.003B (0.35 - 0.40C) (MODIFIED 98B37)
    SAE AMS 5915 : 2014 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 57NI - 20CR - 10CO - 8.5MO - 2.1TI - 1.5AL - 0.005B, VACUUM INDUCTION AND CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HEAT TREATABLE
    SAE AMS 5711 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 65NI - 15.8CR - 15.2MO - 0.30AL - 0.05LA, SOLUTION HEAT TREATED
    SAE AMS 5671 : 2013 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 6496 : 2013 STEEL BARS, FORGINGS, AND TUBING, NITRIDING, 1.4CR - 1.2MO - 0.3V (0.29 - 0.36C) AIRCRAFT-QUALITY FOR BEARING APPLICATIONS
    SAE AMS 6515 : 2012 STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18.5NI - 12.0CO - 4.9MO - 1.40TI - 0.10AL DOUBLE VACUUM MELTED, ANNEALED
    SAE AMS 6372 : 2017 STEEL, MECHANICAL TUBING, 0.95CR - 0.20MO (0.33 - 0.38C) (SAE 4135)
    SAE AMS 5689 : 2018 STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED
    SAE AMS 5664 : 2017 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1950 DEGREES F (1066 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 6382 : 2014 STEEL, BARS, FORGINGS, AND RINGS 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) ANNEALED
    SAE AMS 5708 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, WIRE FORGINGS, AND RINGS, 58NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1975 DEGREES F (1079 DEGREES C) SOLUTION HEAT TREATED
    SAE AMS 5062J : 2004(S2017) STEEL, LOW CARBON, BARS, FORGINGS, TUBING, SHEET, STRIP, AND PLATE, 0.25 CARBON, MAXIMUM
    SAE AMS 5746 : 2012 ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS - 15CR - 45NI - 4.1MO - 4.1W - 3.0TI - 1.0AL - 31FE (D979) CONSUMABLE ELECTRODE VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 5898 : 2018 STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 15.2CR - 1.0MO - 0.40N - (0.28 - 0.34C), CONSUMABLE ELECTRODE MELTED UNDER PRESSURE
    SAE AMS 6492 : 2013 STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.25NI - 0.40MO (0.17 - 0.22C) AIRCRAFT QUALITY
    SAE AMS 6317K : 2017 STEEL BARS AND FORGINGS, 1.8NI - 0.25MO (0.38 - 0.43C) (4640), HEAT TREATED, 125 KSI (862 MPA) TENSILE STRENGTH
    SAE AMS 5887 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 54NI - 22CR - 12.5CO - 9.0MO - 1.2AL, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, ANNEALED
    SAE AMS 6312 : 2015 STEEL BARS, FORGINGS, AND TUBING, 1.8NI - 0.25MO (0.38 - 0.43C) (4640)
    SAE AMS 6272 : 2014 STEEL BARS, FORGINGS, AND TUBING 0.50CR - 0.55NI - 0.20MO (0.15 - 0.20C) (SAE 8617)
    SAE AMS 5962 : 2012 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, ROUND BARS AND WIRE, 52.5NI - 19CR - 3.0MO - 5.1CB - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION TREATED AND WORK STRENGTHENED, PRECIPITATION HARDENABLE
    SAE AMS 6517A : 2015 STEEL, BARS, AND FORGINGS, 3.5CR - 9.5NI - 18CO - 1.1MO (0.13 - 0.17C) DOUBLE VACUUM MELTED, NORMALIZED, ANNEALED
    SAE AMS 5759M : 2015 COBALT ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGING STOCK, FORGINGS, AND RINGS 52CO - 20CR - 10NI - 15W
    SAE AMS 5703 : 2018 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB - 1.8TI, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED
    SAE AMS 6325 : 2015 STEEL, BARS, AND FORGINGS 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740) HEAT TREATED, 105 KSI (724 MPA) TENSILE STRENGTH
    SAE AMS 5934 : 2016 STEEL, EXTRA HIGH TOUGHNESS, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE
    SAE AMS 6426 : 1990(S2016) STEEL BARS, FORGINGS, AND TUBING, 0.75SI - 1.0CR - 0.58MO (0.80 - 0.90C), CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 6419 : 2015 STEEL, BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.40 - 0.45C), CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 6470 : 2014 STEEL, NITRIDING, BARS, FORGINGS, AND TUBING 1.6CR - 0.35MO - 1.13AL (0.38 - 0.43C) (135 MOD)
    SAE AMS 7912 : 2015 ALUMINUM-BERYLLIUM ALLOY, EXTRUSIONS, 38AL - 62BE, ANNEALED
    SAE AMS 5662 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AI - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE
    SAE AMS 6250 : 2015 STEEL BARS, FORGINGS, AND TUBING, 1.5CR - 3.5NI (0.07 - 0.13C) (3310)
    SAE AMS 5769 : 2014 ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0(CB+TA) - 0.15N - 32FE SOLUTION HEAT TREATED
    SAE AMS 5707 : 2017 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED 1825 TO 1900 DEGREES F (996 TO 1038 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED
    SAE AMS 6543 : 2016 STEEL, BARS AND FORGINGS, 2.0CR - 10NI - 8.0CO - 1.0MO (0.10 - 0.14C) (HY-180), DOUBLE VACUUM MELTED, SOLUTION HEAT TREATED, MARAGE HARDENABLE
    SAE AMS 5717 : 2014 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 45.5NI - 25.5CR - 3.2CO - 3.2MO - 3.2W - 18.5FE SOLUTION HEAT TREATED
    SAE AMS 6305 : 2016 STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C), VACUUM ARC REMELTED
    SAE AMS 6424 : 2017 STEEL BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.49 - 0.55C)
    SAE AMS 6532 : 2014 STEEL, BARS AND FORGINGS, 3.1CR - 11.5NI - 13.5CO - 1.2MO (0.21 - 0.25C) VACUUM MELTED, NORMALIZED AND OVERAGED, PRECIPITATION HARDENABLE
    SAE AMS 6290 : 2013 STEEL, BARS AND FORGINGS, CARBURIZING, 1.8NI - 0.25MO (0.11 - 0.17C) (SAE 4615)
    SAE AMS 5718E : 2016 STEEL, BARS, FORGINGS, TUBING, AND RINGS, CORROSION RESISTANT, 11.8CR - 2.5NI - 1.8MO - 0.33V (0.08 - 0.15C), ANNEALED
    SAE AMS 5919 : 2013 COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, ROUND BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED AND WORK STRENGTHENED, MODIFIED STRENGTH
    SAE AMS 5933 : 1999 STEEL, CORROSION RESISTANT BARS AND FORGINGS, 12.5CR - 1.0NI - 15.5CO - 2.0MO, VACUUM INDUCTION PLUS, VACUUM CONSUMABLE ELECTRODE REMELTED
    SAE AMS 5670 : 2012 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS - 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, 1800 DEGREE F (982 DEGREE C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 6560 : 2013 STEEL BARS, WIRE AND FORGINGS 10CO - 7MO - 6V - 6W - 4CR (2.2 - 2.4C) PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS INERT GAS ATOMIZED AND HOT ISOSTATICALLY PRESSED CONSOLIDATED
    SAE AMS 5920 : 2013 COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, ROUND BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, WORK STRENGTHENED AND AGED, MODIFIED STRENGTH
    SAE AMS6481D:2017 STEEL BARS, FORGINGS, AND TUBING, NITRIDING, 3CR - 1MO - 0.2V - (0.29 - 0.36C), PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED
    SAE AMS 6448 : 2013 STEEL, BARS, FORGINGS AND TUBING 0.95CR - 0.22V (0.48 - 0.53C) (SAE 6150)
    SAE AMS 6299 : 2014 STEEL BARS, FORGINGS, AND TUBING, CARBURIZING, 0.50CR - 1.8NI - 0.25MO (0.17 - 0.23C) (SAE 4320H)
    SAE AMS 7726 H : 2000(S2017) IRON-NICKEL-COBALT ALLOY, WIRE, 53FE - 2.9NI - 17CO, LOW EXPANSION, GLASS SEALING, ANNEALED
    SAE AMS 6430J : 2017 STEEL, BARS, FORGINGS, TUBING, AND RINGS, 0.75MN - 0.78CR - 1.8NI - 0.35MO - 0.20V (0.32 - 0.38C), (4335 MODIFIED)
    SAE AMS 6484 : 2016 STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) NORMALIZED AND TEMPERED
