NUTS, SELF-LOCKING, UNS S66286 CLASSIFICATION: 220 KSI/850 DEGREE F PROCUREMENT SPECIFICATION

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

23-02-2017

Publisher

SAE International

1. SCOPE
2. REFERENCES
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
APPENDIX A - WRENCH TORQUE TEST
APPENDIX B - PERMANENT SET TEST
APPENDIX C - REUSABILITY TEST AT ROOM TEMPERATURE, AFTER
             BAKING
APPENDIX D - REUSABILITY TEST AT ROOM TEMPERATURE, AS
             RECEIVED CONDITION
APPENDIX E - 3-CYCLE TEST AT ROOM TEMPERATURE
APPENDIX F - ACCEPTANCE CRITERIA OF SURFACE DISCONTINUITIES
             ON SELF-LOCKING NUTS

Defines the requirements for self-locking nuts, wrenching type (i.e., hexagon, double hexagon, and spline drive), made of a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S66286.

Committee	E-25
DocumentType	Standard
Pages	32
ProductNote	This standard is now stabilized
PublisherName	SAE International
Status	Current
Supersedes	SAE AS 4726 : 1995

SAE AS 1701 : 2017	LUBRICANT, SOLID FILM
MIL L 7808 : K (1)	LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE
SAE AMS 5737 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED
QQ-P-35 Revision C:1988	PASSIVATION TREATMENTS FOR CORROSION-RESISTANT STEEL
MIL-W-8982 Revision D:1989	WRENCHES, SPLINED, HIGH STRENGTH, THIN WALL, GENERAL SPECIFICATION FOR
SAE AMS 2759/3 : 2015	HEAT TREATMENT PRECIPITATION-HARDENING CORROSION-RESISTANT, MARAGING, AND SECONDARY HARDENING STEEL PARTS
SAE AMS 2418 : 2017	PLATING, COPPER
ASME B46.1 : 2009	SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
MIL-STD-1312-8 Revision A:1984	FASTENER TEST METHODS - METHOD 8 - TENSILE STRENGTH
SAE AMS 5734 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C) SOLUTION HEAT TREATED
SAE AS 954 : 2011	WRENCHES, HAND, TWELVE POINT, HIGH STRENGTH, THIN WALL
SAE AMS 5732 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED
MIL-S-8879 Revision C:1991	SCREW THREADS, CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER, GENERAL SPECIFICATION FOR
SAE AMS 5731 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED
SAE AS 7477 : 2016	BOLTS AND SCREWS, STEEL, UNS S66286 TENSILE STRENGTH 130 KSI, PROCUREMENT SPECIFICATION
SAE AMS 2403 : 2015	PLATING, NICKEL, GENERAL PURPOSE
SAE AS 1310 : 2012	FASTENER TORQUE FOR THREADED APPLICATIONS, DEFINITIONS OF