TT-P-1757 Revision B:1997
Current
Current
The latest, up-to-date edition.
PRIMER COATING, ALKYD BASE, ONE COMPONENT
Available format(s)
PDF
Language(s)
English
Publisher
Specifies a corrosion inhibiting primer for spray application with low moisture sensitivity, recommended for use under air pollution regulations
| Committee |
FSC 8010
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SAE AMS 3110 : 2013 | Similar to |
| MIL-A-43820 Revision B:1981 | AIR LOCK, (MUST) |
| MIL-I-85889 Base Document:1988 | IGNITER, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR |
| MIL-E-16400 Revision H:1987 | ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR |
| MIL-DTL-18492 Revision B:2011 | TANKS, CARTRIDGE, POWDER, ROCKET, AND COMPONENTS (ALUMINUM) |
| MIL-S-7124 Revision B:1966 | SEALING COMPOUND, POLYSULFIDE, ACCELERATOR REQUIRED FOR AIRCRAFT STRUCTURES |
| MIL-DTL-38449 Revision D:2010 | SIGNAL AND SIGNAL/INTERCOMMUNICATION AMPLIFIERS, UNIVERSAL, AERIAL REFUELING |
| MIL-A-22145 Revision C:1992 | ACCELEROMETER GROUP, COUNTING (MS25447 AND MS25448) |
| MIL-P-9388 Revision B:1986 | PUMP, PRESSURE, OIL FREE AIR TYPE MA-2 |
| MIL-T-45309 Revision E:1983 | TANK, COMBAT, FULL TRACKED, 105 MM GUN, M60, M60A1, M601A (RISE) & M60A3 PROCESSING FOR SHIPMENT & STORAGE OF |
| MIL-STD-193 Revision L:1991 | PAINTING PROCEDURES AND MARKING FOR VEHICLES, CONSTRUCTION EQUIPMENT, MATERIAL HANDLING EQUIPMENT, AND SPARE PARTS |
| MIL B 5806 : F | BOX, SHIPPING, AND STORAGE, HELICOPTER BLADE |
| NASM 1312-21 : 2004 | FASTENER TEST METHODS METHOD 21 SHEAR JOINT FATIGUE, CONSTANT AMPLITUDE |
| MIL-DTL-14072 Revision F:2013 | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| MIL-PRF-25134 Revision C:1996 | REMOVER, PAINT AND LACQUER, SOLVENT TYPE |
| AA-R-200 Revision F:1987 | REFRIGERATOR, MECHANICAL, COMMERCIAL, SELF-CONTAINED, REACH-IN AND PASS-THROUGH |
| MIL T 28800 : E | TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT GENERAL SPECIFICATION FOR |
| MIL-DTL-32360 Base Document:2010 | STOP LIGHT - TAILLIGHT, VEHICULAR-24 VOLT, SERVICE STOP, SERVICE TAIL, BLACKOUT TAIL |
| MIL-G-81559 Revision C:1984 | GYROSCOPE ASSEMBLIES ATTITUDE - DIRECTIONAL REFERENCE INSTRUMENTS FOR AIRCRAFT PACKAGING OF |
| MIL-STD-1312-21 Base Document:1985 | FASTENER TEST METHODS, METHOD 21, SHEAR JOINT FATIGUE CONSTANT AMPLITUDE |
| MIL-R-47196 Revision A:1977 | RIVETS, BUCK TYPE, PREPARATION FOR AN INSTALLATION OF |
| MIL-DTL-18295 Revision F:1998 | CHAINS AND FITTINGS FOR FLEET MOORING |
| MIL-R-85880 Base Document:1988 | ROCKET, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR |
| MIL F 24646 : SUPP 1 | FUSE BOXES, FEEDER DISTRIBUTION, TOTALLY ENCLOSED, 125/25O VOLTS, DIRECT CURRENT, THREE WIRE BUSES, TWO WIRE BRANCHES, O-3O AMPERE MIDGET FUSES, SYMBOLS 6O9, 61O AND 611 |
| MIL-H-9890 Revision E:1988 | HARDWARE, INDIVIDUAL LOAD CARRYING EQUIPMENT: AND HARDWARE, MISCELLANEOUS |
| MIL C 18295 : E | CHAIN AND FITTINGS FOR FLEET MOORINGS |
| MIL-E-52929 Base Document:1977 | ENAMEL, ALKYD, CAMOUFLAGE, FLASH DRY |
| MIL-DTL-62006 Revision C:1998 | COOLER, OIL: TRANSMISSION AND ENGINE |
| MIL-B-18670 Revision A:1976 | BOX, SMALL ARMS AMMUNITION, MARK 1 MOD 0 |
| MIL S 25057 : B | SCREEN SYSTEM, AIR INLET, AIRCRAFT TURBINE ENGINE, GENERAL SPECIFICATION FOR |
| MIL-S-85377 Revision A:1983 | SWITCH, STEPPING, DIRECT CURRENT AIRCRAFT DISPENSER |
| MIL-STD-1516 Revision B:1990 | UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL |
| MIL-S-6150 Revision D:1987 | STARTER, ENGINE, ELECTRICAL, DIRECT CRANKING, AIRCRAFT 28 VOLT DC |
| MIL-S-28633 Revision C:1988 | SHELTER, EQUIPMENT, MULTIPURPOSE |
| MIL-L-45963 Base Document:1974 | LOADER, DELINKING, AIRCRAFT MACHINE GUN, MAU-69A/A |
| MIL-T-704 Revision K:1992 | TREATMENT AND PAINTING OF MATERIAL |
| MIL-C-4150 Revision J:1989 | CASE, TRANSIT AND STORAGE, WATERPROOF AND WATER-VAPORPROOF |
| MIL-S-45387 Revision B:1976 | SPRING, TORSION-BAR, SUSPENSION |
| MIL-F-7179 Revision G:1993 | FINISHES, COATINGS, AND SEALANTS FOR THE PROTECTION OF AEROSPACE WEAPONS SYSTEM |
| SAE AS 4202 : 2015 | ADAPTER - PORT CONNECTION, RING LOCKED DESIGN, INSTALLATION AND REMOVAL OF 8000 PSI SYSTEMS |
| MIL-STD-186 Revision F:2002 | PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
| MIL-P-6808 Revision C:1973 | PRIMER COATING, ZINC CHROMATE, PROCESS FOR APPLICATION OF |
| MIL-K-8662 Revision E:1974 | KNIFE, HUNTING, SHEATHED, SURVIVAL PILOT S |
| TT-R-248 Revision B:1981 | REMOVER, PAINT AND LACQUER, SOLVENT TYPE |
| MIL-L-3851 Revision E:1991 | LOOP, SLIDE [FOR EQUIPAGE] |
| MIL-S-40626 Revision D:1994 | SIGN KIT, VEHICLE CLASS |
| MIL-DTL-3954 Revision D:2015 | DUMMY LOADS, ELECTRICAL, WAVEGUIDE, GENERAL SPECIFICATION FOR |
| MIL T 6117 : D | TERMINAL, CABLE ASSEMBLIES, SWAGED TYPE |
| MIL-DTL-7034 Revision F:2005 | PULLEYS, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-S-85510 Base Document:1981 | |
| MIL-STD-1303 Revision B:1975 | PAINTING OF NAVAL ORDNANCE EQUIPMENT |
| MIL STD 47187 : NOTICE 1 | NUTS, BLIND, PRESS & BLIND RIVET, INSTALLATION OF |
| MIL-C-9897 Revision C:1992 | CRATE, SLOTTED ANGLE, STEEL OR ALUMINUM FOR LIGHTWEIGHT AIRFRAME COMPONENTS AND BULKY ITEMS [FOR MAXIMUM LOADS OF 3000 POUNDS] |
| MIL-DTL-1734 Revision J:2002 | SLIPS, TENT LINE |
| MIL-A-43759 Revision A:1981 | ADAPTERS, AIR LOCK, MUST |
| MIL-E-24572 Revision B:1992 | EXTINGUISHER, FIRE, BROMOTRIFLUOROMETHANE (HALON 13O1) SYSTEMS (FIXED PIPE, PNEUMATICALLY ACTUATED, NAVAL SHIPBOARD USE) |
| MIL-E-52835 Revision A:1977 | ENAMEL, MODIFIED ALKYD, CAMOUFLAGE, LUSTERLESS |
| MIL C 7905 : G | CYLINDERS, STEEL COMPRESSED GAS, NONSHATTERABLE, SEAMLESS 1800 PSI AND 2100 PSI |
| DOD V 24657 : 0 | VALVE, ACTUATOR, DIRECT COUPLED, GEAR DRIVEN ELECTRICALLY POWERED FOR NAVAL SHIPBOARD PROPULSION AND AUXILIARY SYSTEMS (METRIC) |
| MIL-B-233 Revision D:1987 | BOXES, SUPPLY SUPPORT ITEMS, STOWAGE AND STORAGE |
| MIL-C-81790 Revision A:1990 | CONNECTORS, RECEPTACLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, GENERAL SPECIFICATION FOR |
| SAE AS 8662 : 1999 | KNIFE, HUNTING, SHEATHED, SURVIVAL, PILOTS |
| MIL-R-19309 Revision D:2003 | RELAY, SENSITIVE (FOR TORPEDO MARK 37 MOD 2) |
| NASA MSFC SPEC 250 : 1963 | PROTECTIVE FINISHES FOR SPACE VEHICLE STRUCTURES AND ASSOCIATED FLIGHT EQUIPMENT GENERAL SPECIFICATION FOR |
| MIL-B-543 Revision G:1990 | BUCKLE, TONGUELESS AND WEB STRAP |
| MIL-C-11198 Revision K:1984 | CHEST, ICE STORAGE |
| MIL-D-6055 Revision D:1987 | DRUM, METAL REUSABLE, SHIPPING AND STORAGE [CAP FROM 88 TO 510 CUBIC INCHES] |
| MIL-W-36775 Revision A:1979 | WET BULB GLOBE TEMPERATURE KIT |
| MIL L 52962 : 0 | LACQUER, CHLOROSULFONATED POLYETHYLENE, CAMOUFLAGE, LUSTERLESS |
| MIL-H-18911 Revision A:1974 | HEAD AND MOTOR, ROCKET, INERT PARTS, PAINTING AND MARKING |
| SAE ARP 4058 : 2017 | GENERAL SPECIFICATION GUIDE FOR MECHANICAL GEARED ROTARY ACTUATORS |
| MIL C 19836 : B | COOLER, FLUID, INDUSTRIAL, AIR MOTOR AND GENERATOR, NAVAL SHIPBOARD |
| MIL-STD-171 Revision F:2011 | FINISHING OF METAL AND WOOD SURFACES |
| MIL-P-9389 Revision A:1987 | PUMP PRESSURE, OIL AND FREE AIR, TYPE MA AND 3 |
| MIL-DTL-58085 Revision C:2012 | Light, Beacon, Anti-Collision, Aircraft |
| P-C-444 Revision B:1983 | CLEANING COMPOUND, SOLVENT SOLUBLE, GREASE EMULSIFYING |
| MS22064 Revision C:2014 | CLAMP - HOSE |
| MIL W 18445 : D | WINDOWS, NON-ICING, LAMINATED FLAT GLASS, ELECTRICALLY HEATED, WITH CONTROLS |
| MIL P 7034 : D | PULLEY, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT |
| MIL-STD-188-124 Revision B:1992 | GROUNDING BONDING AND SHIELDING FOR COMMON LONG HAUL TACTICAL COMMUNICATION SYSTEMS INCLUDING GROUND BASED COMMUNICATIONS ELECTRONICS FACILITIES & EQUIPMENTS |
| MIL-A-37953 Base Document:1983 | ANESTHESIA APPARATUS, GAS, NITROUS OXIDE |
| MIL-DTL-19834 Revision C:2006 | PLATES, IDENTIFICATION OR INSTRUCTION, METAL FOIL, ADHESIVE BACKED, GENERAL SPECIFICATION FOR |
