|
SAE AS 95234 : 2014
|
CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR |
|
MIL DTL 32371/8 : 0
|
FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, 90 DEGREES ELBOW, BULKHEAD |
|
MIL PRF 7907 : C
|
CLEANING COMPOUND, DECONTAMINATING (FOR SOILED AND RADIOACTIVE CONTAMINATED SURFACES) |
|
MIL-DTL-32460-3 Base Document:2013
|
FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
|
MIL-DTL-83413-5 Revision C:2013
|
CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: RECEPTACLES, ONE PIECE |
|
MIL-DTL-32480-1 Base Document:2014
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, FLARELESS MALE TO ORFS MALE |
|
MIL DTL 32372/4 : A
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS BULKHEAD |
|
MS51819 Revision E:1987
|
ADAPTER, STRAIGHT, PIPE TO TUBE MALE PIPE END, FLARELESS TYPE, HYDRAULIC |
|
MS51510 Revision D:2017
|
TEE, TUBE, 37 DEGREE FLARED |
|
MS51525 Revision B:1988
|
FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED |
|
MS 28780 : F
|
FITTING END, 45 DEGREES ELBOW, ATTACHABLE, HYDRAULIC, HIGH PRESSURE HOSE 3000 PSI, FLARED TUBE |
|
MIL-DTL-52404 Revision C:2010
|
CONNECTIONS: HOSE, FIRE AND WATER |
|
MS 39210 : K
|
NUTS, TUBE COUPLING - SAFETY SLEEVE COMPRESSION TYPE |
|
MIL-DTL-52471-10 Revision B:2008
|
HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R12 FOUR-SPIRAL-WRAP REINFORCEMENT HOSE |
|
MIL DTL 52525/35 : B
|
FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE |
|
MIL-DTL-32480-5 Base Document:2014
|
FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, FLARELESS MALE TO ORFS BULKHEAD |
|
MS51814 Revision E:1987
|
NIPPLE, TUBE, BULKHEAD, REGULAR HEX, FLARELESS TYPE, HYDRAULIC |
|
MIL DTL 32371/10 : 0
|
FITTINGS, HYDRAULIC TUBE, SLEEVE, DOUBLE ANGLE |
|
MIL DTL 32371/4 : 0
|
FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, TEE, SPHERICAL ON BRANCH |
|
AA-C-2786 Base Document:2004
|
CABINET, SECURITY, INFORMATION PROCESSING SYSTEM STORAGE, CLASS 5 |
|
MIL-DTL-52525-10 Revision D:2011
|
FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT |
|
16/30354034 DC : 0
|
BS EN 4854-1 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, NARROW SERIES - DIMENSIONS AND LOADS |
|
MIL DTL 32372/12 : A
|
FITTING, ADAPTER, TEE, HYDRAULIC AND PNEUMATIC, NPTF MALE ON BRANCH TO ORFS MALE RUN TO RUN |
|
MIL-DTL-12520-9 Revision B:2005
|
CONNECTORS, RECEPTACLE, ELECTRICAL WATERPROOF (SHELL SIZE 20, FEMALE INSERTS) |
|
MS51519 Revision C:2017
|
NIPPLE, TUBE, LARGE HEX, FOR USE WITH O-RING, 37 DEGREE FLARED |
|
MIL-DTL-83796-10 Revision A:2014
|
HOSE ASSEMBLY, RUBBER, LIGHT WEIGHT, INTERNAL SUPPORT COIL, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE |
|
MIL-DTL-52525-7 Revision D:2011
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, SHORT DROP |
|
AN 915 : 0014
|
ELBOW, PIPE, 45 DEGREES |
|
MIL DTL 32464/6 : 0
|
MALE ADAPTER, UNION CROSS, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 37 DEGREES SPHERICAL ON BRANCH, 1500-3000 PSI |
|
MS 39206 : G
|
ADAPTERS, STRAIGHT, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, MALE PIPE END |
|
A-A-59440-1 Revision B:2012
|
COCK-VALVE, CENTER DRAIN, INTERNAL SEAT OR EXTERNAL SEAT, 150 PSI, BRASS, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS |
|
A-A-59440-2 Revision B:2012
|
COCK-VALVE, DRAIN, WITH HOSE BIB, 150 PSI, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS |
|
MIL-DTL-32480 Base Document:2014
|
ADAPTER, HYDRAULIC AND PNEUMATIC, FLARELESS TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR |
|
MIL-DTL-4510 Revision F:2009
|
SPOTLIGHTS, INCANDESCENT, ROOF-MOUNTED, AUTOMOTIVE |
|
MIL DTL 32464/1 : 0
|
MALE ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
MIL DTL 32464/12 : 0
|
MALE ADAPTER, TEE, 37 DEGREES SPHERICAL TO ANPT, ANPT ON BRANCH, 1500-3000 PSI |
|
MIL-DTL-83796-11 Revision A:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE |
|
MIL-DTL-53072 Revision F:2017
|
CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM - APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
|
MS 35758 : D
|
CUPS, GREASE, MANUAL FEED |
|
SAE AS 8952 : 2005
|
BEARINGS, ROLLER, ROD END, ANTIFRICTION SELF-ALIGNING |
|
MIL-DTL-12520-8 Revision B:2005
|
CONNECTOR, RECEPTACLE, ELECTRICAL, WATERPROOF (SHELL SIZE 20, MALE INSERTS) |
|
MS 28781 : E
|
FITTING END, 90 DEGREES ELBOW, ATTACHABLE, HYDRAULIC, HIGH PRESSURE HOSE 3000 PSI, FLARED TUBE |
|
MIL-DTL-5002 Revision E:2011
|
SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
|
SAE AS 1241 : 2016
|
FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT |
|
MS 39199 : G
|
NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE, BULKHEAD MOUNTING |
|
MS51825 Revision H:2008
|
SLEEVES, CLINCHES, TUBE FITTING, FLARELESS TYPE, HYDRAULIC |
|
MIL-DTL-52525-32 Revision A:2008
|
FITTINGS, HOSE, REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPIRAL-WRAP REINFORCEMENT HOSE |
