SAE AMS QQ N 290 : 2015

Current

Current The latest, up-to-date edition.

NICKEL PLATING (ELECTRODEPOSITED)

Publisher: SAE International

Published:

Available Formats: PDF - English, Hardcopy - English
More Info on product formats

Table of Contents - (Show below) - (Hide below)

1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES

Abstract - (Show below) - (Hide below)

Applies typically for electrodeposited nickel plating on steel, copper and copper alloys, and zinc and zinc alloys, but usage is not limited to such applications.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Revision
Status	Current
Publisher	SAE International
Pages
ISBN
Committee	AMS B
Supersedes	SAE AMS QQ N 290 : 2009

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
QQ N 290 : A	Similar to

Standards Referenced By This Book - (Show below) - (Hide below)

DSCC 87057 : F	CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, SHOCK ENHANCED, TWO-POLE, AUXILIARY CONTACTS
DSCC 93010 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 284 CONTACT, 8 FIBER OPTIC AND SAFETY GROUND
MIL DTL 55302 : G	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES
MIL R 19309 : D	RELAY, SENSITIVE (FOR TORPEDO MARK 37 MOD 2)
MIL-DTL-55302/92F:2010	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, STRAIGHT-THRU, HERMAPHRODITIC CONTACTS (.100 INCH SPACING)
MIL DTL 3933 : L	ATTENUATORS, FIXED, SPACE LEVEL, NON-SPACE LEVEL GENERAL SPECIFICATION FOR
MIL DTL 55302/94 : F	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, INSERT (INSULATOR), RECTANGULAR, POLARIZED, REMOVABLE, CRIMP TYPE HERMAPHRODITIC CONTACTS (.100 INCH SPACING)
MIL DTL 55302/95 : E	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, COMPOSITE WRAPPOST, HERMAPHRODITIC CONTACTS (.100 INCH SPACING)
MIL DTL 55302/7 : E	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
DSCC 04028 : 0	CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 452 CONTACT POSITIONS
MIL DTL 55302/190 : B	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 100 POSITIONS, PRINTED WIRING BOARD (.075 SPACING)
MIL DTL 55302/131 : D	CONNECTORS, PLUG, ELECTRICAL, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RIGHT ANGLE, PIN CONTACTS, 64 OR 96 CONTACT POSITION FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL R 5757 : K	RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR
MIL STD 1130 : C	CONNECTIONS, ELECTRICAL, SOLDERLESS WRAPPED
DSCC 87056 : F	CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, SHOCK ENHANCED, TWO-POLE
MIL DTL 55302/169 : B	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: LOW MATING FORCE, FEMALE BRUSH, STRAIGHT-THROUGH, POLARIZED, (.100 SPACING)
DSCC 87075 : F	RESISTOR, FIXED, FILM, CHIP, FLANGE MOUNT, DOUBLE TAB, HIGH POWER 10 WATTS
MIL DTL 28748/18 : 0	CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, PRINTED WIRING BOARD (PWB) MOUNT, STRAIGHT THROUGH, PIN CONTACTS, SIZE 22
IEEE 1505 : 2010	STANDARD FOR RECEIVER FIXTURE INTERFACE
BS EN 3373-008 : 2012	AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 008: COPPER LUGS NICKEL PLATED RING SHAPED FOR COPPER CONDUCTORS NICKEL PLATED FOR INCH SERIES STUDS UP TO 340 DEGREES C - PRODUCT STANDARD
MIL DTL 55302/20 : E	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACT, STRAIGHT-THRU, FOR PRINTED WIRING BOARDS (.150 SPACING)
MIL DTL 55302/64 : H	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 55302/59 : H	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 90, 100 AND 120 CONTACT POSITIONS FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 21097/2 : F	CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD COMPOSITE, RECEPTACLE, CONTACT SPACING (.200) SINGLE ROW, TYPE CR
