|
MIL-DTL-32460-3 Base Document:2013
|
FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
|
MIL-PRF-24236-11 Revision J:2007
|
SWITCHES, THERMOSTATIC, (BIMETALLIC), TYPE 1, HERMETICALLY SEALED, SINGLE POLE, SINGLE THROW (SPST), 1 AMPERE |
|
MIL PRF 7891 : F
|
FILLER VALVE, AIRCRAFT OXYGEN |
|
11/30250205 DC : 0
|
BS EN 6138 - AEROSPACE SERIES - CAP, PROTECTIVE, NON METALLIC FOR FITTING ENDS <= 3000 PSI HYDRAULIC SYSTEMS |
|
MS27057 Revision E:2013
|
Adapter Assembly, Flared, 90 Degrees Elbow, Tube to Hose - with Swivel Nut |
|
MIL-DTL-83796-10 Revision A:2014
|
HOSE ASSEMBLY, RUBBER, LIGHT WEIGHT, INTERNAL SUPPORT COIL, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE |
|
MS27086 Revision D:2013
|
Elbow, Nipple End, Flared, Tube to Hose - 90 Degrees Swivel Nut |
|
MS27060 Revision E:2013
|
Adapter Assembly, Flared, 90 Degrees Forged Elbow, Tube to Hose-with Swivel Nut |
|
MIL-DTL-83796-11 Revision A:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE |
|
MS27087 Revision D:2013
|
Elbow, Nipple End, Flared, Tube to Hose - 45 Degrees Swivel Nut |
|
MS28052 Revision C:2011
|
VALVE, CHECK, PRESSURE GAGE LINES BLEEDER AND FILLER |
|
MIL-DTL-32434-3 Base Document:2013
|
Hose Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flare-To-Flange |
|
AN815 Revision 10:2015
|
UNION - FLARED TUBE |
|
SAE AMS P 5510 : 2013
|
O-RING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE 1 HYDRAULIC (-65 TO 160 DEGREES F) |
|
SAE AIR 5426 : 2013
|
FITTING AND FITTING ASSEMBLY SELECTION, INSTALLATION, INSPECTION AND MAINTENANCE OF |
|
MS20761 Revision C:2016
|
ELBOW, FLARED TUBE, FLANGED, SWIVEL, 45 DEGREES |
|
MIL-DTL-27272 Revision D:2015
|
Fittings, Polytetrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification for |
|
MIL-DTL-8790 Revision F:2007
|
HOSE ASSEMBLIES, RUBBER, HYDRAULIC, HIGH PRESSURE 3,000 PSI, OPERATING TEMPERATURE RANGE -65 DEGREES F TO +275 DEGREES F, FIELD ATTACHABLE |
|
SAE ARP4943A:2022
|
Ground Support Equipment Hydraulic Systems, Design and Installation, Recommended Practices forARP4943A |
|
MIL-DTL-83796 Revision B:2008
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
|
MIL-DTL-32330 Revision A:2015
|
Hose Assembly, Conductive Polytetrafluoroethylene Tube, Smooth Bore, Flared and Flareless, Tube to Hose, with Swivel Nut |
|
MIL-DTL-24694 Revision A:2011
|
VALVE, HYDRAULIC RELIEF, 1.5 - 35 BARS (22 - 500 POUNDS PER SQUARE INCH) CARTRIDGE TYPE, GENERAL SPECIFICATION FOR (METRIC) |
|
MS28884 Revision F:2009
|
VALVE, FUEL CHECK, LOW PRESSURE, FLARED TUBE CONNECTION |
|
MS21430 Revision B:2009
|
VALVE, CHECK, FUEL AND AIR, POPPET TYPE, ZERO, LEAK |
|
MIL-DTL-25579 Revision H:2014
|
Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for |
|
MIL-DTL-87223 Revision A:2008
|
VALVES, PRESSURE, ANTI-G SUIT, MXU-804/A AND MXU-805/A |
|
MS27618 Revision C:2018
|
Adapter Assembly, Flared, 90 Degrees Elbow, Tube to Hose - with Swivel Nut |
|
MIL-DTL-28827-1 Revision C:2011
|
SWITCH, THERMOSTATIC (VOLATILE LIQUID), HERMETIC SEALED, SINGLE POLE DOUBLE THROW (SPDT), MEDIUM RESPONSE TIME |
|
MIL-DTL-26633 Revision F:2014
|
HOSE ASSEMBLY, NONCONDUCTIVE, POLYTETRAFLUOROETHYLENE, OXYGEN |
|
MIL-DTL-32460-8 Base Document:2013
|
FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
|
BS EN 6138:2017
|
AEROSPACE SERIES - CAP, PROTECTIVE, NON-METALLIC FOR FITTING ENDS <= 3000 PSI HYDRAULIC SYSTEMS |
|
AN841 Revision 7:2013
|
ADAPTER - HOSE TO FLARED TUBE |
|
MIL-DTL-83796-6 Revision D:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLANGE, WITH LOCKWIRE HOLE |
|
A-A-59935 Base Document:2013
|
Conical Seal, Crush, 37 Degree Flared Tube Fitting, General Requirements for |
|
MIL-PRF-25675 Revision C:1997
|
VALVES, CHECK, MINIATURE, HYDRAULIC, AIRCRAFT AND MISSILE |
|
MS27621 Revision C:2018
|
Elbow Sub Assembly, Flared, 90 Degree, Swivel Nut |
|
AN6027 Revision 5:2013
|
COUPLING HALF, QUICK DISCONNECT |
|
MIL-DTL-83796-14 Revision A:2010
|
Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flare to Flange |
|
MS27619 Revision C:2018
|
Nipple Sub Assembly, Flared, Straight - with Swivel Nut |
|
MS27055 Revision E:2013
|
Adapter Assembly, Flared, 45 Degrees Elbow, Tube to Hose - with Swivel Nut |
|
MIL-DTL-5513 Revision D:2012
|
SWIVEL JOINT, HYDRAULIC |
|
MS27061 Revision D:2013
|
Nipple Subassembly, Flared, Straight - with Swivel Nut |
|
MS27628 Revision B:2009
|
ELBOW, FLARED, TUBE TO HOSE, 45 DEGREES, SWIVEL NUT |
|
MIL-DTL-32330-1 Revision A:2015
|
Hose Assembly, Conductive Polytetrafluoroethylene Tube, Flared, Tube to Hose with Swivel Nut (No S/S Document) |
|
SAE AS 4875 : 2016
|
FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION |
|
MS27627 Revision B:2009
|
ELBOW, FLARED, TUBE TO HOSE, 90 DEGREES, SWIVEL NUT |
|
MIL-DTL-83798-5 Revision E:2017
|
Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 45 Degrees |
|
MIL-DTL-83296 Revision B:2009
|
Fittings, Corrosion Resistant Steel, High Temperature, High Pressure (3000 PSI), Hydraulic and Pneumatic, General Specification for |
|
MS27067 Revision D:2013
|
Elbow Subassembly, Flared, 45 Degrees Forged, Swivel Nut |
|
MS8002 Revision E:2016
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, REUSABLE FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLANGE |
|
MIL-PRF-38170 Revision H:2000
|
TANK, MOBILE STORAGE, LIQUID OXYGEN TMU-27/M |
|
MIL-DTL-32464 Revision A:2017
|
FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR |
|
MS20760 Revision D:2013
|
ADAPTER, STRAIGHT, FLANGE TO TUBE |
|
MIL-DTL-32371 Base Document:2012
|
Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for |
|
MIL-DTL-32460-5 Base Document:2013
|
FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
|
MIL-DTL-32460-7 Base Document:2013
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
|
SAE AS 4623 : 2016
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3,000 PSI, 275 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS |
|
SAE AS 38390 : 2013
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 4000 PSI, 160 DEGREES F, COVERED PNEUMATIC |
|
SAE AS 620 : 2012
|
HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT |
|
SAE ARP 24 : 2013
|
DETERMINATION OF HYDRAULIC PRESSURE DROP |
|
SAE AS 1975 : 2016
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3000/4000 PSI, 275 DEGREES F, STANDARD DUTY, HYDRAULIC, AIRCRAFT SYSTEMS |
|
SAE AS 683 : 2012
|
INSTALLATION PROCEDURES AND TORQUES FOR FLUID CONNECTIONS |
|
SAE AS 614 : 2017
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 4000 PSI, 400 DEGREES F, HEAVY DUTY, HYDRAULIC AND PNEUMATIC |
|
MIL-DTL-83796-18 Revision A:2010
|
Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flange to Flange |
|
MIL-DTL-87255 Revision A:2008
|
VALVES, PRESSURE, ANTI-G SUIT, HIGH FLOW |
|
MS27075 Revision D:2013
|
NIPPLE, FLARED, TUBE TO HOSE - SWIVEL NUT |
|
MS8000 Revision E:2016
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, REUSABLE FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLARE |
|
MIL-DTL-83796-15 Revision A:2010
|
Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flare to Flange, with Lockwire Hole |
|
MS21953 Revision C:2015
|
BODY, CLUSTER FITTING, ONE-WAY, FLARE |
|
MS21955 Revision C:2009
|
BODY, CLUSTER FITTING, TWO-WAY, 180 DEGREES, FLARE |
|
AN774 Revision 8:2011
|
BOLT - FLARED TUBE FITTING END UNIVERSAL |
|
MIL-DTL-19068 Revision B:2006
|
VALVES, SHUTTLE, HYDRAULIC, AIRCRAFT, TYPE 2 SYSTEMS |
|
MS20762 Revision D:2016
|
ELBOW, FLARED TUBE, FLANGED, SWIVEL, 90 DEGREES |
|
MS27068 Revision D:2013
|
Elbow Subassembly, Flared, 90 Degrees Forged, Swivel Nut |
|
MIL-DTL-32460-1 Base Document:2013
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
|
MIL-PRF-27720 Revision G:2009
|
TANK, STORAGE, LIQUID OXYGEN/LIQUID NITROGEN, TMU-24/E |
|
MS27617 Revision C:2018
|
Adapter Assembly, Flared, 45 Degrees Elbow, Tube to Hose - with Swivel Nut |
|
MIL-DTL-7891 Revision G:2008
|
FILLER VALVE, AIRCRAFT OXYGEN |
|
MIL-DTL-32460-6 Base Document:2013
|
FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
|
MIL-DTL-83798 Revision D:2008
|
FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
|
MS27626 Revision B:2009
|
NIPPLE, FLARED, TUBE TO HOSE-SWIVEL NUT |
|
SAE AS 4841 : 2017
|
FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION |
|
MS21954 Revision C:2015
|
BODY, CLUSTER FITTING, TWO-WAY, 90 DEGREE, FLARE |
|
MIL-DTL-32460 Revision A:2017
|
ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR |
|
AN775 Revision 14:2011
|
BOLT - FLUID PASSAGE |
|
MIL-DTL-83796-5 Revision D:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLANGE |
|
MIL-DTL-83796-1 Revision C:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE |
|
MS27065 Revision F:2013
|
Elbow Subassembly, Flared, 90 Degrees, Swivel Nut |
|
MIL-PRF-7908 Revision E:2009
|
VALVES, CHECK, AIRCRAFT LOW PRESSURE OXYGEN SYSTEMS |
|
SAE AS 4875/1 : 2016
|
FITTINGS, STRAIGHT THREAD BOSS OR FLANGED 37 DEGREES FLARED, FLUID CONNECTION |
|
MS27616 Revision C:2018
|
Adapter Assembly, Flared, Straight, Tube to Hose - with Swivel Nut |
|
SAE AS 1424 : 2014
|
HOSE ASSEMBLIES, METAL, MEDIUM PRESSURE, HIGH TEMPERATURE |
|
SAE AS 4842/1 : 2016
|
FITTINGS, 37 DEGREES FLARED TO PIPE THREADED, FLUID CONNECTION |
|
SAE AS 5420 : 2017
|
HOSE ASSEMBLY, HEATED, 125 PSIG, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION |
|
SAE AS 18280 SUP1 : 2007
|
FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI (SUPPLEMENT 1) |
|
NASA SSTD 8070 0126 : 2014
|
TUBING SYSTEMS FOR FACILITY SYSTEMS, SPECIAL TEST EQUIPMENT, AND AEROSPACE HARDWARE |
|
NASA SSTD 8070 0069 : 2008
|
LOW PRESSURE VACUUM JACKETED PIPE |
|
MIL-DTL-32434 Base Document:2013
|
Hose Assembly, Polytetrafluoroethylene, Convoluted, High Temperature, Medium Pressure, General Specification for |
|
MIL-DTL-32460-4 Base Document:2013
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
|
SAE AS 4073 : 2013(R2018)
|
AIR CYCLE AIR CONDITIONING SYSTEMS FOR MILITARY AIR VEHICLES |
|
MS27620 Revision C:2018
|
Elbow Sub Assembly, Flared, 45 Degrees, Swivel Nut |
|
