Automatic Electrical Controls - Part 1: General Requirements

Available format(s)

Hardcopy

Published date

03-08-2016

Publisher

Underwriters Laboratories

In general, this part of IEC 60730 applies to automatic ELECTRICAL CONTROLS for use in, on, or in association with equipment for household and similar use.

DevelopmentNote	Supersedes UL 8730-1 (09/2001)
DocumentType	Standard
Pages	0
PublisherName	Underwriters Laboratories
Status	Current
Supersedes	UL 60730-1:4ED 2009-10

UL 60730-2-9:4ED 2017-02	Automatic Electrical Controls - Part 2-9: Particular Requirements for Temperature Sensing Controls
CSA C22.2 No. 107.3 : 2014	UNINTERRUPTIBLE POWER SYSTEMS
UL 1647:6ED 2015-08	Motor-Operated Massage and Exercise Machines
CSA C22.2 No. 104 : 2011 : R2015	HUMIDIFIERS
ANSI Z21.5.1-2017/CSA 7.1-2017	Gas clothes dryers, volume I, type 1 clothes dryers
ANSI Z21.5.1-2017/CSA 7.1-2017	GAS CLOTHES DRYERS, VOLUME 1, TYPE 1 CLOTHES DRYERS
UL 429:7ED 2013-11	Electrically Operated Valves
UL 508A:3ED 2018-04	Industrial Control Panels
UL 737:10ED 2011-04	Standard for Fireplace Stoves
UL 1431:3ED 2011-03	Personal Hygiene and Health Care Appliances
UL 1727:5ED 2012-05	Commercial Electric Personal Grooming Appliances
UL 943B:3ED 2017-12	Appliance Leakage-Current Interrupters
UL 697:7ED 2011-03	Toy Transformers
UL 1815:5ED 2012-02	Nonducted Heat Recovery Ventilators
UL 296:11ED 2017-02	Oil Burners
NEMA DC 3:2013	Residential Controls—Electrical Wall-Mounted Room Thermostats
ANSI/CSA FC 1:2014	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
NFPA 70 : 2017	NATIONAL ELECTRICAL CODE
UL 1993:5ED 2017-01	Self-Ballasted Lamps and Lamp Adapters
UL 1740:4ED 2018-01	Robots and Robotic Equipment
UL 507:10ED 2017-11	Electric Fans
CSA C22.2 No. 284 : 2016	NONINDUSTRIAL PHOTOELECTRIC SWITCHES FOR LIGHTING CONTROL
CSA C22.2 No. 112 : 2015	ELECTRIC CLOTHES DRYERS
UL 506:14ED 2017-06	Specialty Transformers
UL 756:8ED 2016-08	Standard for Coin and Currency Changers and Actuators
UL 2106:2ED 2006-04	Standard for Field Erected Boiler Assemblies
UL 1559:5ED 2011-03	Insect-Control Equipment - Electrocution Type
UL 458:6ED 2015-09	Power Converters/Inverters and Power Converter/Inverter Systems for Land Vehicles and Marine Crafts
UL 921 : 7	COMMERCIAL DISHWASHERS
UL 621:7ED 2010-05	Ice Cream Makers
UL 1083:6ED 2009-01	Household Electric Skillets and Frying-Type Appliances
UL 291:6ED 2012-02	Automated Teller Systems
UL 907:4ED 2016-03	Standard for Fireplace Accessories
UL 555S:5ED 2014-02	Smoke Dampers
UL 963:4ED 2016-02	Standard for Sealing, Wrapping, and Marking Equipment
UL 2108:2ED 2015-12	Low Voltage Lighting Systems
UL 795:8ED 2016-12	Commercial-Industrial Gas Heating Equipment
C22.2 NO. 1993-17	Self-ballasted lamps and lamp adapters (Trinational standard with NMX-J-578/1-ANCE and UL 1993)
UL 1963:4ED 2011-06	Refrigerant Recovery/Recycling Equipment
UL 1236:8ED 2015-04	Battery Chargers for Charging Engine-Starter Batteries
UL 150:4ED 2004-11	Antenna Rotators
UL 773A:6ED 2016-01	Nonindustrial Photoelectric Switches for Lighting Control
UL 763:5ED 2018-02	Motor-Operated Commercial Food Preparing Machines
UL 730:5ED 2003-08	Oil-Fired Wall Furnaces
UL 923:7ED 2013-05	Microwave Cooking Appliances
UL 1018:6ED 2011-04	Electric Aquarium Equipment
UL 499:14ED 2014-11	Electric Heating Appliances
UL 283:3ED 2015-06	Air Fresheners and Deodorizers
UL 1778:5ED 2014-06	Uninterruptible Power Systems
UL 391:5ED 2010-09	Standard for Solid-Fuel and Combination-Fuel Central and Supplementary Furnaces
UL 896:5ED 1993-07	Oil-Burning Stoves
UL 729:6ED 2003-08	Oil-Fired Floor Furnaces
UL 555:7ED 2006-07	Fire Dampers
UL 462:3ED 2010-12	Standard for Heat Reclaimers for Gas-, Oil-, or Solid Fuel-Fired Appliances
UL 916:5ED 2015-10	Energy Management Equipment
UL 731:6ED 2018-01	Oil-Fired Unit Heaters
UL 1795:5ED 2016-09	Standard for Hydromassage Bathtubs
UL 791:5ED 2006-11	Residential Incinerators
UL 2044 : 3	COMMERCIAL CLOSED-CIRCUIT TELEVISION EQUIPMENT
UL 858:16ED 2014-11	Household Electric Ranges
UL 696:10ED 2010-02	Standard for Electric Toys
ANSI Z83.21 : 2016	COMMERCIAL DISHWASHERS
CSA C22.2 No. 167 : 2017	HOUSEHOLD DISHWASHERS
CSA C22.2 No. 169 : 2015	ELECTRIC CLOTHES WASHING MACHINES AND EXTRACTORS
CSA C22.2 No. 168 : 2016	COMMERCIAL DISHWASHERS
CSA C22.2 No. 104:2011	HUMIDIFIERS
UL 482:9ED 2005-09	Standard for Portable Sun/Heat Lamps
UL 1447:6ED 2017-10	Standard for Electric Lawn Mowers
UL 1563:6ED 2009-07	Electric Spas, Equipment Assemblies, and Associated Equipment
UL 82:9ED 2017-08	Electric Gardening Appliances
UL 541:9ED 2016-04	Refrigerated Vending Machines
UL 1482:7ED 2011-04	Solid-Fuel Type Room Heaters
UL 508:18ED 2018-03	Industrial Control Equipment
UL 1090:7ED 2016-10	Electric Snow Movers
UL 325:7ED 2017-05	Door, Drapery, Gate, Louver, and Window Operators and Systems
UL 73:10ED 2011-03	Motor-Operated Appliances
CSA C22.2 No. 104 : 2011 : INC : UPD 1 : 2016 : R201500	HUMIDIFIERS
C22.2 NO. 243-17	Vacuum cleaners, blower cleaners, and household floor finishing machines (Binational standard with UL 1017)
C22.2 NO. 236-15	Heating and cooling equipment (Bi-national standard with UL 1995)
SAE J 3030 : 2015	AUTOMOTIVE REFRIGERANT RECOVERY/RECYCLING/RECHARGING EQUIPMENT INTENDED FOR USE WITH BOTH R-1234YF AND R-134A