MIL DTL 83723 : H	CONNECTORS, ELECTRICAL, CIRCULAR, ENVIRONMENT RESISTING AND HERMETICALLY SEALED, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR
DSCC 85020 : G	HOLDER, ELECTRICAL CARD, CARD GUIDE, METAL, WITHOUT FLARED ENTRY
MIL DTL 55302/138 : C	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN, 160 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 24308 : G	CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR
MIL DTL 55302/157 : B	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, STRAIGHT THRU CONTACTS, 64 OR 96 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
MIL DTL 26482 : H	CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, QUICK DISCONNECT, ENVIRONMENT RESISTING, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR
MS 27308 : C	CONNECTOR, BATTERY CELL, OFFSET
MIL DTL 28748/21 : 0	CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, PRINTED WIRING BOARD (PWB) MOUNT, RIGHT ANGLE, SOCKET CONTACTS, SIZE 22
MIL DTL 55302/164 : D	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG AND/OR RECEPTACLE, 160 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC
DSCC 02007 : A	CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 396 CONTACT POSITIONS
SAE ARP 1311 : 2015	LANDING GEAR STRUCTURES AND MECHANISMS
MIL PRF 83536 : F	RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 25 AMPERES AND BELOW, GENERAL SPECIFICATION FOR
MS 3440 : D	CONNECTORS, RECEPTACLE, ELECTRICAL, NARROW FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H, SERIES 2
MIL DTL 39030/8 : A	DUMMY LOAD, ELECTRICAL, COAXIAL, TYPE 4 (TNC), MEDIUM POWER
MIL DTL 21097/17 : E	CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD CONTACT, SOLDER, REMOVABLE, TYPE CR
MS 3443 : C	CONNECTORS, RECEPTACLE, ELECTRICAL, SOLDER OR WELDED FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H, SERIES 2
MIL PRF 55339/45 : B	ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, IN-LINE, (BETWEEN SERIES SMA PLUG TO SERIES BNC PLUG), CLASS 2
MIL PRF 55339 : C	ADAPTERS, CONNECTORS, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES AND WITHIN SERIES), GENERAL SPECIFICATION FOR
MIL DTL 55302/89 : E	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, RIGHT ANGLE, HERMAPHRODITIC CONTACTS (.100 SPACING)
BS IEC 63004 : 2015	STANDARD FOR RECEIVER FIXTURE INTERFACE
MIL-DTL-28754-35F:2015	CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 3, MALE CONTACT AND INSULATOR BUSHING SET, REMOVABLE WIRE WRAPPOST TERMINAL
MIL DTL 55302/159 : D	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE, 17, 29, 33, 41, 53, AND 65 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC
MIL DTL 55302/8 : F	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, STRAIGHT-THRU, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 55302/1 : E	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR PRINTED WIRING BOARDS (.150 SPACING)
MIL DTL 55302/163 : D	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG, 72, 84, 96, AND 120 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC
DSCC 93007 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 296 CONTACT POSITIONS
DSCC 87058 : F#CAN	CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, SHOCK ENHANCED, THREE-POLE
MIL DTL 55302/18 : B	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PIN, STRAIGHT-THRU, FOR PRINTED WIRING BOARDS (.200 SPACING)
MIL DTL 83538 : D	CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS FOR MIL-STD-1760 APPLICATIONS (METRIC), GENERAL SPECIFICATION FOR
MS 90577 : B	ADAPTER, CONNECTOR, SERIES UHF TO SERIES BNC, TYPE UG-273/U
MIL DTL 55302/55 : G	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 28731 : F	CONNECTORS, ELECTRICAL, RECTANGULAR, REMOVABLE CONTACT, FORMED BLADE, FORK TYPE (FOR RACK AND PANEL AND OTHER APPLICATIONS)
