UNE-EN 1504-2:2005
Current
Current
The latest, up-to-date edition.
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
Available format(s)
Hardcopy , PDF
Language(s)
Spanish, Castilian, English
Published date
26-10-2005
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Performance characteristics for intended uses
4.1 General
4.2 Selection of appropriate products or systems
5 Requirements
5.1 Identification requirements
5.2 Performance requirements
5.3 Release of dangerous substances
5.4 Reaction to fire
6 Sampling
7 Evaluation of conformity
7.1 General
7.2 Initial type testing
7.3 Factory production control
7.4 Assessment, surveillance and certification of factory
production control
8 Marking and labelling
Annex A (informative) Minimum frequency of testing for factory
production control
Annex B (informative) Examples of the application of the
classification system in three individual cases
Annex C (informative) Release of dangerous substances
Annex ZA (informative) Clauses addressing the provisions of
EU Construction Products Directive
ZA.1 Scope and relevant characteristics
ZA.2 Attestation of conformity
ZA.2.1 System(s) of attestation of conformity
ZA 2.2 EC Certificate and Declaration of conformity
ZA.3 CE marking and labelling
Bibliography
Describes requirements for the identification, performance (including durability aspects), safety and evaluation of conformity of products and systems to be used for surface protection of concrete, to increase the durability of concrete and reinforced concrete structures, as well as for new concrete and for maintenance and repair work.
| Committee |
CTN 83
|
| DocumentType |
Standard
|
| Pages |
48
|
| PublisherName |
Asociacion Espanola de Normalizacion
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 1504-2 : 2005 | Identical |
| NBN EN 1504-2 : 2005 | Identical |
| NEN EN 1504-2 : 2004 | Identical |
| NS EN 1504-2 : 1ED 2005 | Identical |
| I.S. EN 1504-2:2004 | Identical |
| SN EN 1504-2 : 2004 | Identical |
| UNI EN 1504-2 : 2005 | Identical |
| BS EN 1504-2:2004 | Identical |
| EN 1504-2:2004 | Identical |
| DIN EN 1504-2:2015-03 (Draft) | Identical |
| DIN EN 1504-2:2005-01 | Identical |
| ISO 7783-2:1999 | Paints and varnishes Coating materials and coating systems for exterior masonry and concrete Part 2: Determination and classification of water-vapour transmission rate (permeability) |
| ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
| EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
| EN 13578:2003 | Products and systems for the protection and repair of concrete structure - Test Method - Compatibility on wet concrete |
| EN 13687-3:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact |
| EN ISO 5470-1:2016 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
| EN 13581:2002 | Products and systems for the protection and repair of concrete structures - Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress |
| ISO 3451-1:2008 | Plastics Determination of ash Part 1: General methods |
| EN 13529:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack |
| EN 12190:1998 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar |
| EN 13687-5:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 5: Resistance to temperature shock |
| EN ISO 2431:2011 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
| ISO 3219:1993 | Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate |
| EN 1242:2013 | Adhesives - Determination of isocyanate content |
| EN 13687-2:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock) |
| EN 13579:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Drying test for hydrophobic impregnation |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| EN 13580:2002 | Products and systems for the protection and repair of concrete structures - Test Methods - Water absorption and resistance to alkali for hydrophobic impregnations |
| EN ISO 3451-1:2008 | Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2008) |
| EN 1542:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off |
| EN 1767:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis |
| EN ISO 2811-2:2011 | Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
| EN 13395-2:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar |
| EN 13036-4:2011 | Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN 1015-7:1998 | Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar |
| EN 1062-11:2002/AC:2005 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 11: METHODS OF CONDITIONING BEFORE TESTING |
| EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
| EN ISO 9514:2005 | Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) |
| EN ISO 4628-4:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016) |
| EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
| EN 1877-2:2000 | Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number |
| ISO 4628-4:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking |
| EN 1240:2011 | Adhesives - Determination of hydroxyl value and/or hydroxyl content |
| ISO 4628-5:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
| EN ISO 7783-1:1999 | Paints and varnishes - Determination of water-vapour transmission rate - Part 1: Dish method for free films (ISO 7783-1:1996, including Technical Corrigendum 1:1998) |
| ISO 2811-2:2011 | Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
| EN ISO 11358 : 1997 | PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - GENERAL PRINCIPLES |
| ISO 5470-1:2016 | Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 1: Taber abrader |
| EN 1062-6:2002 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability |
| EN 12192-1:2002 | Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar |
| EN ISO 3219:1994 | Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993) |
| ISO 1517:1973 | Paints and varnishes Surface-drying test Ballotini method |
| ISO 11358:1997 | Plastics Thermogravimetry (TG) of polymers General principles |
| ISO 2815:2003 | Paints and varnishes Buchholz indentation test |
| ISO 2812-1:2017 | Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
| ISO 6272-1:2011 | Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter |
| EN 1015-3:1999/A2:2006 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 3: DETERMINATION OF CONSISTENCE OF FRESH MORTAR (BY FLOW TABLE) |
| EN ISO 2815:2003 | Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
| EN 206-1:2000/A2:2005 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| EN 1015-6:1998/A1:2006 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 6: DETERMINATION OF BULK DENSITY OF FRESH MORTAR |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| EN 12617-1:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS) |
| EN ISO 7783-2:1999 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability) (ISO 7783-2:1999) |
| EN 1877-1:2000 | Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent |
| EN 1504-1:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions |
| EN 1504-8:2016 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP) |
| EN 14630:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN ISO 4628-5:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
| EN 1062-3:2008 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| EN 13687-1:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion |
| EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
| EN 1766:2017 | Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing |
| ISO 9514:2005 | Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
| EN 1770:1998 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion |
| EN ISO 6272-1:2011 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
| EN 13813:2002 | Screed material and floor screeds - Screed material - Properties and requirements |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| EN 1062-7:2004 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties |
| ENV 1504-9 : DRAFT 1997 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - GENERAL PRINCIPLES FOR THE USE OF PRODUCTS AND SYSTEMS |
| ISO 2431:2011 | Paints and varnishes Determination of flow time by use of flow cups |
| EN 13294:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time |
£79.62
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - Spanish
PDF - Spanish
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.