MIL-DTL-8789 Revision G:2015
|
FITTING END, ATTACHABLE, HYDRAULIC, HIGH PRESSURE (3,000 PSI), GENERAL SPECIFICATION FOR |
|
MIL-DTL-32460-9 Base Document:2013
|
FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
|
MIL-DTL-26666 Revision G:2006
|
Hose Assembly, Pneumatic, High Pressure |
|
MS27063 Revision F:2013
|
Elbow Subassembly, Flared, 45 Degrees, Swivel Nut |
|
MS27053 Revision E:2013
|
Adapter Assembly, Flared, Straight, Tube to Hose - with Swivel Nut |
|
PREN 6138 : DRAFT 2014 CORR 14
|
AEROSPACE SERIES - CAPS, PROTECTIVE, NON-METALLIC FOR FLARED AND FLARELESS FITTING ENDS, FOR FLUID SYSTEMS WITH <= 3000 PSI (21000 KPA) WORKING PRESSURE |
|
SAE AS 1339 : 2017
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC |
|
SAE AS 1227 : 2013
|
HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, LOW PRESSURE, UP TO 400 DEGREES F, AIRCRAFT |
|
SAE AS 4897 : 1994
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), LOW PRESSURE, 450 DEGREES F AND FIREPROOF, PROCUREMENT SPECIFICATION FOR |
|
EN 6138:2017
|
Aerospace series - Cap, protective, non-metallic for fitting ends ≤ 3 000 PSI hydraulic systems |
|
SAE AS 4468 G : 2017
|
HOSE ASSEMBLY, 125 PSI, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION |
|
SAE AS 604 : 2012
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, HEAVYWEIGHT, HYDRAULIC |
|
MIL-DTL-83798-2 Revision D:2017
|
Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 45 Degrees |
|
MS21949 Revision C:2014
|
BOLT-CLUSTER FITTING, SINGLE PORT-FLARE |
|
MIL-DTL-32460-2 Base Document:2013
|
FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
|
SAE ARP 5555 : 2016
|
RECOMMENDATIONS FOR INSTALLATION OF SEALS IN STANDARD GLANDS |
|
MS8005 Revision E:2016
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PERMANENTLY ATTACHED FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLARE |
|
MIL-PRF-26626 Revision F:2008
|
HOSE ASSEMBLY, REINFORCED, CRYOGENIC, OXYGEN |
|
MS27059 Revision E:2013
|
Adapter Assembly, Flared, 45 Degrees Forged Elbow, Tube to Hose - with Swivel Nut |
|
MIL-DTL-83796-2 Revision C:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE |
|
MIL-DTL-9395-30 Revision H:2012
|
Switches, Pressure, (Gage), Type II 5 Amperes |
|
MS8007 Revision D:2016
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PERMANENTLY ATTACHED FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLANGE |
|
MIL-DTL-83798-1 Revision D:2017
|
Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, Straight |
|
MIL-DTL-83798-3 Revision D:2017
|
Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 90 Degrees |
|
SAE ARP 4925 : 2014
|
AEROSPACE DESIGN AND INSTALLATION OF COMMERCIAL TRANSPORT HELICOPTER HYDRAULIC SYSTEMS |
|
SAE ARP 4943 : 2008
|
GROUND SUPPORT EQUIPMENT HYDRAULIC SYSTEMS, DESIGN AND INSTALLATION, RECOMMENDED PRACTICES FOR |
|
SAE AS 4604 : 2003
|
HOSE ASSEMBLY, 3000 PSI, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 400 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS |
|
SAE AS 1946 : 2015
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, UP TO 1500 PSI AND 450 DEGREES F, HYDRAULIC AND PNEUMATIC |
|
SAE AS 4843/1 : 2016
|
FITTINGS, BEADED TO 37 DEGREES FLARED, FLUID CONNECTION |
|
11/30250206 DC : 0
|
BS EN 6140 - AEROSPACE SERIES - PLUG, PROTECTIVE, NON METALLIC FOR FITTING ENDS <= 3000 PSI HYDRAULIC SYSTEMS |