UNE-EN ISO 683-17:2015
Current
The latest, up-to-date edition.
Hardcopy , PDF
Spanish, Castilian, English
07-10-2015
1 Scope
2 Normative References
3 Terms and Definitions
4 Ordering and Designation
5 Requirements
6 Inspection, Testing and Conformance of Products
7 Marking
Annex A (normative) Supplementary or Special Requirements
Annex B (informative) Content of Microscopic Non-Metallic
Inclusions
Annex C (informative) Designations of Comparable Steels
Bibliography
Covers products and heat-treatment conditions shown in Table 1 and surface conditions in Table 2, and provides technical delivery requirements for five types of wrought ball and roller bearing steels detailed in Table 3. These being, case-hardening, through-hardening, induction-hardening (alloyed/unalloyed), stainless and high-temperature bearing steels.
Committee |
CTN 36
|
DevelopmentNote |
Supersedes UNE 36027. (07/2003)
|
DocumentType |
Standard
|
Pages |
32
|
PublisherName |
Asociacion Espanola de Normalizacion
|
Status |
Current
|
Supersedes |
Standards | Relationship |
ISO 683-17:2014 | Identical |
NF EN ISO 683-17 : 2015 | Identical |
NBN EN ISO 683-17 : 2014 | Identical |
NEN EN ISO 683-17 : 2014 | Identical |
NS EN ISO 683-17 : 2014 | Identical |
I.S. EN ISO 683-17:2014 | Identical |
SN EN ISO 683-17 : 2014 | Identical |
UNI EN ISO 683-17 : 2014 | Identical |
BS EN ISO 683-17:2014 | Identical |
EN ISO 683-17:2014 | Identical |
DIN EN ISO 683-17:2015-02 | Identical |
ONORM EN ISO 683-17 : 2015 | Identical |
ISO 404:2013 | Steel and steel products — General technical delivery requirements |
EN 10247:2017 | Micrographic examination of the non-metallic inclusion content of steels using standard pictures |
ISO 5949:1983 | Tool steels and bearing steels Micrographic method for assessing the distribution of carbides using reference photomicrographs |
ISO 6929:2013 | Steel products — Vocabulary |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
SAC GB/T 28417 : 2012 | CARBON BEARING STEEL |
SAC GB/T 3203 : 1982 | CARBURIZING STEELS FOR BEARING |
ISO/TS 4949:2016 | Steel names based on letter symbols |
EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
ISO/TR 9769:1991 | Steel and iron Review of available methods of analysis |
ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
ISO 4969:2015 | Steel Etching method for macroscopic examination |
ISO 16124:2015 | Steel wire rod — Dimensions and tolerances |
ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
ISO 22034-2:2016 | Steel wire and wire products Part 2: Tolerances on wire dimensions |
ISO 1035-3:1980 | Hot-rolled steel bars — Part 3: Dimensions of flat bars |
ISO 1035-4:1982 | Hot-rolled steel bars Part 4: Tolerances |
ISO 3763:1976 | Wrought steels — Macroscopic methods for assessing the content of non-metallic inclusions |
ISO 4948-1:1982 | Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
SAC GB/T 18254 : 2002 | HIGH-CARBON CHROMIUM BEARING STEEL |
EN 10278:1999 | Dimensions and tolerances of bright steel products |
ISO 3887:2003 | Steels Determination of depth of decarburization |
ISO 1035-1:1980 | Hot-rolled steel bars — Part 1: Dimensions of round bars |
ISO 10474:2013 | Steel and steel products — Inspection documents |
EN 10204:2004 | Metallic products - Types of inspection documents |
ISO 1035-2:1980 | Hot-rolled steel bars — Part 2: Dimensions of square bars |
ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
ISO 4948-2:1981 | Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
SAC GB/T 3086 : 2008 | HIGH CARBON CHROMIUM STAINLESS BEARING STEELS |
ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
ISO 9443:1991 | Heat-treatable and alloy steels Surface quality classes for hot-rolled round bars and wire rods Technical delivery conditions |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.