    SAE AMS 6526 : 2016 STEEL, BARS, FORGINGS, TUBING, AND RINGS, 1.0CR - 7.5NI - 4.5CO - 1.0MO - 0.09V (0.29 - 0.34C), CONSUMABLE ELECTRODE VACUUM REMELTED, ANNEALED
    SAE AMS 6498 : 2013 STEEL BARS, FORGINGS, AND TUBING, NITRIDING, 1.4CR - 1.2MO - 0.3V (0.29 - 0.36C), DOUBLE VACUUM MELTED, PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS
    SAE AMS 6342 K:1990(S2015) STEEL BARS, FORGINGS, AND TUBING, 0.80CR - 1.0NI - 0.25MO (0.38 - 0.43C) (SAE 9840)
    SAE AMS 7718 : 2015 NICKEL-IRON ALLOY, MAGNETIC, BARS, RODS, TUBING, AND FORGINGS 50NI - 50FE
    SAE AMS 5060 : 2003(S2016) STEEL, BARS, FORGINGS AND TUBING 0.13 - 0.18C (SAE 1015)
    SAE AMS 5080 : 2016 STEEL, BARS, FORGINGS, AND TUBING, 0.31 - 0.38C (SAE 1035)
    SAE MAM 5706 : 2003 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT, 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4A1 - 0.006B - 0.05ZR, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 995 DEGREES - 1040 DEGREES C SOLUTION HEAT TREATED
    SAE AMS 6408 : 2018 STEEL, HOTWORK TOOL, BARS AND FORGINGS, 5.25CR - 1.5MO - 1.0V (0.35-0.45C) (H-13), ELECTROSLAG REMELTED (ESR) OR CONSUMABLE ELECTRODE VACUUM ARC REMELTED (VAR), ANNEALED
    SAE AMS 6548 : 2013 STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.2NI - 0.2MO (0.12 - 0.17C), PREMIUM AIRCRAFT-QUALITY, ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 6425 : 2015 STEEL, BARS, FORGINGS, AND TUBING, 1.4MN - 1.5SI - 0.30CR - 1.8NI - 0.40MO (0.23 - 0.28C), CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS5659S : 2016 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu
    SAE AMS 5639 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED
    SAE AMS 5648 : 2016 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED
    SAE AMS 5660 : 2015 NICKEL-IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 12.5CR - 42.5NI - 6.0MO - 2.7TI - 0.015B - 34FE, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED
    SAE AMS 5930 : 2017 STEEL, CORROSION-RESISTANT, BARS AND FORGINGS 13.0CR - 2.5NI - 5.5CO - 2.0MO - 0.60V (0.05 - 0.09C) VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED
    SAE AMS 5891 : 2013 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 60NI - 22CR - 2.0MO - 14W - 0.35AL - 0.03LA, ANNEALED
    SAE AMS 5620 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 13CR (0.30 - 0.40C) (SAE 51420F, 51420FSE), FREE-MACHINING GRADE
    MIL DTL 15119 : B TUBING, ROUND, SEAMLESS ALLOY STEEL
    SAE AMS 5647 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED
    SAE AMS 5758 : 2014 ALLOY, CORROSION-RESISTANT, BARS, 20CR - 35NI - 35CO - 10MO, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM REMELTED, SOLUTION HEAT TREATED FOR WORK STRENGTHENING
    SAE AMS 5884 : 2016 IRON-NICKEL ALLOY, BARS, FORGINGS, AND RINGS, 42FE - 37.5NI - 14CO - 4.8CB(NB) - 1.6TI, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE MULTIPLE MELTED, HIGH TEMPERATURE, LOW EXPANSION
    SAE AMS 6491 : 2014 STEEL BARS, FORGINGS, AND TUBING 4.1CR - 4.2MO - 1.0V (0.80 - 0.85C) (M-50) PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED
    SAE AMS 6411 : 2018 STEEL BARS, FORGINGS, AND TUBING, 0.88CR - 1.8NI - 0.42MO - 0.08V (0.28 - 0.33C) (4330 MOD) CONSUMABLE ELECTRODE REMELTED
    SAE AMS 6265 : 2016 STEEL, BARS, FORGINGS, AND TUBING, 1.2CR - 3.25NI - 0.12MO (0.07 - 0.13C) (9310), VACUUM CONSUMABLE ELECTRODE REMELTED