|
MS51811 Revision E:1987
|
TEE, TUBE, FLARELESS TYPE HYDRAULIC |
|
MS51534 Revision A:1979
|
REDUCER, TUBE, 37 DEGREE FLARED |
|
MIL-DTL-52525-44 Base Document:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE |
|
MIL-DTL-32480-6 Base Document:2014
|
FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, FLARELESS, MALE TO ORFS BULKHEAD |
|
MIL DTL 32372/8 : A
|
FITTING, ADAPTER, 45 DEGREE, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS FEMALE SWIVEL |
|
MIL DTL 32372/9 : A
|
FITTING, ADAPTER, 90 DEGREE, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS FEMALE SWIVEL |
|
AN 849 : 0013
|
NIPPLE, HOSE |
|
AN 838 : 0009
|
ELBOW, TUBE TO HOSE, 90 DEGREES |
|
MIL DTL 52525/11 : C
|
FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE |
|
MS51501 Revision C:2016
|
NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, SHORT |
|
MIL-DTL-52525-1 Revision D:2011
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT, SAE-J516 TYPE, FOR ASSEMBLY WITH SAE-J517, TYPE 100R2 HOSE |
|
MS51521 Revision C:2017
|
ELBOW, TUBE, 90 DEGREE, SWIVEL, 37 DEGREE FLARED |
|
MS51528 Revision B:1988
|
FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; ELBOW, TUBE TO BOSS, 45 DEGREE, O-RING, 37 DEGREE FLARED |
|
MS51816 Revision E:1987
|
ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC |
|
MIL-DTL-52525-43 Base Document:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT |
|
MIL DTL 32372/7 : A
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS FEMALE SWIVEL |
|
MIL DTL 32371/3 : 0
|
FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, 90 DEGREES ELBOW |
|
MIL DTL 32372/6 : A
|
FITTING, ADAPTER, 90 DEGREE, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS BULKHEAD |
|
MIL DTL 32371/6 : 0
|
FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, NIPPLE TUBE, REGULAR HEX, LONG |
|
A A 59440/7 : B
|
VALVE, SHUT-OFF, SCREW STEM, THREADED TYPE, 150 PSI, BRASS, WATER, OIL, AND GAS (WOG), NPTF-1 THREADS |
|
MIL-DTL-32372 Revision A:2016
|
FITTING, ADAPTER, HYDRAULIC AND PNEUMATIC, NPTF TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F |
|
AN 815 : 0010
|
UNION - FLARED TUBE |
|
MS51509 Revision D:2017
|
ELBOW, TUBE, 45 DEGREE, BULKHEAD, 37 DEGREE FLARED |
|
MS51524 Revision C:2017
|
TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED |
|
MS51502 Revision C:2016
|
NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, LONG |
|
MS39212K : 2018
|
SLEEVES, COMPRESSION, TUBE - HOSE FITTING - SAFETY SLEEVE TYPE |
|
MS51514 Revision D:2017
|
TEE, PIPE TO TUBE, FEMALE PIPE ON RUN 37 DEGREE FLARED |
|
MS51503 Revision C:2016
|
ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, 37 DEGREE FLARED |
|
SAE ARP 5794 : 2014
|
CENTRIFUGAL AIRCRAFT FUEL PUMP REQUIREMENTS, DESIGN AND TESTING, AEROSPACE STANDARD |
|
MIL DTL 8878 : L
|
TURNBUCKLES, POSITIVE SAFETYING, GENERAL SPECIFICATION FOR |
|
MIL DTL 62011/2 : 0
|
PUMP, FUEL, ELECTRICALLY-OPERATED: 24-VOLT DC, IN-TANK TYPE, SIDE-MOUNTED CONNECTOR, TYPE 2 |
|
MS51529 Revision B:1988
|
FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON BRANCH, O-RING |
|
MIL DTL 28748/15 : 0
|
CONNECTORS, ELECTRICAL, HEXAGONAL, RACK AND PANEL, MINIATURE, PLUG-RECEPTACLE, FEMALE SOLDER CUP OR PRINTED WIRING BOARD SOCKET CONTACTS, SIZE 20 |
|
AN 6204 : L
|
VALVE, HYDRAULIC BLEEDER |
|
AN846 Revision 9:2013
|
ELBOW, HOSE, 45 DEGREES |
|
MS51532 Revision B:1988
|
FITTING, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP, TUBE, 37 DEGREE FLARED |
|
MIL DTL 32372/2 : A
|
FITTING, ADAPTER, 45 DEGREE ELBOW, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS MALE |
|
MIL-DTL-32480-7 Base Document:2014
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, FLARELESS, MALE TO ORFS, FEMALE SWIVEL |
|
MS51520 Revision C:2017
|
NIPPLE, TUBE, BULKHEAD, 37 DEGREE FLARED |
|
MIL-STD-1500 Revision C:2007
|
CADMIUM-TITANIUM PLATING, LOW EMBRITTLEMENT, ELECTRODEPOSITION |
|
FF-S-200 Revision B:2004
|
SETSCREWS: HEXAGON SOCKET AND SPLINE SOCKET, HEADLESS |
|
MIL-PRF-23145 Revision C:2018
|
INFLATION ASSEMBLIES, LIFE PRESERVER |
|
MIL-DTL-83796-4 Revision C:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS WITH LOCKWIRE HOLE |
|
MIL-DTL-22992 Revision H:2015
|
CONNECTORS, PLUGS AND RECEPTACLES, ELECTRICAL, WATERPROOF, QUICK DISCONNECT, HEAVY DUTY TYPE, GENERAL SPECIFICATION FOR |
|
MIL-DTL-45912 Revision B:2013
|
BOLT, SELF-LOCKING, HEXAGON HEAD, STEEL |
|
MIL-DTL-52471-1 Revision C:2008
|
HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R1, SINGLE-WIRE BRAIDED REINFORCEMENT HOSE |
|
MIL DTL 52525/6 : C
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE |
|
SAE AS 4775 : 2017
|
AIRCRAFT MAINTENANCE JACKS - GENERAL REQUIREMENTS |
|
MIL DTL 83798/4 : D
|
FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARELESS, SWIVEL NUT, STRAIGHT |
|
MS51507 Revision D:2017
|
ELBOW, TUBE, 90 DEGREE, 37 DEGREE BULKHEAD, FLARED |
|
MS51508 Revision D:2017
|
ELBOW, PIPE TO TUBE, 45 DEGREE, MALE PIPE END, 37 DEGREE FLARED |
|
MS51516 Revision C:2017
|
TEE, BULKHEAD ON RUN 37 DEGREE FLARED |
|
MIL DTL 52525/36 : B
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE |
|
MIL DTL 32371/9 : 0
|
FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, TEE, BULKHEAD, SPHERICAL ON RUN |
|
MIL DTL 52525/15 : C
|
FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 90 DEGREES BENT TUBE |
|
MIL-DTL-3903 Revision F:2013
|
WIRE ROPE ASSEMBLIES, SINGLE LEG, (SLING TYPE) |
|
NASM 35206 : 2004
|
SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, CARBON STEEL, UNC-2A |
|
DSCC 84168 : F
|
HOLDER, ELECTRICAL CARD, CARD GUIDE-RETAINER, LEVER ACTUATED, METAL |
|
SAE AS 12500 : 2018
|
CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
|
SAE AS 50151 : 2015
|
CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR |
|
SAE AS 95234A : 2020
|
CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR |
|
15/30333168 DC : 0
|
BS EN 6118 - AEROSPACE SERIES - PROCESS SPECIFICATION - ALUMINIUM BASE PROTECTION FOR FASTENERS |
|
MIL-DTL-83513 Revision G:2008
|
CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR |
|
MIL-DTL-3607 Revision C:2009
|
CONNECTORS, COAXIAL, RADIOFREQUENCY, SERIES FOR PULSE, GENERAL SPECIFICATION FOR |
|
SAE AS5929C:2022
|
BEARING, ROLLER, NEEDLE, TRACK-ROLLER, CROWN RADIUSED OD, INTEGRAL STUD, TYPE VII, ANTI-FRICTION, CORROSION RESISTANT NITROGEN (CREN) STEEL AND CORROSION RESISTANT (CRES) STEEL, INCH |
|
MIL-DTL-14072 Revision F:2013
|
FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
|
MIL-DTL-45952 Revision A:2014
|
PIN, QUICK-RELEASE, DETENT GENERAL SPECIFICATION FOR |
|
MIL-DTL-13791-22 Revision A:2016
|
MACHINE-PAN HEAD SCREW, CROSS-RECESSED, CARBON STEEL, PROPER PROTECTED COATING PLATED, UNC-2A |
|
MIL-DTL-28748 Revision D:2001
|
CONNECTOR, PLUG AND RECEPTACLE, RECTANGULAR, RACK AND PANEL SOLDER TYPE AND CRIMP TYPE CONTACTS - GENERAL SPECIFICATION FOR |
|
MIL-DTL-45913 Revision D:2011
|
NUTS, SELF-LOCKING, HEXAGON, PREVAILING TORQUE |
|
FF-S-85 Revision D:2005
|
SCREW, CAP, SLOTTED AND HEXAGON HEAD |
|
MIL-DTL-5099 Revision C:2011
|
INDICATOR, CABIN AIR PRESSURE, 1-7/8 INCH DIAL, TYPE MA-1 |
|
AA-D-600 Revision D:2000
|
DOOR, VAULT, SECURITY |
|
MIL-DTL-12133 Revision E:2015
|
WASHER, SPRING TENSION, GENERAL SPECIFICATION FOR |
|
MIL-DTL-32460-8 Base Document:2013
|
FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
|
MIL-DTL-83454 Revision B:2016
|
TERMINALS, STUD, BLIND PLATE, FOR ELECTRICAL BONDING AND GROUNDING (NONINSULATED) |
|
SAE AS 4841 : 2017
|
FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION |
|
MIL-DTL-24308-26 Revision M:2015
|
CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, SCREW-LOCK ASSEMBLY, FEMALE |
|
MS 24700 : B
|
BUSHING, FIXED, CONNECTOR, RACK AND PANEL, MINIATURE |
|
MS 35759 : C
|
CUPS, GREASE, AUTOMATIC FEED |
|
AN841 Revision 7:2013
|
ADAPTER - HOSE TO FLARED TUBE |
|
SAE AS 5590 : 2013
|
CONNECTORS, FIBER OPTIC, ADVANCED, CIRCULAR OR RECTANGULAR, PLUG AND RECEPTACLE, ENVIRONMENT RESISTANT, REMOVABLE TERMINI/CONTACTS, GENERAL SPECIFICATION FOR |
|
MIL DTL 32464/7 : 0
|
MALE ADAPTER, 45 DEGREES ELBOW, BULKHEAD, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
MS39207 Revision H:2018
|
ELBOWS, TUBE - SAFETY SLEEVE COMPRESSION TYPE, 90 DEGREE |
|
10/30227763 DC : 0
|
BS EN 6114 - AEROSPACE SERIES - BOLT, COUNTERSUNK HEAD, SHORT THREAD - INCH SERIES |
|
MS 53075 : C
|
CAP, FUEL TANK TACTICAL VEHICLE, NON-VENTED |
|
MIL DTL 32464/2 : 0
|
MALE ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
MIL-DTL-45916 Revision C:2014
|
INSERT, SCREW THREAD - THREAD CUTTING AND THREAD FORMING |
|
SAE AS 81934 : 2016
|
BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING |
|
MIL-DTL-25427 Revision B:2009
|
COUPLING ASSEMBLY, HYDRAULIC, SELF SEALING, QUICK DISCONNECT, GENERAL SPECIFICATION FOR |
|
MIL DTL 32464/4 : 0
|
MALE ADAPTER, TEE, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 37 DEGREES SPHERICAL ON BRANCH, 1500-3000 PSI |
|
MS 25221 : G
|
GUARD, SWITCH, 2 OR 3 POSITION |
|
MIL-DTL-21097 Revision H:2017
|
CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD, GENERAL PURPOSE GENERAL SPECIFICATION FOR |
|
MIL DTL 28731 : F
|
CONNECTORS, ELECTRICAL, RECTANGULAR, REMOVABLE CONTACT, FORMED BLADE, FORK TYPE (FOR RACK AND PANEL AND OTHER APPLICATIONS) |
|
MIL-DTL-25955 Revision A:2004
|
CONNECTORS, ELECTRICAL, ENVIRONMENT RESISTING, MINIATURE, WITH SNAP-IN CONTACTS, OR HERMETICALLY SEALED WITH NON-REMOVABLE CONTACTS, GENERAL SPECIFICATION FOR |
|
MIL DTL 83798/5 : E
|
FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARELESS, SWIVEL NUT, 45 DEGREES |
|
MIL-HDBK-510 Revision A:2014
|
AEROSPACE FUELS CERTIFICATION |
|
AN 842 : 0013
|
ELBOW - PIPE TO HOSE, 90 DEGREES |
|
BS ISO 7169:2014
|
AEROSPACE - SEPARABLE TUBE FITTINGS FOR FLUID SYSTEMS, FOR 24 DEGREES CONES, FOR PRESSURES UP TO 3000 PSI OR 21000 KPA - PROCUREMENT SPECIFICATION, INCH/METRIC |
|
MIL PRF 1/1718 : A
|
ELECTRON TUBE, GAS SWITCHING TYPE 8922 |
|
MIL-DTL-81716 Revision A:2009
|
PACKING, PREFORMED, STRAIGHT THREADED TUBE FITTING BOSS, TYPE 2 HYDRAULIC (-65 DEGREES F TO +275 DEGREES F) |
|
MIL DTL 32464/8 : 0
|
MALE ADAPTER, 90 DEGREES ELBOW, BULKHEAD, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
AN844 Revision 13:2013
|
ELBOW - PIPE TO HOSE, 45 DEGREES |
|
MIL-DTL-24251-3 Revision D:2013
|
SHIELD, ELECTRON TUBE, HEAT DISSIPATING 7 AND 9 PIN, MINIATURE (SPLIT SHELL) |
|
A A 55538 : A
|
WATERPROOF SPARK PLUG LEAD AND CONDUIT ASSEMBLY (OTHER THAN AIRCRAFT) |
|
MIL-DTL-55302-38 Revision C:2007
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, ELECTRICAL, POLARIZED SHELL, MALE, .100 INCH CONTACT SPACING PIN TERMINAL |
|
MS 16842 : H
|
CLAMP, WIRE ROPE, SADDLED, SINGLE-GRIP, STEEL, TYPE 1 (MALLEABLE-IRON AND STEEL SADDLE) |
|
A-A-59440-3 Revision B:2012
|
COCK-VALVE, DRAIN, SPRING KEY, BRASS, 50 PSI, WATER, OIL, AND GAS (WOG), NPTF-1 THREADS |
|
AN 807 : 0007
|
ADAPTER, STRAIGHT, TUBE TO HOSE |
|
MIL-DTL-6001 Revision B:2013
|
FITTINGS; AIRCRAFT, SOLDER TYPE, TUBE |
|
MIL DTL 52525/13 : C
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE STRAIGHT |
|
MIL DTL 38999 : M
|
CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED OR BREECH COUPLING), ENVIRONMENT RESISTANT WITH CRIMP REMOVABLE CONTACTS OR HERMETICALLY SEALED WITH FIXED, SOLDERABLE CONTACTS, GENERAL SPECIFICATION FOR |
|
MIL-DTL-32464 Revision A:2017
|
FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR |
|
MIL DTL 32464/10 : 0
|
MALE ADAPTER, LONG, NIPPLE TUBE, HYDRAULIC AND PNEUMATIC TUBE, LONG HEX, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
DSCC 86092 : B
|
HOLDER, ELECTRICAL CARD, CARD GUIDE-RETAINER, LEVER ACTUATED, METAL, FOR COLD PLATE MOUNTING |
|
SAE AMS 8660 : 2018
|
SILICONE COMPOUND NATO CODE NUMBER S-736 |
|
MS 20760 : D
|
ADAPTER, STRAIGHT, FLANGE TO TUBE |
|
MIL DTL 32371 : 0
|
FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, SPHERICAL TO ORFS CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR |
|
SAE AS 6450 : 2012(S2019)
|
LUBRICANT APPLICATION, SOLID FILM, HEAT CURED, POTABLE WATER, HYDRAULIC, AND OTHER FLUID SYSTEMS |
|
MIL-DTL-32460-7 Base Document:2013
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
|
MS27611H : 2018
|
VALVE, HYDRAULIC BLEEDER, AIRCRAFT WHEEL BRAKE |
|
MIL-DTL-32460-5 Base Document:2013
|
FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
|
MIL DTL 32464/5 : 0
|
MALE ADAPTER, NIPPLE TUBE, HYDRAULIC AND PNEUMATIC, REGULAR HEX, 37 DEGREES SPHERICAL TO NPTF, 1500-3000 PSI |
|
SAE AIR 5919 : 2017
|
ALTERNATIVES TO CADMIUM PLATING |
|
SAE AS 81659 : 2017
|
CONNECTORS, ELECTRICAL, RECTANGULAR CRIMP CONTACTS, GENERAL SPECIFICATION FOR |
|
SAE AS 39901 : 2012
|
BEARINGS, ROLLER, NEEDLE, AIRFRAME, ANTIFRICTION, INCH |
|
SAE AS 45909 : 2015
|
STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR |
|
SAE AS 18280 : 2017
|
FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI |
|
NASM24694:2012
|
SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 100 DEGREES, STRUCTURAL, CROSS RECESSED, UNC-3A AND UNF-3A |
|
MIL DTL 5015 : H
|
CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE - GENERAL SPECIFICATION FOR |
|
MIL-DTL-45932 Revision A:2015
|
INSERT, SCREW THREAD, THIN WALL, LOCKED IN: GENERAL SPECIFICATION FOR |
|
SAE AS 82819 : 2013
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 300 CPM OSCILLATION (13 FPM), -65 TO +160 DEGREES F (-54 TO +71 DEGREES C), LINERS LESS THAN 0.015 INCHES |
|
MIL-DTL-52525-5 Revision D:2011
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT |
|
NASM 21059 : 2002
|
NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, LOW HEIGHT STEEL, 125 KSI FTU, 450 DEGREES F |
|
MIL DTL 52525/34 : B
|
FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT |
|
MIL DTL 52525/2 : C
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE |
|
DOD-W-63546 Revision A:1982
|
WASHER, KEY, METRIC GENERAL SPECIFICATION FOR |
|
MIL-DTL-18866 Revision J:2015
|
FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, GENERAL SPECIFICATION FOR |
|
MS39202 Revision G:2012
|
ELBOWS, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, 90 DEGREE, MALE PIPE END |
|
MS39201 Revision G:2012
|
NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE |
|
MS27769 Revision B:2011
|
PLUG, PIPE, COUNTERSUNK HEX HEAD |
|
MIL-DTL-26482 Revision H:2007
|
CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, QUICK DISCONNECT, ENVIRONMENT RESISTING, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR |
|
FF C 450 : G
|
CLAMPS, WIRE ROPE |
|
MIL HDBK 510-1 : A
|
AEROSPACE FUELS CERTIFICATION |
|
SAE AS 18280/1 : 2017
|
SLEEVE, BITE TYPE, 24 DEGREE CONE FLARELESS FITTING, 3000 PSI |
|
MIL-DTL-32460-1 Base Document:2013
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
|
MS20762 Revision D:2016
|
ELBOW, FLARED TUBE, FLANGED, SWIVEL, 90 DEGREES |
|
MIL-DTL-6193 Revision E:2017
|
JOINTS, UNIVERSAL, PLAIN, LIGHT AND HEAVY DUTY, GENERAL SPECIFICATION FOR |
|
MS 24361 : C
|
RING, SPLIT - TYPE MA-2, FLIGHT PRESSURE REFUELING, RECEPTION COUPLING |
|
MS 51868 : E
|
CLAMP, WIRE ROPE, DOUBLE SADDLED, DOUBLE-GRIP, STEEL, TYPE 3 |
|
MS39324 Revision C:2017
|
ADAPTER, 37 DEGREE, FLARE TO 'O' RING BOSS, 45 DEGREE FLARE |
|
MIL-DTL-70337 Revision A:2015
|
RING, RETAINING, ROUND SECTION |
|
MIL-DTL-8348 Revision K:2008
|
GAGE ASSEMBLIES, AIR PRESSURE, DIAL INDICATING CHUCK TYPE, SELF-CONTAINED |
|
MIL DTL 32373 : 0
|
PLUG, MACHINE THREAD, MAGNETIC: DRAIN |
|
MS51842 Revision E:2017
|
ELBOW, TUBE TO BOSS 45 DEGREE, O-RING, FLARELESS TYPE, HYDRAULIC |
|
MS 28760 : E
|
FITTING END, STRAIGHT, ATTACHABLE, HYDRAULIC AND PNEUMATIC, HIGH PRESSURE HOSE 3000 PSI, FLARED TUBE |
|
MIL-DTL-24251-4 Revision D:2013
|
RETAINER (BASE),AND ADAPTER, ELECTRON TUBE, HEAT DISSIPATING, 7 AND 9 PIN, MINIATURE |
|
MIL-DTL-6807 Revision F:2012
|
SWITCHES, ROTARY, SELECTOR POWER, GENERAL SPECIFICATION FOR |
|
MIL DTL 62011/1 : 0
|
PUMP, FUEL, ELECTRICALLY-OPERATED: 24-VOLT DC, IN-TANK TYPE, TOP-MOUNTED CONNECTOR, TYPE 1 |
|
10/30227764 DC : 0
|
BS EN 6115 - AEROSPACE SERIES - BOLT - PROTRUDING HEAD, SHORT THREAD - INCH SERIES |
|
MIL-DTL-32460-6 Base Document:2013
|
FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
|
MIL-DTL-32460 Revision A:2017
|
ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR |
|
MIL-DTL-83796-1 Revision C:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE |
|
MIL DTL 83798 : D
|
FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
|
A A 55563 : D
|
HOLDER, ELECTRICAL CARD, METAL CARD GUIDE, GENERAL REQUIREMENTS FOR |
|
MIL DTL 52525/38 : B
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE |
|
MIL-DTL-5675 Revision C:2005
|
SHACKLE: CABLE, AIRCRAFT |
|
MIL DTL 83796/13 : 0
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS, WITH LOCKWIRE HOLE |
|
MS51512 Revision D:2017
|
TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, 37 DEGREE FLARED |
|
MIL-DTL-52525-3 Revision D:2011
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, SHORT DROP |
|
MS51531 Revision B:1985
|
NUT, TUBE COUPLING, 37 DEGREE FLARED |
|
MS39322 Revision B:2017
|
ADAPTER: 37 DEGREE FLARE, FEMALE SWIVEL TO WELD SOCKET, 3/4 INCH TO 1 INCH |
|
MIL DTL 32464/11 : 0
|
MALE ADAPTER, BULKHEAD, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
MIL-DTL-55181 Revision F:2012
|
CONNECTORS, PLUG AND RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF), TYPE MW, GENERAL SPECIFICATION FOR |
|
MIL-DTL-27235 Revision B:2014
|
PIN, STRAIGHT, HEADED (CLEVIS PINS) |
|
MS51533 Revision A:1979
|
SLEEVE, COMPRESSION, TUBE FITTING, 37 DEGREE FLARED |
|
MS 35645 : G
|
CAP, FUEL TANK: TACTICAL VEHICLE, FORDING |
|
MS51526 Revision A:1979
|
ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED (LONG) |
|
MIL STD 870 : C
|
CADMIUM PLATING, LOW EMBRITTLEMENT, ELECTRODEPOSITION |
|
MIL-DTL-12520 Revision D:2005
|
CONNECTORS, PLUG AND RECEPTACLE (ELECTRICAL, WATERPROOF), AND ACCESSORIES; GENERAL SPECIFICATION FOR |
|
MIL DTL 2 : G
|
VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR |
|
FF C 450/1 : B
|
CLAMP, WIRE ROPE, DOUBLE-GRIP, STEEL, DOUBLE SADDLED, TYPE 2 |
|
MIL DTL 24308/25 : K
|
CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, SCREW-LOCK ASSEMBLY, MALE |
|
ISO 9216:2002
|
Aerospace — Nuts, hexagonal, slotted (castellated), for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated — Dimensions and masses |
|
MS 24120 : E
|
RING, COUPLING, ROTATING |
|
MS51530 Revision B:1988
|
FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON RUN, O-RING, 37 DEGREE FLARED |
|
MS 20756 : F
|
FLANGE, SWIVEL, RETAINING |
|
SAE AS 81819 : 2010
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, HIGH SPEED OSCILLATION -65 TO +160 DEGREES F GENERAL SPECIFICATION FOR |
|
MIL DTL 32372/11 : A
|
FITTING, ADAPTER, TEE, HYDRAULIC AND PNEUMATIC, NPTF MALE ON BRANCH TO ORFS MALE TO FEMALE RUN TO RUN |
|
MIL-DTL-52525-9 Revision C:2008
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT |
|
MIL-DTL-83796-3 Revision C:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS |
|
MS 20761 : C
|
ELBOW, FLARED TUBE, FLANGED, SWIVEL, 45 DEGREES |
|
MIL-DTL-55302-102 Revision E:2006
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, STRAIGHT-THRU, HERMAPHRODITIC CONTACT, CRIMP REMOVABLE, FOR PRINTED WIRING BOARDS (.100 INCH SPACING) |
|
MIL DTL 24211 : D
|
GASKETS, WAVEGUIDE FLANGE, GENERAL SPECIFICATION FOR |
|
AN 914 : 0011
|