| MIL-H-9896 Revision C:1988 | HARDWARE, UNIVERSAL LOAD CARRYING SLING |
| MIL-B-13207 Revision D:1976 | BODY, VAN, VEHICLE-MOUNTED, GENERAL SPECIFICATION FOR |
| MIL C 87937 : B | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| MIL-DTL-7905 Revision H:2003 | CYLINDERS, STEEL, COMPRESSED GAS, NON-SHATTERABLE, SEAMLESS, 1800 PSI AND 2100 PSI |
| MIL-STD-403 Revision C:1992 | PREPARATION FOR AND INSTALLATION OF RIVETS AND SCREWS, ROCKET AND MISSILE STRUCTURES |
| MIL-B-2481 Revision E:1973 | BULLS EYES, RIGGING, 5/16 INCH INSIDE DIAMETER |
| SAE AS 1959 : 2012 | INSERT - RING LOCKED, FLUID CONNECTION PORT DESIGN, INSTALLATION AND REMOVAL OF |
| MIL-W-87105 Base Document:1977 | WAVEGUIDE ASSEMBLIES, GENERAL SPECIFICATION FOR |
| SAE AS 22145 : 2012 | ACCELEROMETER GROUP, COUNTING (MS25447 AND MS25448) |
| MIL-P-11268 Revision L:1983 | PART, MATERIALS, AND PROCESSES USED IN ELECTRONIC EQUIPMENT |
| SAE AS 6055 : 2006 | DRUM, METAL REUSABLE, SHIPPING AND STORAGE (CAP. FROM 88 TO 510 CUBIC INCHES) |
| MIL-DTL-43695 Revision C:2000 | FRAME SECTIONS, TENT, FRAME TYPE, EXPANDABLE |
| MIL F 14072 : D | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| FED-STD-313 Revision D:1996 | MATERIAL SAFETY DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES |
| DOD-P-15328 Revision D:1978 | PRIMER (WASH), PRETREATMENT (FORMULA NO. 117 FOR METALS) (METRIC) |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| ASTM D 1729 : 2016 : REDLINE | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 1200 : 2010 | Standard Test Method for Viscosity by Ford Viscosity Cup |
| ANSI Z129.1 : 2006 | HAZARDOUS INDUSTRIAL CHEMICALS - PRECAUTIONARY LABELING |
| TT-S-735 Revision A:1988 | STANDARD TEST FLUIDS, HYDROCARBON |
| MIL-C-8514 Revision C:1967 | COATING, COMPOUND, METAL PRETREATMENT, RESIGN ACID [ASG] |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| MIL T 81772 : B | THINNER, AIRCRAFT COATING |
| ASTM G 26 : 1996 | Practice for Operating Light-Exposure Apparatus (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials (Withdrawn 2000) |
| TT-L-32 Revision A:1969 | LACQUER, CELLULOSE NITRATE, GLOSS, FOR AIRCRAFT USE |
| QQ-A-250-5 Revision F:1971 | ALUMINUM ALLOY ALCLAD 2024, PLATE AND SHEET |
| FED-STD-141 Revision D:2001 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING |
| FED-STD-595 Revision C:2008 | COLORS USED IN GOVERNMENT PROCUREMENT |
| PPP-P-1892 Base Document:1974 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, PACKAGING, PACKING, AND MARKING OF |
£16.70
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.