MIL DTL 55302/54 : C	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, STRAIGHT-THRU, HERMAPHRODITIC CONTACT FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 55302/5 : F	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, STRAIGHT-THRU, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
MS 75093 : B	ADAPTER, CONNECTOR, SERIES BNC SOCKET CONTACT TO GR-874 HERMORPHRODITIC
MIL DTL 23971 : E	POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR
MIL DTL 55302/111 : B	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE SOCKET CONTACTS, STRAIGHT-THRU, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
MIL-DTL-55302/93F:2010	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, INSERT (INSULATOR), RECTANGULAR, POLARIZED, REMOVABLE CRIMP TYPE, HERMAPHRODITIC CONTACTS (.100 INCH SPACING)
MIL PRF 49142 : B	CONNECTOR, TRIAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
MIL DTL 55302/154 : C	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, MOUNTING HARDWARE FOR PRINTED WIRING BOARDS
MIL DTL 3933/28 : 0	ATTENUATORS, FIXED, COAXIAL LINE (SMP CONNECTORS - SMP FULL DETENT MALE TO SMP FULL DETENT MALE), 0 DB, FREQUENCY RANGE: DC TO 18 GHZ
MIL DTL 55302/52 : D	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, STRAIGHT-THRU, HERMAPHRODITIC CONTACT FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 8348 : K	GAGE ASSEMBLIES, AIR PRESSURE, DIAL INDICATING CHUCK TYPE, SELF-CONTAINED
MIL DTL 55302/162 : D	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG, 17, 29, 33, 41, 53, AND 65 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC
MIL-DTL-28754-37E:2015	CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 3, FEMALE CONTACT AND POLARIZING BUSHING SET, REMOVABLE WIRE WRAPPOST TERMINAL
MIL DTL 55302/17 : B	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: SOCKET, STRAIGHT-THRU, FOR PRINTED WIRING BOARDS (.200 SPACING)
MS 90579 : B	ADAPTER, CONNECTOR, BETWEEN SERIES (SERIES QL SOCKET TO SERIES C SOCKET) JAM NUT MOUNT, TYPE UG-1375/U
MIL DTL 39030/14 : B	DUMMY LOAD, ELECTRICAL, TYPE 14 (BIFURCATED CONTACT), STRIPLINE, LOW POWER
MIL DTL 39030/13 : B	DUMMY LOAD, ELECTRICAL, TYPE 14 (SOCKET CONTACT), STRIPLINE, LOW POWER
MIL DTL 28748/20 : 0	CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, PRINTED WIRING BOARD (PWB) MOUNT, RIGHT ANGLE, PIN CONTACTS, SIZE 22
MIL DTL 83734 : H	SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, DUAL-IN-LINE (DIPS) AND SINGLE-IN-LINE PACKAGES (SIPS), GENERAL SPECIFICATION FOR
MIL DTL 28804 : D	CONNECTORS, PLUG AND RECEPTACLE, ELECTRIC, RECTANGULAR, HIGH DENSITY, POLARIZATION CENTER JACKSCREW - GENERAL SPECIFICATION FOR
MIL DTL 5757 : N	RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR
MIL DTL 21097/5 : G	CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD MALE ADAPTER, CONTACT SPACING (.200) ALTERNATE DUAL ROW, TYPE CS
MIL DTL 55302/158 : C	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE SOCKET CONTACTS, 64 OR 96 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
MIL DTL 43607 : J	PADLOCK, KEY OPERATED, HIGH SECURITY, SHROUDED SHACKLE
MIL DTL 6807 : F	SWITCHES, ROTARY, SELECTOR POWER, GENERAL SPECIFICATION FOR
DSCC 93004 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 300 CONTACT, 8 FIBER OPTIC POSITIONS
MIL DTL 62011/1 : 0	PUMP, FUEL, ELECTRICALLY-OPERATED: 24-VOLT DC, IN-TANK TYPE, TOP-MOUNTED CONNECTOR, TYPE 1
MIL DTL 25516 : F	CONNECTORS, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR
MIL-DTL-28837D : 2015	MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR
MIL DTL 55302/167 : B	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: LOW MATING FORCE, MALE BRUSH, STRAIGHT-THROUGH, POLARIZED, WITH WRAPPOST TERMINATION (.100 SPACING)
MIL DTL 28748/19 : 0	CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, PRINTED WIRING BOARD (PWB) MOUNT, STRAIGHT THROUGH, SOCKET CONTACTS, SIZE 22
MIL DTL 39030/7 : A	DUMMY LOADS, ELECTRICAL, COAXIAL, TYPE 3 (BNC), LOW POWER
MIL DTL 10884 : H	FASTENERS, SNAP
MIL DTL 39030/6 : C	DUMMY LOADS, ELECTRICAL, COAXIAL, TYPE 5 (N), LOW POWER
MIL DTL 55074/4 : D	CONTACT ASSEMBLY, ELECTRICAL
DSCC 89099 : H	RESISTOR, FIXED, FILM, CHIP, FLANGE MOUNT, SINGLE TAB, HIGH POWER, 10 WATTS
MS 3477 : B	CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, HERMETIC, SOLDERLESS, BOX MOUNTING, BAYONET COUPLING, CLASS N
MIL DTL 55302/16 : C	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PIN, RIGHT-ANGLE, FOR PRINTED WIRING BOARDS (.200 SPACING)
DSCC 93013 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 280 CONTACT, 2 POWER POSITIONS, WITH SAFETY GROUND
MIL DTL 15291 : G	SWITCHES, ROTARY, SNAP ACTION AND DETENT/SPRING RETURN ACTION, GENERAL SPECIFICATION FOR
MIL DTL 55302/96 : F	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, WRAPPOST (REMOVABLE) HERMAPHRODITIC CONTACTS (.100 INCH SPACING)
A A 55563 : D	HOLDER, ELECTRICAL CARD, METAL CARD GUIDE, GENERAL REQUIREMENTS FOR
I.S. EN 3373-008:2012	AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 008: COPPER LUGS NICKEL PLATED RING SHAPED FOR COPPER CONDUCTORS NICKEL PLATED FOR INCH SERIES STUDS UP TO 340 DEGREES C - PRODUCT STANDARD
MIL DTL 55302/58 : J	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 55302/98 : D	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: CONTACT, WRAPPOST REMOVABLE TYPE
MIL R 83726/7 : G	RELAYS, HYBRID, TIME DELAY, ON PICKUP, TYPE 1, CLASS A, 2 AMPERES, 2PDT, FIXED TIME, 0.06 TO 300 SECONDS
MIL DTL 55302/171 : B	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: LOW MATING FORCE, CONTACT BRUSH
MS 3481 : A	TOOL, CONNECTOR ASSEMBLY, FOR MIL-DTL-26482 CONNECTORS
MIL DTL 28754/36 : E	CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 3, FEMALE CONTACT AND GROUNDING BUSHING SET, REMOVABLE WIRE WRAPPOST TERMINAL
MIL S 83505 : B	SOCKET, (LEAD ELECTRONIC COMPONENTS) GENERAL SPECIFICATION FOR
MIL DTL 83517 : B	CONNECTOR, COAXIAL, RADIO FREQUENCY FOR COAXIAL, STRIP OR MICROSTRIP TRANSMISSION LINE, GENERAL SPECIFICATION FOR
MIL STD 1276 : H	LEADS FOR ELECTRONIC COMPONENT PARTS
MIL DTL 55302/160 : D	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE, 72, 84, 96, AND 120 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC
MS 90578 : C	ADAPTER, CONNECTOR, (TWIN BINDING POST-BNC MALE) TYPE UG-1441/U
DSCC 93006 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 296 CONTACT, 2 POWER POSITIONS
MIL DTL 55116 : D	CONNECTORS: MINIATURE AUDIO, FIVE-PIN AND SIX-PIN - GENERAL SPECIFICATION FOR
MIL DTL 39030/5 : C	DUMMY LOADS, ELECTRICAL, COAXIAL, TYPE 4 (TNC), LOW POWER
MIL DTL 39030/3 : E	DUMMY LOADS, ELECTRICAL, COAXIAL, TYPE 1 (SMA), LOW POWER
MIL DTL 3933/27 : 0	ATTENUATORS, FIXED, COAXIAL LINE (SMP CONNECTORS - SMP FULL DETENT MALE TO SMP FULL DETENT MALE), FREQUENCY RANGE: DC TO 18 GHZ
MIL DTL 39030/11 : A	DUMMY LOAD, ELECTRICAL, COAXIAL, TYPE 5 (N), HIGH POWER
MS 90261 : E	ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, BETWEEN SERIES (SERIES C JACK TO SERIES HN PLUG) TYPE UG-703 A/U
MIL DTL 55302/134 : B	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE SOCKET CONTACTS, STRAIGHT THRU 32 OR 64 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 83503 : C	CONNECTORS, ELECTRICAL, FLAT CABLE, AND/OR PRINTED WIRING BOARD, NONENVIRONMENTAL, GENERAL SPECIFICATION FOR