    SAE AMS 6495 : 2016 STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 2.50NI - 2.0MO - 1.10SI (0.10 - 0.20C), PREMIUM AIRCRAFT-QUALITY, ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 5712 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 6322 : 2014 STEEL BARS, FORGINGS, AND RINGS, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740)
    SAE AMS 5773 : 2012 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 15CR - 6.5NI - 0.75MO - 0.30 CB (NB) - 1.5CU, CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 5899 : 2013 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C), POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED
    SAE AMS 6349 : 2017 STEEL BARS, 0.95CR - 0.20MO (0.38 TO 0.43C) (SAE 4140), NORMALIZED
    SAE AMS 4677 : 2017 NICKEL-COPPER ALLOY, CORROSION RESISTANT, BARS AND FORGINGS 66.5NI - 2.9AL - 30CU ANNEALED
    SAE AMS 6487 : 2016 STEEL, BARS, AND FORGINGS, 5.0CR - 1.3MO - 0.50V (0.38 - 0.43C) (H-11), CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 5877 : 2012 IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05LA - 0.20N, SOLUTION HEAT TREATED
    SAE AMS 6557 : 2013 STEEL, BARS, WIRE, AND FORGINGS, 9V - 5.25CR - 1.3MO (1.80 - 1.95C), POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED
    SAE AMS 6442 : 1987 STEEL BARS AND FORGINGS 0.50Cr (0.98-1.10C) (SAE 50100) FOR BEARING APPLICATIONS
    SAE AMS 6428 : 2014 STEEL, BARS, FORGINGS, AND TUBING 0.78CR - 1.8NI - 0.35MO - 0.20V (0.32 - 0.38C) (4335 MOD)
    SAE AMS 5616 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 13CR - 2.0NI - 3.0W ANNEALED
    SAE AMS 5846 : 2016 ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 53NI - 15CR - 18.5CO - 5.0MO - 3.2TI - 4.2AL - 0.03B, DOUBLE VACUUM MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED
    SAE AMS 6440 : 2015 STEEL, BARS, FORGINGS, AND TUBING, 1.45CR (0.93 - 1.05C) (SAE 52100), FOR BEARING APPLICATIONS
    SAE AMS 5926 : 2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, TUBING, AND FORGINGS 15.5CR - 1.5SI - 0.3MO - 0.1N (0.45 - 0.60C) FOR BEARING APPLICATIONS
    SAE AMS 6525 : 2016 STEEL, BARS, FORGINGS, TUBING, AND RINGS, 0.75CR - 9.0NI - 4.5CO - 1.0MO - 0.09V (0.17 - 0.23C), CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 6559 : 2013 STEEL, BARS, WIRE, AND FORGINGS 9.75V - 5.25CR - 1.3MO (2.40 - 2.55C) POWDER METALLURGY PRODUCT HOT ISOSTATICALLY PRESSED
    SAE AMS 6267J: 2016 STEEL BARS, FORGINGS, AND TUBING, 1.2CR - 3.25NI - 0.12MO (0.07 - 0.13C) (9310), ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 5719 : 2012 STEEL BARS, WIRE, FORGINGS, TUBING, RINGS, AND EXTRUSIONS, CORROSION-RESISTANT, 11.8CR - 2.5NI - 1.8MO - 0.33V (0.08 - 0.15C), ANNEALED, VACUUM ARC OR ELECTROSLAG REMELTED
    SAE AMS 6556 : 2013 STEEL, BARS, WIRE, AND FORGINGS, 8V - 4CR - 4W - 3MO (2.45 - 2.55C), POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED
    SAE AMS 5714 : 2018 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT-RESISTANT, 73NI - 15.5CR - 2.5TI - 0.70AL - 7.0FE, PRECIPITATION-HARDENABLE
    SAE AMS 5613 : 2013 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 12.5CR (SAE 51410) ANNEALED
    SAE AMS 5638 : 2015 STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 0.14S - 18CR - 9.5NI - 0.50MO - 0.80AL (303MA), FREE-MACHINING; SWAGING OR UPSETTING, SOLUTION HEAT TREATED
    SAE AMS 6422K : 2016 STEEL, BARS, FORGINGS, AND TUBING, 0.80CR - 0.85NI - 0.20MO - 0.003B - 0.04V (0.38 - 0.43C) (MODIFIED 98BV40)
    SAE AMS 7707 : 2018 IRON, COMMERCIALLY PURE, BAR, SHEET, STRIP, AND PLATE HOT ROLLED, UNANNEALED
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective