• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

UNE-EN 89:2016

Current
Current

The latest, up-to-date edition.

Gas-fired storage water heaters for the production of domestic hot water
Available format(s)

Hardcopy , PDF

Language(s)

Spanish, Castilian, English

Published date

20-04-2016

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification of storage water heaters
      4.1 Classification of gases
      4.2 Appliance categories
      4.3 Mode of supply of the combustion air and
             evacuation of the combustion products
             (appliance types)
5 Marking and instructions
      5.1 Appliance marking
      5.2 Instructions
      5.3 Presentation
6 Constructional requirement
      6.1 General
      6.2 Adjusting, control and safety devices
      6.3 Main burner
      6.4 Discharge of condensate
7 Operational requirements
      7.1 Carrying out the tests
      7.2 Soundness
      7.3 Heat inputs
      7.4 Temperature of the control knobs
      7.5 Temperature of the adjusting, control and safety
             devices
      7.6 Limit temperature of the walls and the test
             panels
      7.7 Ignition - Cross-lighting - Flame stability
      7.8 Temperature of combustion products in condensing
             appliances
      7.9 Adjusting, control and safety devices
      7.10 Repeated draw-off
      7.11 Nominal capacity
      7.12 Combustion
      7.13 Non-condensation in the flue (Type B appliances)
      7.14 Formation of condensate (in the case of
             condensing appliances)
      7.15 Prepurging
      7.16 Air monitoring device
8 Rationale use of energy
      8.1 Efficiency
      8.2 Maintenance consumption
9 Fitness for purpose
      9.1 Heating-up time
      9.2 Mixing factor of the water temperature in the
             appliance
      9.3 Draw-off limits causing operation of the burner
      9.4 Continuous draw-off
      9.5 Specific rate
Annex A (informative) National situations
Annex B (normative) Test apparatus for Type C11 appliances
                    (see 7.7.2.2.2.1)
Annex C (normative) Test apparatus for Type C21 appliances
                    (see 7.7.2.2.2.2)
Annex D (informative) Examples of composition of the gas
                      circuit
Annex E (normative) Soundness test - Volumetric method
Annex F (informative) Guidelines for extension to other
                      categories
Annex G (informative) Protection against electric shock for
                      high voltage ignition devices
                      (see 6.1.10)
Annex H (informative) Examples of marking on the appliance
Annex J (normative) Marking on the appliance and its
                    packaging - Explicit identification of
                    gas types following the use declared by
                    the countries in their official
                    language(s)
Annex K (informative) A-deviations
Annex L (normative) Special national conditions
Annex ZA (informative) Clauses of this European Standard
                       addressing essential requirements or
                       other provisions of EU Directives

Gives specifications and test procedures for construction, safety, rational use of energy and fitness for purpose, environment and classification and marking of gas-fired storage domestic water heaters.

Committee
CTN 60
DocumentType
Standard
Pages
162
PublisherName
Asociacion Espanola de Normalizacion
Status
Current
Supersedes
UnderRevision

Standards Relationship
NBN EN 89 : 2015 Identical
NEN EN 89 : 2015 Identical
NS EN 89 : 1999 Identical
I.S. EN 89:2015 Identical
SN EN 89:2015 Identical
UNI EN 89 : 2008 Identical
BS EN 89:2015 Identical
EN 89:2015 Identical
DIN EN 89:2015-08 Identical

EN 1859:2009+A1:2013 Chimneys - Metal chimneys - Test methods
IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
IEC 60730-2-9:2015 RLV Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
EN ISO 8256:2004 Plastics - Determination of tensile-impact strength (ISO 8256:2004)
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
ISO 815-1:2014 Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures
EN 1490:2000 Building valves - Combined temperature and pressure relief valves - Tests and requirements
EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
EN 13203-1:2015 Gas fired domestic appliances producing hot water - Part 1: Assessment of performance of hot water deliveries
EN 13216-1:2004 Chimneys - Test methods for system chimneys - Part 1: General test methods
ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
EN 13203-2:2015 Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption
EN ISO 178:2010/A1:2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
ISO 8256:2004 Plastics — Determination of tensile-impact strength
EN ISO 3166-1:2014 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
EN 161:2011+A3:2013 Automatic shut-off valves for gas burners and gas appliances
ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
EN 14241-1:2013 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners
ISO 1183:1987 Plastics Methods for determining the density and relative density of non-cellular plastics
ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
EN 14459:2015 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment
EN 1487:2014 Building valves - Hydraulic safety groups - Tests and requirements
EN 437:2003+A1:2009 Test gases - Test pressures - Appliance categories
EN 125:2010+A1:2015 Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices
ISO 7619:1997 Rubber Determination of indentation hardness by means of pocket hardness meters
EN 126:2012 Multifunctional controls for gas burning appliances
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
CEN/TR 1749:2014 European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)
CR 1404:1994 Determination of emissions from appliances burning gaseous fuels during type-testing
EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
EN 60335-2-102:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
ISO 6914:2013 Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress relaxation in tension
EN 14471:2013+A1:2015 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
ISO 179-1:2010 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
ISO 3166-1:2013 Codes for the representation of names of countries and their subdivisions Part 1: Country codes
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
EN 1856-1:2009 Chimneys - Requirements for metal chimneys - Part 1: System chimney products
EN 549:1994 Rubber materials for seals and diaphragms for gas appliances and gas equipment
ISO 301:2006 Zinc alloy ingots intended for castings
EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
ISO 178:2010 Plastics Determination of flexural properties
ISO 9969:2016 Thermoplastics pipes Determination of ring stiffness
EN 513:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering
EN 88-1:2011+A1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN 573-1:2004 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system
ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles
ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
ISO 2781:2008 Rubber, vulcanized or thermoplastic Determination of density

View more information
£147.34
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.