MIL DTL 55302/161 : D	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE, 160 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC
BS EN 3373-014 : 2009	AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 014: IN-LINE SPLICES, INSULATED AND SEALED, FOR CRIMPING ON COPPER CONDUCTORS, TEMPERATURE UP TO 200 DEGREE C - PRODUCT STANDARD
A A 55469 : B	CONNECTORS, ELECTRICAL, PLUGS, TIP (TEST POINT PLUG, BANANA PLUG) GENERAL REQUIREMENTS FOR
MIL DTL 55302/61 : G	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, AND 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 55302/63 : H	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL O 52374 : E	OSCILLATOR: HIGH VOLTAGE, GENERAL SPECIFICATION FOR
MIL DTL 62011 : E	PUMP, FUEL, ELECTRICALLY-OPERATED: 24-VOLT DC, IN-TANK TYPE, GENERAL SPECIFICATION FOR
MS 3449 : E	CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, SINGLE HOLE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H
MIL DTL 55302/166 : B	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: LOW MATING FORCE, MALE BRUSH, STRAIGHT-THROUGH, POLARIZED, FOR MULTILAYERED PRINTING WIRING BOARDS (.100 SPACING)
MIL DTL 55302/97 : D	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: CONTACTS, HERMAPHRODITIC, CRIMP REMOVABLE FOR WIRE (STRANDED)
DSCC 93009 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 356 CONTACT, WITH SAFETY GROUND
MIL DTL 55181 : F	CONNECTORS, PLUG AND RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF), TYPE MW, GENERAL SPECIFICATION FOR
MIL DTL 55302/4 : F	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 55302/56 : H	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
DSCC 93003 : C	CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 372 CONTACT POSITIONS
MIL DTL 55302/192 : A	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, 122 AND 152 POSITIONS, PRINTED WIRING BOARD (.075 SPACING)
MIL DTL 2 : G	VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR
MIL DTL 55302/132 : C	CONNECTORS, PLUG, ELECTRICAL, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: SOCKET CONTACTS, STRAIGHT THRU, 64 OR 96 CONTACT POSITION FOR PRINTED WIRING BOARDS (.100 SPACING)
NASA PRC 5004 : 2004	PROCESS SPECIFICATION FOR ELECTRODEPOSITED NICKEL PLATING
MIL DTL 39030/16 : B	DUMMY LOAD, ELECTRICAL, TYPE 14 (BIFURCATED CONTACT), STRIPLINE, LOW POWER
MS 3473 : B	CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, HERMETIC, SOLDERLESS, SOLDER MOUNTING, BAYONET COUPLING, CLASS N
ARINC 800-2 : 2014	CABIN CONNECTORS AND CABLES - PART 2, SPECIFICATION OF CONNECTORS, CONTACTS, AND BACKSHELLS
MIL DTL 55302/62 : H	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 55302/2 : F	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, STRAIGHT-THRU, FOR PRINTED WIRING BOARDS (.150 SPACING)
MIL DTL 62011/2 : 0	PUMP, FUEL, ELECTRICALLY-OPERATED: 24-VOLT DC, IN-TANK TYPE, SIDE-MOUNTED CONNECTOR, TYPE 2
MIL DTL 55302/53 : C	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, RIGHT-ANGLE, HERMAPHRODITIC CONTACT FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 5423 : E	BOOTS, DUST AND MOISTURE SEAL (FOR TOGGLE AND PUSH-BUTTON SWITCHES, CIRCUIT BREAKERS, AND ROTARY-ACTUATED PARTS), GENERAL SPECIFICATION FOR
MIL DTL 39030/22 : A	DUMMY LOAD, ELECTRICAL, TYPE 14 (TAB CONTACT), STRIPLINE, HIGH POWER
DSCC 04027 : A	CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROWS, 452 CONTACT POSITIONS
DSCC 86100 : D	CONNECTORS, ELECTRICAL, UNSHROUDED HEADERS, PWB TERMINATION
DSCC 87054 : F	CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, SHOCK ENHANCED, ONE-POLE
MIL DTL 39030/20 : D	DUMMY LOADS, ELECTRICAL, TYPE 14 (TAB CONTACT), STRIPLINE, LOW POWER
MIL DTL 55302/19 : E	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS RIGHT-ANGLE, 41 COMPOSITE CONTACT, FOR PRINTED WIRING BOARDS (.150 SPACING)
