Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)

Available format(s)

Hardcopy , PDF

Language(s)

Spanish, Castilian, English

Published date

29-12-2015

Publisher

Asociacion Espanola de Normalizacion

Committee	CTN 149
DevelopmentNote	Supersedes UNE EN 124. (04/2017)
DocumentType	Standard
Pages	44
PublisherName	Asociacion Espanola de Normalizacion
Status	Current
Supersedes	UNE-EN 124:1995 UNE-EN 124:2000 ERRATUM

Standards	Relationship
EN 124-6:2015	Identical

ISO 4892-1:2016	Plastics Methods of exposure to laboratory light sources Part 1: General guidance
ISO 580:2005	Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
EN ISO 3126:2005	Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
EN 12200-1:2016	Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
EN ISO 8256:2004	Plastics - Determination of tensile-impact strength (ISO 8256:2004)
EN 124-2:2015	Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron
EN 13598-1:2010	Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers
ISO 3506-1:2009	Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs
EN ISO 4892-1:2016	Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
EN ISO 4892-3:2016	Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
ISO 1133-1:2011	Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method
ISO 3127:1994	Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method
ISO 6964:1986	Polyolefin pipes and fittings Determination of carbon black content by calcination and pyrolysis Test method and basic specification
EN 13598-2:2016	Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
EN 607:2004	Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
ISO 8256:2004	Plastics — Determination of tensile-impact strength
ISO 15100:2000	Plastics Reinforcement fibres Chopped strands Determination of bulk density
EN ISO 9163:2005	Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005)
EN 13823:2010+A1:2014	REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
ISO 9163:2005	Textile glass — Rovings — Manufacture of test specimens and determination of tensile strength of impregnated rovings
ISO 3126:2005	Plastics piping systems Plastics components Determination of dimensions
EN ISO 1133-1:2011	Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
EN ISO 9001:2015	Quality management systems - Requirements (ISO 9001:2015)
ISO 4892-3:2016	Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps
EN 14758-1:2012	Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
ISO 1183-1:2012	Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
EN 1433:2002/A1:2005	DRAINAGE CHANNELS FOR VEHICULAR AND PEDESTRIAN AREAS - CLASSIFICATION, DESIGN AND TESTING REQUIREMENTS, MARKING AND EVALUATION OF CONFORMITY
EN 12666-1:2005+A1:2011	Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
ISO 1183-2:2004	Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method
ISO 9001:2015	Quality management systems — Requirements
EN ISO 580:2005	Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005)
EN 1401-1:2009	Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
EN 12164:2016	Copper and copper alloys - Rod for free machining purposes
ISO 4892-2:2013	Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
EN 124-4:2015	Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete
EN 16245-3:2013	Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
EN 124-3:2015	Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys
EN 20105-A02 : 1994	TEXTILES - TESTS FOR COLOUR FASTNESS - PART A02: GREYSCALE FOR ASSESSING CHANGE IN COLOUR (ISO 105-A02:1993)
ISO 105-A02:1993	Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour
ISO 1888:2006	Textile glass Staple fibres or filaments Determination of average diameter
EN 124-5:2015	Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials
EN 12201-1:2011	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
ISO 3506-2:2009	Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts
ISO 178:2010	Plastics Determination of flexural properties
EN ISO 4892-2:2013	Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
EN 513:1999	Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering
EN 124-1:2015	Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods
EN ISO 1183-1:2012	Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
ISO 527-1:2012	Plastics Determination of tensile properties Part 1: General principles
EN ISO 1183-2:2004	PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 2: DENSITY GRADIENT COLUMN METHOD