SAE J 1127 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
LOW VOLTAGE BATTERY CABLE
Hardcopy , PDF
14-12-2020
English
03-12-2015
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. GENERAL
5. GENERAL SPECIFICATIONS
6. TESTS
7. REFERENCE INFORMATION
8. NOTES
APPENDIX A - FOR INFORMATION ONLY METRIC UNITS
APPENDIX B - RECOMMENDED COLORS
APPENDIX C - SOURCES FOR SAE REFERENCE MATERIALS
Specifies low voltage battery cable intended for use at a nominal system voltage of 60 V DC (25 V AC) or less in surface vehicle electrical systems.
DocumentType |
Revision
|
Pages |
20
|
PublisherName |
SAE International
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
CAN/CSA-C22.2 NO. 60335-2-72:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE |
SAE J 821 : 2003 | ELECTRICAL WIRING SYSTEMS FOR CONSTRUCTION, AGRICULTURAL, AND OFF-ROAD MACHINES |
SAE J1292 : 2008(S2016) | AUTOMOBILE AND MOTOR COACH WIRING |
SAE J 2120 : 2009 | PERSONAL WATERCRAFT - ELECTRICAL SYSTEMS |
SAE J 2697 : 2017 | INVERTER REQUIREMENTS FOR CLASS EIGHT TRUCKS - TRUCK AND BUS |
NFPA 1906 : 2016 | WILDLAND FIRE APPARATUS |
NFPA 1901:2016 | AUTOMOTIVE FIRE APPARATUS |
A-A-52421 Revision A:2010 | ACCESSORY KIT; WARNING DEVICE, DEMOUNTABLE, FOR EMERGENCY VEHICLES |
NFPA 414 : 2017 | AIRCRAFT RESCUE AND FIRE-FIGHTING VEHICLES |
SAE J 1494 : 2012 | BATTERY BOOSTER CABLES |
SAE J 1625 : 2004 | HEAVY-DUTY CIRCUIT BREAKERS |
SAE J 3082 : 2015 | AUXILIARY TWO CONDUCTOR ELECTRICAL POWER CONNECTOR FOR TRUCK-TRAILER HIGH POWER JUMPER CABLE |
SAE J 2202 : 2016 | HEAVY-DUTY WIRING SYSTEMS FOR ON-HIGHWAY TRUCKS |
SAE J 1614 : 2012 | WIRING DISTRIBUTION SYSTEMS FOR OFF-ROAD, SELF-PROPELLED WORK MACHINES |
UL 60335-2-67:1ED 2017-12 | Household and Similar Appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercial use |
UL 60335-2-72:1ED 2017-09 | Household and Similar Electrical Appliances - Safety - Part 2-72: Particular Requirements for Floor Treatment Machines With or Without Traction Drive, for Commercial Use |
KKK-A-1822 Revision E:2002 | STAR-OF-LIFE AMBULANCE |
A-A-52499 Revision A:2009 | LEAD, ELECTRICAL (STORAGE BATTERY) |
SAE J 1654 : 2016 | UNSHIELDED HIGH VOLTAGE PRIMARY CABLE |
SAE J 156 : 2016 | FUSIBLE LINKS |
SAE J 930 : 2016 | STORAGE BATTERIES FOR OFF-ROAD SELF-PROPELLED WORK MACHINES |
A-A-59725 Revision A:2007 | PROTECTOR, AUTOMOTIVE CABLE, HIGH CURRENT, GENERAL REQUIREMENTS FOR |
SAE J 1678 : 2015 | LOW VOLTAGE ULTRA THIN WALL PRIMARY CABLE |
CSA C22.2 No. 60335-2-67 : 2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES, FOR COMMERCIAL USE |
SAE J 2549 : 2016 | SINGLE CONDUCTOR CABLE FOR HEAVY-DUTY APPLICATIONS - TRUCK AND BUS |
SAE ARP 1247 : 2018 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS |
SAE J 2891 : 2015 | AUXILIARY POWER UNIT ELECTRICAL INTERFACE REQUIREMENTS FOR CLASS EIGHT TRUCKS |
NFPA 1917 : 2016 | AUTOMOTIVE AMBULANCES |
SAE USCAR 21 : 2014 | PERFORMANCE SPECIFICATION FOR CABLE-TO-TERMINAL ELECTRICAL CRIMPS |
SAE USCAR 38 : 2009 | PERFORMANCE SPECIFICATION FOR ULTRASONICALLY WELDED WIRE TERMINATIONS |
SAE J 2840 : 2017 | HIGH VOLTAGE SHIELDED AND JACKETED CABLE |
SAE J 1811 : 2013 | POWER CABLE TERMINALS |
SAE J 1128 : 2015 | LOW VOLTAGE PRIMARY CABLE |
SAE J553 : 2016 | CIRCUIT BREAKERS |
SAE USCAR 2-5 : *DUPLICATE RECORD* | **DUPLICATE RECORD** |
SAE ARP 1804 : 2017 | ELECTRIC BAGGAGE/CARGO TRACTOR |
SAE J 378 : 2018 | MARINE PROPULSION SYSTEM WIRING |
ISO 14572:2011 | Road vehicles — Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables — Test methods and requirements for basic- and high-performance cables |
SAE J 1678 : 2015 | LOW VOLTAGE ULTRA THIN WALL PRIMARY CABLE |
SAE J 156 : 2016 | FUSIBLE LINKS |
SAE J 2183 : 2012 | 60 V AND 600 V SINGLE-CORE CABLES |
SAE J 2501 : 2012 | ROUND, SCREENED AND UNSCREENED, 60 V AND 600 V MULTI-CORE SHEATHED CABLES |
SAE J 2840 : 2014 | HIGH VOLTAGE SHIELDED AND JACKETED CABLE |
ASTM D 5374 : 2013 : REDLINE | Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
SAE J 1673 : 2012 | HIGH VOLTAGE AUTOMOTIVE WIRING ASSEMBLY DESIGN |
SAE J 1128 : 2015 | LOW VOLTAGE PRIMARY CABLE |
ISO 6722:2006 | Road vehicles 60 V and 600 V single-core cables Dimensions, test methods and requirements |
ASTM D 833 : 1946 : R1955 | Methods of Identification and Quantitative Analysis of Synthetic Elastomers (Withdrawn 1959) |
SAE J 1654 : 2016 | UNSHIELDED HIGH VOLTAGE PRIMARY CABLE |
SAE J 311 : 2000 | FLUID FOR PASSENGER CAR TYPE AUTOMATIC TRANSMISSIONS |
IEC 60811-2-1:1998+AMD1:2001 CSV | Common test methods for insulating and sheathing materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests |
ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
ASTM D 5423 : 2014 | Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.