MIL DTL 55302/60 : J	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 90, 100 AND 120 CONTACT POSITIONS (.100 SPACING)
MIL DTL 55302/191 : C	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 100 POSITIONS, PRINTED WIRING BOARD (.075 SPACING)
MIL DTL 55302/65 : H	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 21097/3 : F	CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD COMPOSITE, ADAPTER, CONTACT SPACING (.200) INDIVIDUAL CONTACTS, TYPE CS
MIL DTL 55302/66 : G	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 12883/50 : B	SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, BRACKETS AND SOCKET ASSEMBLY FOR RELAYS, 2-POLE, 10 AMPERES (MIL-PRF-6106 AND MIL-PRF-83536)
MS 3479 : C	CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, HERMETIC, SOLDERLESS, REAR MOUNTING, JAM NUT, BAYONET COUPLING, CLASS N
MIL DTL 39030/23 : 0	DUMMY LOAD, ELECTRICAL, COAXIAL, TYPE 1 (SMK), DC-32.0 GHZ
MIL DTL 55302/170 : B	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: LOW MATING FORCE, FEMALE BRUSH, RIGHT ANGLE, POLARIZED, FOR MULTILAYERED PRINTED WIRING BOARD (.100 SPACING)
MIL-DTL-28754-34E:2015	CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 3, FEMALE CONTACT AND INSULATOR BUSHING SET, REMOVABLE WIRE WRAPPOST TERMINAL
MIL DTL 55302/133 : C	CONNECTORS, PLUG, ELECTRICAL, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RIGHT ANGLE, PIN CONTACTS, 32 OR 64 CONTACT POSITION FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 55302/57 : H	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 38999 : M	CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED OR BREECH COUPLING), ENVIRONMENT RESISTANT WITH CRIMP REMOVABLE CONTACTS OR HERMETICALLY SEALED WITH FIXED, SOLDERABLE CONTACTS, GENERAL SPECIFICATION FOR
MIL DTL 55302/21 : F	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACT, RIGHT-ANGLE, 92 COMPOSITE CONTACT, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 55302/6 : J	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, STRAIGHT-THRU, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 21097/16 : F	CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD CONTACT, CRIMP, REMOVABLE, TYPE CR
DSCC 86092 : B	HOLDER, ELECTRICAL CARD, CARD GUIDE-RETAINER, LEVER ACTUATED, METAL, FOR COLD PLATE MOUNTING
MIL DTL 22992 : H	CONNECTORS, PLUGS AND RECEPTACLES, ELECTRICAL, WATERPROOF, QUICK DISCONNECT, HEAVY DUTY TYPE, GENERAL SPECIFICATION FOR
MIL STD 868 : B	NICKEL PLATING, LOW EMBRITTLEMENT, ELECTRO-DEPOSITION
MIL-DTL-55302/91F:2010	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, STRAIGHT-THRU, HERMAPHRODITIC CONTACTS (.100 INCH SPACING)
MIL DTL 3643 : B	CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES HN, AND ASSOCIATED FITTINGS, GENERAL SPECIFICATION FOR
MIL DTL 83505 : C	SOCKETS, (LEAD, ELECTRONIC COMPONENTS) GENERAL SPECIFICATION FOR
MIL DTL 55302/22 : F	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, STRAIGHT-THRU, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
MIL DTL 7793 : H	METER, TIME TOTALIZING
DSCC 87062 : F	CIRCUIT BREAKERS, MAGNETIC, PANEL SEAL, SHOCK ENHANCED, TRIP-FREE, SERIES TRIP, THREE POLE, (0.2 TO 30 AMPERES)
MIL DTL 39030/21 : B	DUMMY LOADS, ELECTRICAL, TYPE 14 (TAB CONTACT), STRIPLINE, MEDIUM POWER
MIL DTL 21097/4 : G	CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD COMPOSITE, RECEPTACLE, CONTACT SPACING (.200) ALTERNATE DUAL ROW, TYPE CR
SAE AS 19692 : 2016	AEROSPACE - MILITARY TYPE VARIABLE DELIVERY, PRESSURE COMPENSATED HYDRAULIC PUMP
MS 3442 : C	CONNECTORS, RECEPTACLE, ELECTRICAL, WIDE FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H, SERIES 2