IEC 61000-4-8 : 2.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST
CISPR 14-1:2016	Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
IEC 60112:2003+AMD1:2009 CSV	Method for the determination of the proof and the comparative tracking indices of solid insulating materials
IEC 60038:2009	IEC standard voltages
UL 863:8ED 2007-11	Standard for Time-Indicating and -Recording Appliances
IEC 60245-1:2003+AMD1:2007 CSV	Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
IEC 60738-1:2006+AMD1:2009 CSV	Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification
IEC 60664-4:2005	Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress
UL 514A:11ED 2013-02	Metallic Outlet Boxes
IEC 60384-14:2013+AMD1:2016 CSV	Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
UL 50:13ED 2015-10	Enclosures for Electrical Equipment, Non-Environmental Considerations
UL 5085-3:1ED 2006-04	Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers
UL 486D:6ED 2015-06	Sealed Wire Connector Systems
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION)	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
IEC 60998-2-3:2002	Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units
ISO 16484-2:2004	Building automation and control systems (BACS) — Part 2: Hardware
UL 4200A:1ED 2015-02	Products Incorporating Button Batteries or Coin Cell Batteries
IEC 61000-4-11:2004+AMD1:2017 CSV	Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
IEC 61210:2010	Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
UL 1283:7ED 2017-05	Electromagnetic Interference Filters
IEC 62151:2000	Safety of equipment electrically connected to a telecommunication network
IEC 61558-2-16:2009+AMD1:2013 CSV	Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particularrequirements and tests for switch mode power supply units andtransformers for switch mode power supply units
IEC 61000-4-8:2009	Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
UL 83:16ED 2017-07	Standard for Thermoplastic-Insulated Wires and Cables
IEC 61000-4-4:2012 RLV	Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
IEC 60695-2-11:2014	Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV	Low-voltage fuses - Part 1: General requirements
UL 917:5ED 2006-11	Standard for Clock-Operated Switches
IEC 61558-2-6:2009	Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
IEC 60127-1:2006+AMD1:2011+AMD2:2015 CSV	Miniature fuses - Part 1: Definitions for miniature fuses andgeneral requirements for miniature fuse-links
UL 635:3ED 2012-03	Insulating Bushings
IEC 60227-1:2007	Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
IEC 61000-4-6 : 4.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
IEC 60999-1:1999	Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
IEC 61000-4-6:2013	Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
CISPR 22:2008	Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
UL 514C:4ED 2014-04	Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers
IEC 60085:2007	Electrical insulation - Thermal evaluation and designation
IEC 60998-2-2:2002	Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
IEC 61000-4-28:1999+AMD1:2001+AMD2:2009 CSV	Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase
IEC 60384-17:2005	Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
IEC 61058-1:2016	Switches for appliances - Part 1: General requirements
IEC 60738-1-1:2008	Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application - Assessment level EZ
IEC 60099-1:1991+AMD1:1999 CSV	Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV	Low-voltage switchgear and controlgear - Part 1: General rules
IEC 61000-4-2:2008	Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV	Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
IEC 60423:2007	Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings
UL 372:6ED 2007-07	Automatic Electrical Controls for Household and Similar Use - Part 2: Particular Requirements for Burner Ignition Systems and Components
IEC 61643-11:2011	Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods
IEC 61000-3-3:2013 RLV	Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
UL 746A:6ED 2012-09	Polymeric Materials - Short Term Property Evaluations
UL 429:7ED 2013-11	Electrically Operated Valves
IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION)	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
IEC 60068-2-75:2014	Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60664-3:2016	Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
CISPR 11:2015 RLV	Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
IEC 60695-10-2:2014	Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
UL 1577:5ED 2014-04	Optical Isolators
IEC 60695-2-10:2013	Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
IEC 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 62368-1:2014	Audio/video, information and communication technology equipment - Part 1: Safety requirements
IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV	Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests
IEC 60384-16:2005	Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors
IEC 61000-3-2 : 4.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)