SAE AS 5887 : 2014

Superseded

View Superseded by

INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED PROCUREMENT SPECIFICATION FOR

Available format(s)

Hardcopy , PDF

Superseded date

07-08-2020

Language(s)

English

Published date

01-01-2014

Publisher

SAE International

1. SCOPE
2. REFERENCES
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PACKAGING
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES

This procurement specification covers inserts made from A286 alloy (UNS S66286) which have self-locking internal threads and integrated locking keys to positively secure the insert against rotation when properly installed in threaded holes.

Committee	E-25
DocumentType	Standard
Pages	23
PublisherName	SAE International
Status	Superseded
SupersededBy	SAE AS 5887 : 2014(R2019)

SAE AMS 5737 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS QQ A 250/4 : 2015	ALUMINUM ALLOY 2024, PLATE AND SHEET
MIL-HDBK-57 Revision H:2017	LISTING OF FASTENER MANUFACTURER'S IDENTIFICATION SYMBOLS
SAE AMS 2759/3 : 2015	HEAT TREATMENT PRECIPITATION-HARDENING CORROSION-RESISTANT, MARAGING, AND SECONDARY HARDENING STEEL PARTS
SAE AMS QQ A 250/11 : 1997	ALUMINUM ALLOY 6061, PLATE AND SHEET
ASME B46.1 : 2009	SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
SAE AS 3652 : 2015	INSERT, SCREW THREAD, SHORT, SELF-LOCKING, KEY LOCKED, OVERSIZE SELF-BROACHING KEYS, UNS S66286
SAE AMS 5734 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C) SOLUTION HEAT TREATED
SAE AMS 5732 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED
NASM1312-6:2013	FASTENER TEST METHODS, METHOD 6, HARDNESS
SAE AS 3653 : 2015	INSERT, SCREW THREAD, LONG SELF-LOCKING, KEY LOCKED, SELF-BROACHING KEYS, UNS S66286
SAE AS 8879 : 2004	SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER
SAE AS 3654 : 2015	INSERT, SCREW THREAD, LONG, SELF-LOCKING, KEY LOCKED, OVERSIZE SELF-BROACHING KEYS, UNS S66286
SAE AMS 5731 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED
SAE AMS 2411 : 2013	PLATING, SILVER FOR HIGH TEMPERATURE APPLICATIONS
SAE AMS 2700E : 2011	PASSIVATION OF CORROSION RESISTANT STEELS
NASM1312-13 : 2003	FASTENER TEST METHODS - METHOD 13 - DOUBLE SHEAR TEST
SAE AS 3651 : 2015	INSERT, SCREW THREAD, SHORT, SELF-LOCKING, KEY LOCKED, SELF-BROACHING KEYS, UNS S66286
SAE AMS QQ A 225/8 : 1998	ALUMINUM ALLOY 6061, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED
SAE AS 9133 : 2016	QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PRODUCTS
SAE AS 4724 : 2007	STUDS AND INSERTS, LOCKED IN, SELF-BROACHING KEYS - HOLE DIMENSIONS AND INSTALLATION REQUIREMENTS
SAE AMS QQ A 225/6 : 1998	ALUMINUM ALLOY, 2024, BAR, ROD, AND WIRE; ROLLED, DRAWN, OR COLD FINISHED
FED-STD-H28-20 Revision B:1994	SCREW THREAD STANDARDS FOR FEDERAL SERVICES, SECTION 20, INSPECTION METHODS FOR ACCEPTABILITY OF UN, UNR, UNJ, M, AND MJ SCREW THREADS
SAE AS 1310 : 2012	FASTENER TORQUE FOR THREADED APPLICATIONS, DEFINITIONS OF