SAE AS 5590 : 2013	CONNECTORS, FIBER OPTIC, ADVANCED, CIRCULAR OR RECTANGULAR, PLUG AND RECEPTACLE, ENVIRONMENT RESISTANT, REMOVABLE TERMINI/CONTACTS, GENERAL SPECIFICATION FOR
MIL DTL 12883/42 : F	SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS (POWER TRANSISTOR, 2 CONTACT, 10 AMPERES, TO-3), RADIAL
DSCC 93011 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 284 CONTACT, 8 FIBER OPTIC AND SAFETY GROUND
MIL DTL 28754 : E	CONNECTORS, ELECTRICAL, MODULAR, AND COMPONENT PARTS GENERAL SPECIFICATION FOR
MIL DTL 39030 : F	DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR
MIL DTL 21604 : G	SWITCHES, ROTARY, MULTIPOLE AND SELECTOR, GENERAL SPECIFICATION FOR
MIL DTL 28731/23 : G	CONNECTOR ELECTRICAL, CONTACT, FORK TYPE, REMOVABLE, DOUBLE WIRE CRIMP
MIL R 83726/8 : F	RELAYS, HYBRID, TIME DELAY, (ON RELEASE), TYPE 2A, CLASS A, 2 AMPERES, 2PDT, FIXED TIME, 0.100 TO 300 SECONDS
MIL DTL 12883/51 : B	SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, BRACKET AND SOCKET ASSEMBLY FOR RELAYS, 4-POLE, 10 AMPERES (MIL-PRF-6106, MIL-PRF-83536, AND MIL-PRF-83726)
MIL PRF 55339/44 : C	ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, IN-LINE, (BETWEEN SERIES SMA JACK TO SERIES BNC PLUG), CLASS 2
DSCC 87055 : G	CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, SHOCK ENHANCED, ONE-POLE, AUXILIARY CONTACTS
DSCC 04054 : 0	RELAYS, ELECTROMAGNETIC, 25 AMPERES, 3 PDT, CONTINUOUS DUTY, HERMETICALLY SEALED, PERMANENT MAGNET DRIVE, AC COIL
SAE AS 81824 : 2016	SPLICE, ELECTRIC, CRIMP, COPPER, ENVIRONMENT RESISTANT
SAE AMS 2460 : 2013	PLATING, CHROMIUM
DSCC 93012 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 280 CONTACT, 2 POWER POSITIONS
PREN 3373-008 : 200P1	AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRICAL CONDUCTORS - PART 008: COPPER LUGS NICKEL PLATED RING SHAPED FOR COPPER CONDUCTORS NICKEL PLATED FOR INCH SERIES STUDS UP TO 340 DEGREES C - PRODUCT STANDARD
DSCC 86037 : B	CONNECTORS, RECEPTACLE, ELECTRICAL, LATCH HOUSINGS, CRIMP TO WIRE CONTACTS, GENERAL DRAWING FOR
PREN 3373-014 : 200P1	AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 014: IN-LINE SPLICES, INSULATED AND SEALED, FOR CRIMPING ON COPPER CONDUCTORS, TEMPERATURE UP TO 200 DEGREES C PRODUCT STANDARD
DSCC 87059 : F	CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, SHOCK ENHANCED, THREE-POLE, AUXILIARY CONTACTS
DSCC 93005 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 300 CONTACT, 8 FIBER OPTIC POSITIONS
DSCC 03023 : A	CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 396 CONTACT POSITIONS
DSCC 84168 : F	HOLDER, ELECTRICAL CARD, CARD GUIDE-RETAINER, LEVER ACTUATED, METAL
DSCC 93002 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 372 CONTACT POSITIONS
DSCC 93008 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 356 CONTACT, WITH SAFETY GROUND
SAE AS 12500 : 2018	CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
SAE AS 39029 : 2017	CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR
I.S. EN 3373-014:2009	AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 014: IN-LINE SPLICES, INSULATED AND SEALED, FOR CRIMPING ON COPPER CONDUCTORS, TEMPERATURE UP TO 200 DEGREE C - PRODUCT STANDARD
DSCC 88052 : D	HOLDER, ELECTRICAL CARD, CARD GUIDE-RETAINER, SCREW ACTUATED, METAL
SAE AMS P 81728 : 2015	PLATING, TIN-LEAD (ELECTRODEPOSITED)
IEC 63004 : 1ED 2015	STANDARD FOR RECEIVER FIXTURE INTERFACE
NFPA 99 HDBK : 2018	HEALTH CARE FACILITIES CODE HANDBOOK
NFPA 99 : 2018	HEALTH CARE FACILITIES CODE
DSCC 87060 : F	CIRCUIT BREAKERS, MAGNETIC, PANEL SEAL, SHOCK ENHANCED, TRIP-FREE, SERIES TRIP, SINGLE POLE, (0.2 TO 30 AMPERES)
MIL DTL 39024 : C	JACK, TIP (TEST POINT, PANEL OR PRINTED WIRING TYPE), GENERAL SPECIFICATION FOR

Standards Referencing This Book - (Show below) - (Hide below)

ASTM E 376 : 2011-07	PRACTICE FOR MEASURING COATING THICKNESS BY MAGNETIC-FIELD OR EDDY-CURRENT (ELECTROMAGNETIC) TESTING METHODS
ASTM B 568 : 1998	TEST METHOD FOR MEASUREMENT OF COATING THICKNESS BY X-RAY SPECTROMETRY
ASQ Z1.4:2003	Sampling Procedures And Tables For Inspection By Attributes
ASTM B 487 : 1985	TEST METHOD FOR MEASUREMENT OF METAL AND OXIDE COATING THICKNESS BY MICROSCOPICAL EXAMINATION OF A CROSS SECTION
SAE AMS 2759/9 : 2009	HYDROGEN EMBRITTLEMENT RELIEF (BAKING) OF STEEL PARTS
ASTM F 519 : 2017-04	TEST METHOD FOR MECHANICAL HYDROGEN EMBRITTLEMENT EVALUATION OF PLATING/COATING PROCESSES AND SERVICE ENVIRONMENTS
MIL DTL 5002 : E	SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS
SAE AMS 2750 : 2012	PYROMETRY
ASTM B 530 : 2009	TEST METHOD FOR MEASUREMENT OF COATING THICKNESSES BY THE MAGNETIC METHOD: ELECTRODEPOSITED NICKEL COATINGS ON MAGNETIC AND NONMAGNETIC SUBSTRATES
ASTM B 529 : LATEST	TEST METHOD FOR MEASUREMENT OF COATING THICKNESS BY THE EDDY CURRENT TEST METHOD: NON-CONDUCTIVE COATING ON NON-MAGNETIC BASIS METALS
ASTM B 571 : 1997	PRACTICE FOR QUALITATIVE ADHESION TESTING OF METALLIC COATINGS
MIL STD 1916 : 0	DOD PREFERRED METHODS FOR ACCEPTANCE OF PRODUCT
ASTM B 504 : 1990	TEST METHOD FOR MEASUREMENT OF THICKNESS OF METALLIC COATINGS BY THE COULOMETRIC METHOD

Add To Cart

Product Format

Quantity

add to cart