TEMA STANDARDS : 9ED 2007

MEMBERSHIP LIST
TECHNICAL COMMITTEE
PREFACE
NOTES TO USERS
1 N NOMENCLATURE
      1 Size Numbering and Type Designation - Recommended
         Practice
      2 Nomenclature of Heat Exchanger Components
2 F FABRICATION TOLERANCES
      1 External Dimensions, Nozzle and Support Locations
      2 Recommended Fabrication Tolerances
      3 Tubesheets, Partitions, Covers, and Flanges
      4 Flange Face Imperfections
3 G GENERAL FABRICATION AND PERFORMANCE INFORMATION
      1 Shop Operation
      2 Inspection
      3 Nameplates
      4 Drawings and ASME Code Data Reports
      5 Guarantees
      6 Preparation of Heat Exchangers for Shipment
      7 General Construction Features of TEMA Standard Heat
         Exchangers
4 E INSTALLATION, OPERATION, AND MAINTENANCE
      1 Performance of Heat Exchangers
      2 Installation of Heat Exchangers
      3 Operation of Heat Exchangers
      4 Maintenance of Heat Exchangers
5 RCB MECHANICAL STANDARD TEMA CLASS RCB HEAT EXCHANGERS
      1 Scope and General Requirements
      2 Tubes
      3 Shells and Shell Covers
      4 Baffles and Support Plates
      5 Floating End Construction
      6 Gaskets
      7 Tubesheets
      8 Flexible Shell Elements
      9 Channels, Covers, and Bonnets
      10 Nozzles
      11 End Flanges and Bolting
6 V FLOW INDUCED VIBRATION
      1 Scope and General
      2 Vibration Damage Patterns
      3 Failure Regions
      4 Dimensionless Numbers
      5 Natural Frequency
      6 Axial Tube Stress
      7 Effective Tube Mass
      8 Damping
      9 Shell Side Velocity Distribution
      10 Estimate of Critical Flow Velocity
      11 Vibration Amplitude
      12 Acoustic Vibration
      13 Design Considerations
      14 Selected References
7 T THERMAL RELATIONS
      1 Scope and Basic Relations
      2 Fouling
      3 Fluid Temperature Relations
      4 Mean Metal Temperatures of Shell and Tubes
8 P PHYSICAL PROPERTIES OF FLUIDS
      1 Fluid Density
      2 Specific Heat
      3 Heat Content
      4 Thermal Conductivity
      5 Viscosity
      6 Critical Properties
      7 Properties of Gas and Vapor Mixtures
      8 Selected References
9 D GENERAL INFORMATION
10 RGP RECOMMENDED GOOD PRACTICE
      G-7.11 Horizontal Vessel Supports
      G-7.12 Vertical Vessel Supports
      G-7.2 Lifting Lugs
      G-7.3 Wind and Seismic Design
      RCB-2 Plugging Tubes in Tube Bundles
      RCB-4 Entrance and Exit Areas
      RCB-7 Tubesheets
      RCB-10 Nozzles
      RCB-11 End Flanges and Bolting
      RCB-12 Finite Element Analysis Guidelines
      T-2 Fouling
Appendix A - Tubesheets
INDEX