IEC 60243-1:2013
|
Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
|
EN 62262:2002
|
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
|
IEC 60721-1:1990+AMD1:1992+AMD2:1995 CSV
|
Classification of environmental conditions - Part 1: Environmental parameters and their severities
|
IEC 60076-7:2005
|
Power transformers - Part 7: Loading guide for oil-immersed power transformers
|
EN ISO 6508-1:2016
|
Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
|
IEC 61936-1:2010+AMD1:2014 CSV
|
Power installations exceeding 1 kV a.c. - Part 1: Common rules
|
EN 60068-2-75:2014
|
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
|
IEC 62271-200:2011
|
High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
|
IEC 60068-1:2013
|
Environmental testing - Part 1: General and guidance
|
IEC 60724:2000+AMD1:2008 CSV
|
Short-circuit temperature limits of electric cables with rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV)
|
IEC 62271-201:2014
|
High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
|
ISO 11408:1999
|
Chemical conversion coatings Black oxide coating on iron and steel Specification and test methods
|
ISO 1716:2010
|
Reaction to fire tests for products Determination of the gross heat of combustion (calorific value)
|
EN 62271-1:2017
|
High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
|
IEC 60364-4-41:2005+AMD1:2017 CSV
|
Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
|
ISO 13732-1:2006
|
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
|
IEC GUIDE 117:2010
|
Electrotechnical equipment - Temperatures of touchable hot surfaces
|
CLC/TR 62271-208 : 2010
|
High-voltage switchgear and controlgear - Part 208: Methods to quantify the steady state, power-frequency electromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations
|
IEC 60050-441:1984
|
International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
|
EN 61439-1:2011
|
Low-voltage switchgear and controlgear assemblies - Part 1: General rules
|
ISO 6508-1:2016
|
Metallic materials — Rockwell hardness test — Part 1: Test method
|
EN 60076-5:2006
|
Power transformers - Part 5: Ability to withstand short-circuit
|
EN 62271-201:2014
|
High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
|
EN 60076-13 : 2006
|
POWER TRANSFORMERS - PART 13: SELF-PROTECTED LIQUID-FILLED TRANSFORMERS
|
HD 60364-4-41:2017/A11:2017
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
|
IEC 60076-10:2016
|
Power transformers - Part 10: Determination of sound levels
|
EN ISO 1182:2010
|
Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010)
|
EN 60076-11:2004
|
Power transformers - Part 11: Dry-type transformers
|
IEC 60076-5:2006
|
Power transformers - Part 5: Ability to withstand short circuit
|
ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
|
IEC TR 62271-300:2006
|
High-voltage switchgear and controlgear - Part 300: Seismic qualification of alternating current circuit-breakers
|
IEC TR 62655:2013
|
Tutorial and application guide for high-voltage fuses
|
ISO 1052:1982
|
Steels for general engineering purposes
|
EN 60947-1:2007/A2:2014
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
|
ISO 2081:2008
|
Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel
|
ISO 1182:2010
|
Reaction to fire tests for products Non-combustibility test
|
IEC TS 62271-304:2008
|
High-voltage switchgear and controlgear - Part 304: Design classes for indoor enclosed switchgear and controlgear for rated voltages above 1 kV up to and includuing 52 kV to be used in severe climatic conditions
|
ISO 10546:1993
|
Chemical conversion coatings Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
|
IEC 60076-12:2008
|
Power transformers - Part 12: Loading guide for dry-type power transformers
|
EN 60076-10:2016
|
Power transformers - Part 10: Determination of sound levels
|
IEC 60721-2-2:2012
|
Classification of environmental conditions - Part 2-2: Environmental conditions appearing in nature - Precipitation and wind
|
ISO/IEC Guide 51:2014
|
Safety aspects Guidelines for their inclusion in standards
|
HD 478.2.4 : 200S1
|
CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - ENVIRONMENTAL CONDITIONS APPEARING IN NATURE - SOLAR RADIATION AND TEMPERATURE
|
EN 60721-2-2 : 2013
|
Classification of environmental conditions - Part 2-2: Environmental conditions appearing in nature - Precipitation and wind
|
IEC 60076-3:2013
|
Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
|
EN 61439-2 : 2011
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES (IEC 61439-2:2011)
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code)
|
IEC TR 61641:2014
|
Enclosed low-voltage switchgear and controlgear assemblies - Guide for testing under conditions of arcing due to internal fault
|
IEC 60076-1:2011
|
Power transformers - Part 1: General
|
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV
|
Low-voltage switchgear and controlgear - Part 1: General rules
|
ISO 1920-4:2005
|
Testing of concrete Part 4: Strength of hardened concrete
|
EN 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
|
IEC 62262:2002
|
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
|
EN 60076-1:2011
|
POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011)
|
IEC 62271-1:2017
|
High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
|
IEC 60050-461:2008
|
International Electrotechnical Vocabulary (IEV) - Part 461: Electric cables
|
EN 206-1:2000/A2:2005
|
CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
|
ISO 9227:2017
|
Corrosion tests in artificial atmospheres — Salt spray tests
|
IEC 60076-2:2011
|
Power transformers - Part 2: Temperature rise for liquid-immersed transformers
|
IEC 60068-2-75:2014
|
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
|
IEC TR 62271-208:2009
|
High-voltage switchgear and controlgear - Part 208: Methods to quantify the steady state, power-frequency electromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations
|
IEC 61439-1:2011
|
Low-voltage switchgear and controlgear assemblies - Part 1: General rules
|
IEC 60721-2-4:1987+AMD1:1988 CSV
|
Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature
|
ISO 1460:1992
|
Metallic coatings Hot dip galvanized coatings on ferrous materials Gravimetric determination of the mass per unit area
|
EN 60721-1:1995/A2:1995
|
CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 1: ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES
|
IEC 60059:1999+AMD1:2009 CSV
|
IEC standard current ratings
|
IEC 61180-1:1992
|
High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements
|
IEC 60076-13:2006
|
Power transformers - Part 13: Self-protected liquid-filled transformers
|
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
|
ISO 2409:2013
|
Paints and varnishes Cross-cut test
|
EN 60076-2:2011
|
Power transformers - Part 2: Temperature rise for liquid-immersed transformers
|
EN ISO 1716:2010
|
Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
|
IEC TS 60815-1:2008
|
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 1: Definitions, information and general principles
|
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
|
EN 62271-200:2012/AC:2015
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: AC METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV (IEC 62271-200:2011)
|
EN 61180-1:1994
|
High-voltage test techniques for low-voltage equipment - Part 1: Definitions, test and procedure requirements
|
ISO 3231:1993
|
Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide
|
IEC 61439-2:2011
|
Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies
|