ELBOW, PIPE, INTERNAL AND EXTERNAL THREAD, 90 DEGREES |
|
MIL-DTL-25308 Revision C:2010
|
GAGE, PRESSURE, DIAL INDICATING, HYDRAULIC, TYPE ME-1 |
|
SAE AS 19692 : 2016
|
AEROSPACE - MILITARY TYPE VARIABLE DELIVERY, PRESSURE COMPENSATED HYDRAULIC PUMP |
|
SAE AS 85049 : 2016
|
CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR |
|
SAE AS 8914 : 2016
|
BEARING, ROLLER, SELF-ALIGNING, AIRFRAME, ANTIFRICTION |
|
SAE AS 81703 : 2012
|
CONNECTORS, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING |
|
SAE AS 4842 : 2016
|
FITTINGS AND BOSSES, PIPE THREADED, FLUID CONNECTION |
|
NASA KSC DE 512-SM : 2012
|
FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
|
MIL-DTL-13791 Revision H:2015
|
DISTRIBUTOR, IGNITION SYSTEM: INTEGRAL COIL, WATERPROOF 24 VOLT |
|
MIL-DTL-52525-17 Revision C:2008
|
FITTINGS, CLAMP-HALVES, FLANGE TO PORT, FOR 4-BOLT SPLIT-FLANGE |
|
MIL-DTL-45910 Revision D:2015
|
INSERT, SCREW THREAD-LOCKED IN AND RING LOCKED, SERRATED GENERAL SPECIFICATION FOR |
|
DSCC 88052 : D
|
HOLDER, ELECTRICAL CARD, CARD GUIDE-RETAINER, SCREW ACTUATED, METAL |
|
MIL-DTL-28840 Revision D:2013
|
CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLASS D, GENERAL SPECIFICATION FOR |
|
MIL-DTL-52525-40 Revision B:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT |
|
MIL DTL 52525/31 : B
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL |
|
MIL DTL 22442/32 : C
|
CABLE ASSEMBLY, AIRCRAFT AUDIO, ASSOCIATED PARTS |
|
MIL-DTL-21248 Revision D:2015
|
RING, RETAINING (TAPERED AND REDUCED SECTION TYPE) |
|
MIL DTL 52525 : F
|
FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR |
|
MIL-DTL-55302-42 Revision C:2007
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, ELECTRICAL, POLARIZED SHELL, FEMALE, .100 INCH CONTACT SPACING, REMOVABLE CRIMP CONTACTS |
|
I.S. EN 6101:2016
|
AEROSPACE SERIES - RIVET, 100 DEGREES MEDIUM FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES |
|
MIL-DTL-32480-2 Base Document:2014
|
FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, FLARELESS MALE TO ORFS MALE |
|
MIL DTL 83723 : H
|
CONNECTORS, ELECTRICAL, CIRCULAR, ENVIRONMENT RESISTING AND HERMETICALLY SEALED, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR |
|
MIL-DTL-12520-11 Revision B:2005
|
CONNECTORS, RECEPTACLE, ELECTRICAL WATERPROOF (SHELL SIZE 26, FEMALE INSERTS) |
|
MIL-DTL-24308 Revision G:2009
|
CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR |
|
MS 28761 : C
|
FITTING END, STRAIGHT, ATTACHABLE, HYDRAULIC, HIGH PRESSURE HOSE 3000 PSI, FLARELESS TUBE |
|
MIL-DTL-32480-8 Base Document:2014
|
FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, FLARELESS, MALE TO ORFS, FEMALE SWIVEL |
|
MIL-DTL-32460-4 Base Document:2013
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
|
NASM 20613 : 2005
|
RIVET, SOLID, UNIVERSAL HEAD, STEEL, CARBON AND STEEL, CORROSION-RESISTANT |
|
MS51522 Revision C:2017
|
ELBOW, TUBE, 45 DEGREE SWIVEL, 37 DEGREE FLARED |
|
SAE AS 4941 : 2015
|
AEROSPACE - GENERAL REQUIREMENTS FOR COMMERCIAL AIRCRAFT HYDRAULIC COMPONENTS |
|
MIL DTL 32372/5 : A
|
FITTING, ADAPTER, 45 DEGREE, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS BULKHEAD |
|
MS 25224 : H
|
GUARD, SWITCH, 2 POSITION |
|
MIL-DTL-45918 Revision A:2009
|
CLEVISES AND CONNECTORS (ROD END) |
|
MIL DTL 32464/3 : 0
|
MALE ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
MIL-DTL-24251-6 Revision E:2013
|
SHIELD, ELECTRON TUBE, HEAT DISSIPATING, 7 AND 9 PIN, MINIATURE (RETROFIT TYPE ONLY) |
|
MIL-DTL-27599 Revision E:2016
|
CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTANT, SOLDER CONTACTS, GENERAL SPECIFICATION FOR |
|
MIL DTL 55422 : B
|
CLIP, ELECTRICAL, GRID AND ANODE, GENERAL SPECIFICATION FOR |
|
MIL DTL 32372/10 : A
|
FITTING, ADAPTER, TEE, HYDRAULIC AND PNEUMATIC, NPTF MALE ON BRANCH TO ORFS FEMALE RUN TO RUN |
|
MS75028 Revision K:2005
|
SWITCH, TOGGLE, ONE POLE, UNSEALED |
|
ISO 9217:2002
|
Aerospace — Washers, chamfered, with counterbore, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated — Dimensions and masses |
|
16/30354035 DC : 0
|
BS EN 4854-2 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, WIDE SERIES - DIMENSIONS AND LOADS |
|
MS 25034 : K
|
GUARD, SWITCH, 3 POSITION |
|
MIL STD 171 : F
|
FINISHING OF METAL AND WOOD SURFACES |
|
MIL-PRF-29602 Revision A:2005
|
CLEANING COMPOUNDS, PARTS WASHER AND SPRAY CABINET |
|
MIL DTL 5070 : F
|
ADAPTER, HOSE TO TUBE, PIPE AND FLANGE, REUSABLE - HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR |
|
MIL-DTL-32480-3 Base Document:2014
|
FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, FLARELESS MALE TO ORFS MALE |
|
MS 27752 : D
|
GUARD, SWITCH, 3 POSITION |
|
MS24417 Revision K:2005
|
GUARD, SWITCH, 2 OR 3 POSITION |
|
MIL-DTL-52471-8 Revision B:2008
|
HOSE ASSEMBLIES, RUBBER: HYDRAULIC PRESSURE-TYPE; TYPE 100RE |
|
SAE AS 5528 : 2016
|
LUBRICANT APPLICATION, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
|
MIL-DTL-8789 Revision G:2015
|
FITTING END, ATTACHABLE, HYDRAULIC, HIGH PRESSURE (3,000 PSI), GENERAL SPECIFICATION FOR |
|
MIL-DTL-32460-9 Base Document:2013
|
FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
|
AN 848 : 0013
|
ELBOW, HOSE, 90 DEGREES |
|
AN 840 : 0011
|
ADAPTER, STRAIGHT, PIPE TO HOSE |
|
MIL DTL 32464/9 : 0
|
MALE ADAPTER, TEE, BULKHEAD, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 37 DEGREES SPHERICAL ON RUN, 1500-3000 PSI |
|
MS51818 Revision E:1987
|
TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, FLARELESS TYPE, HYDRAULIC |
|
AN 839 : 0009
|
ELBOW, TUBE TO HOSE, 45 DEGREES |
|
MIL DTL 32371/1 : 0
|
FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, STRAIGHT |
|
MIL-DTL-52525-16 Revision D:2008
|
FITTINGS, CLAMP-HALVES, FOR 4-BOLT SPLIT-FLANGE, SAE-J518, TYPE SPLIT-FLANGE CLAMP (SFC) |
|
MIL-DTL-52471-2 Revision C:2008
|
HOSE ASSEMBLIES, RUBBER: HYDRAULIC PRESSURE-TYPE; TYPE 100R2, DOUBLE-WIRE BRAIDED REINFORCEMENT HOSE |
|
MIL DTL 52525/37 : B
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT |
|
MIL DTL 52471/3 : C
|
HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100RE, FOUR-WIRE BRAIDED REINFORCEMENT OR MULTIPLE WIRE BRAIDED STEEL WIRE REINFORCED HOSE |
|
MIL DTL 21617/29 : 0
|
CONNECTOR, RECEPTACLE ELECTRICAL, RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE, BACK SHELLS |
|
MS51841 Revision E:2017
|
TEE, TUBE TO BOSS, BOSS ON BENCH, O-RING, FLARELESS TYPE, HYDRAULIC |
|
SAE ARP 1070E : 2019
|
DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY |
|
SAE AS 81582 : 2017
|
CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR |
|
SAE ARP 1070 : 2014
|
DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY |
|
SAE AMS 3167 : 2005
|
SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS |
|
ISO 7169:2014
|
Aerospace Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa Procurement specification, inch/metric |
|
PREN 6101 : 200P2
|
AEROSPACE SERIES - RIVET, 100 DEGREES MEDIUM FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES |
|
BS EN 6101:2016
|
Aerospace series. Rivet, 100° medium flush head, close tolerance. Inch series |
|
FF-S-1362:2014
|
STUD, PLAIN, GENERAL PURPOSE |
|
MIL-DTL-9398 Revision D:2007
|
GENERATOR, TACHOMETER, TWO-POLE, HIGH TEMPERATURE, AIRCRAFT |
|
EN 6101:2016
|
Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series |
|
MS51517 Revision C:2017
|
CROSS, TUBE, 37 DEGREE FLARED |
|
MIL DTL 32372/1 : A
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS MALE |
|
MIL DTL 28748/16 : 0
|
CONNECTORS, ELECTRICAL, HEXAGONAL, RACK AND PANEL, MINIATURE, PLUG-RECEPTACLE, FEMALE SOLDER CUP PIN CONTACTS, SIZE 20 |
|
MIL-DTL-32480-9 Base Document:2014
|
FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, FLARELESS, MALE TO ORFS, FEMALE SWIVEL |
|
MIL DTL 32371/5 : 0
|
FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, UNION CROSS, SPHERICAL ON BRANCH |
|
MIL DTL 32371/7 : 0
|
FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, 45 DEGREES ELBOW, BULKHEAD |
|
MS51500 Revision F:2017
|
FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ADAPTER, STRAIGHT, PIPE TO TUBE, MALE END, 37 DEGREE FLARED |
|
MIL DTL 3992 : F
|
HOSE AND HOSE ASSEMBLY, RUBBER, AIR AND VACUUM BRAKE, SYSTEMS |
|
MS51505 Revision C:2016
|
ELBOW, TUBE, 90 DEGREE, 37 DEGREE FLARED |
|
MIL-DTL-25867 Revision D:2006
|
GAGE, PRESSURE, DIAL INDICATING, PNEUMATIC |
|
DSCC 85020 : G
|
HOLDER, ELECTRICAL CARD, CARD GUIDE, METAL, WITHOUT FLARED ENTRY |
|
MS27612 Revision M:2013
|
ADAPTER, HYDRAULIC BLEEDER VALVE, AIRCRAFT WHEEL BRAKE |
|
MIL-DTL-32480-4 Base Document:2014
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, FLARELESS MALE TO ORFS BULKHEAD |
|
MIL-DTL-52525-45 Base Document:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE |
|
DSCC 85021 : C
|
HOLDER, ELECTRICAL CARD, CARD GUIDE, METAL, WITH FLARED ENTRY |
|
MS51513 Revision D:2017
|
TEE, PIPE TO TUBE, FEMALE PIPE ON BRANCH, 37 DEGREE FLARED |
|
MIL DTL 52525/8 : C
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, LONG DROP |
|
MIL DTL 32371/2 : 0
|
FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, 45 DEGREES ELBOW |
|
MS51506 Revision E:2017
|
FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ELBOW, PIPE TO TUBE, 90 DEGREE, FEMALE PIPE END, 37 DEGREE FLARED |
|
MS51527 Revision D:2000
|
FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; ELBOW, TUBE TO BOSS, 90 DEGREE, O-RING, 37 DEGREE FLARED |
|
MIL-DTL-52525-39 Revision B:2008
|
FITTINGS, HOSE, SCREW-ON TO 37DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE |
|
MS 39325 : C
|
HOSE ASSEMBLIES; AIR (TYPE 1) AND VACUUM (TYPE 2) BRAKE 3/8 INCH NOMINAL DIAMETER |
|
MS51815 Revision F:1987
|
ELBOW PIPE TO TUBE 90 DEGREE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC |
|
MS39323 Revision C:2017
|
FITTING, TUBE, REDUCER: 37 DEGREE FLARE |
|
MS51523 Revision C:2017
|
TEE, TUBE TO SWIVEL, SWIVEL ON RUN, 37 DEGREE FLARED |
|
MIL DTL 52525/14 : C
|
FITTINGS, HOSE CRIMP TYPE, SPLIT-FLANGE 45 DEGREES BENT |
|
MIL DTL 83796/12 : 0
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS |
|
MIL-DTL-21617 Revision B:2012
|
CONNECTORS, PLUG AND RECEPTACLE, ELECTRICAL, RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE, GENERAL SPECIFICATION FOR |
|
MS51511 Revision D:2017
|
TEE, PIPE TO TUBE, MALE PIPE ON RUN, 37 DEGREE FLARED |
|
MS51812 Revision F:1987
|
NIPPLE, TUBE, BULKHEAD, FLARELESS TYPE HYDRAULIC |
|
MS51515 Revision D:2017
|
TEE, TUBE, BULKHEAD ON BRANCH, 37 DEGREE FLARED |
|
MIL-DTL-52525-42 Revision B:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE 90 DEGREES BENT |
|
MIL-DTL-52525-41 Revision A:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE |
|
MS51817 Revision E:1987
|
ELBOW, PIPE TO TUBE, 45 DEGREE MALE PIPE END, FLARELESS TYPE, HYDRAULIC |
|
MS51820 Revision E:1987
|
ELBOW, TUBE, 90 DEGREE, FLARELESS TYPE, HYDRAULIC |
|
MS51518 Revision C:2017
|
PLUG, MACHINE THREAD, 37 DEGREE FLARED |
|
MS51813 Revision E:1987
|
ELBOW, PIPE TO TUBE 90 DEGREE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC |
|
SAE AS 4875 : 2016
|
FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION |
|
MIL DTL 83798/2 : D
|
FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARED, SWIVEL NUT, 45 DEGREES |
|
MIL-DTL-52525-12 Revision D:2011
|
FITTINGS, HOSE, SCREW ON TO SPLIT-FLANGE 90 DEGREES BENT |
|
MIL-DTL-32460-2 Base Document:2013
|
FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
|
MIL-DTL-52525-33 Revision A:2008
|
FITTINGS, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPRIAL-WRAP REINFORCEMENT HOSE |
|
SAE AS 7949 : 2004
|
BEARINGS, BALL, AIRFRAME, ANTIFRICTION, GENERAL STANDARD |
|
MIL-DTL-24251-5 Revision D:2013
|
SHIELD, ELECTRON TUBE, HEAT DISSIPATING, 7 AND 9 PIN, MINIATURE (OPEN SIDES) |
|
MIL-DTL-3390 Revision H:2011
|
RINGS, DEE |
|
MS 16843 : H
|
CLAMP, WIRE ROPE (DOUBLE GRIP), THREADED, STEEL, TYPE 4 |
|
MS25214 Revision G:2010
|
GUARD, SWITCH, 3 POSITION |
|
SAE AS 81511 : 2016
|
CONNECTORS, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING AND ACCESSORIES, GENERAL SPECIFICATION FOR |
|
MIL-DTL-52525-4 Revision D:2011
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, LONG DROP |
|
MIL DTL 62011 : E
|
PUMP, FUEL, ELECTRICALLY-OPERATED: 24-VOLT DC, IN-TANK TYPE, GENERAL SPECIFICATION FOR |
|
MIL DTL 83798/6 : D
|
FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARELESS, SWIVEL NUT, 90 DEGREES |
|
MIL DTL 25677 : G
|
ADAPTER, CAP, AND NOZZLE, PRESSURE LUBRICATING OIL SERVICING, AIRCRAFT, GENERAL SPECIFICATION FOR |
|
MIL-DTL-83413-6 Revision C:2008
|
CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: RECEPTACLES, TWO PIECE, WITH INSERTS AND HOUSINGS |
|
MIL DTL 32372/3 : A
|
FITTING, ADAPTER, 90 DEGREE ELBOW, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS MALE |
|
MIL-PRF-32587:2018
|
REMOVER, PAINT, HAP-FREE, NEUTRAL |
|
MS51504 Revision C:2016
|
ELBOW, PIPE TO TUBE, 90 DEGREE MALE PIPE END, 37 DEGREE FLARED |
|
MS25223 Revision H:2005
|
GUARD, SWITCH, 3 POSITION |
|
MIL-DTL-25866 Revision C:2010
|
LIGHT, EMERGENCY EXIT, AIRCRAFT LEU-1/A |
|
MIL-DTL-5003 Revision E:2010
|
FLOODLIGHT SET, ELECTRIC, TRIPOD-MOUNTED, FOUR 150-WATT FLOODLIGHTS |
|
MS25452 Revision H:2010
|
GUARD, SWITCH, 2 POSITION, LOCK |
|
MIL-DTL-83796-2 Revision C:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE |
|
MIL DTL 83798/1 : D
|
FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARED, SWIVEL NUT, STRAIGHT |
|
MIL-DTL-3643 Revision B:2003
|
CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES HN, AND ASSOCIATED FITTINGS, GENERAL SPECIFICATION FOR |
|
MIL DTL 83798/3 : D
|
FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARED, SWIVEL NUT, 90 DEGREES |
|
MIL-DTL-12520-10 Revision B:2005
|
CONNECTORS, RECEPTACLE, ELECTRICAL WATERPROOF (SHELL SIZE 26, MALE INSERTS) |
|
SAE AS 4843 : 2016
|
FITTINGS, BEADED, FLUID CONNECTION |
|
SAE AS 83819 : 2013
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 1400 CPM (15 FPM), OSCILLATION, -65 TO +160 DEGREES F (-54 TO +71 DEGREES C) |
|
SAE AIR 4789 : 2016
|
AEROSPACE INFORMATION REPORT ON EVALUATING CORROSION TESTING OF ELECTRICAL CONNECTORS AND ACCESSORIES FOR THE PURPOSE OF QUALIFICATION |
|
NASM 21083 : 2004
|
NUT, SELF-LOCKING, HEXAGON, NON-METALLIC INSERT, LOW HEIGHT, 250 DEGREES F |
|
MIL STD 1568 : D
|
MATERIALS AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN AEROSPACE WEAPONS SYSTEMS |
|
SAE AMS 2451/4D : 2017
|
PLATING, BRUSH, CADMIUM CORROSION PROTECTIVE, LOW HYDROGEN EMBRITTLEMENT |
|
SAE AS 81820 : 2014
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION |