|
IEC 60811-501:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
|
|
IEC 60811-509:2012+AMD1:2017 CSV
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
|
|
IEC 60811-507:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials
|
|
IEC 60811-506:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths
|
|
IEC 60228:2004
|
Conductors of insulated cables
|
|
IEC 60684-2:2011
|
Flexible insulating sleeving - Part 2: Methods of test
|
|
IEC 60502-2:2014 RLV
|
Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) – Part 2: Cables for rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV)
|
|
IEC 60811-505:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths
|
|
IEC 60331-2:2009
|
Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm
|
|
IEC 60811-504:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
|
|
IEC 60331-11:1999+AMD1:2009 CSV
|
Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C
|
|
IEC 60811-203:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions
|
|
IEC 60754-1:2011
|
Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
|
|
IEC 60811-401:2012+AMD1:2017 CSV
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
|
|
IEC 60811-409:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
|
|
IEC 60811-202:2012+AMD1:2017 CSV
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
|
|
IEC 60332-1-2:2004+AMD1:2015 CSV
|
Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame
|
|
IEC 60230:1966
|
Impulse tests on cables and their accessories
|
|
IEC 60092-353:2016
|
Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV
|
|
IEC 60754-2:2011
|
Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
|
|
IEC 60811-508:2012+AMD1:2017 CSV
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
|
|
IEC 62230:2006+AMD1:2013 CSV
|
Electric cables - Spark-test method
|
|
IEC 60331-21:1999
|
Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV
|
|
ISO 7989-2:2007
|
Steel wire and wire products Non-ferrous metallic coatings on steel wire Part 2: Zinc or zinc-alloy coating
|
|
IEC 60050-461:2008
|
International Electrotechnical Vocabulary (IEV) - Part 461: Electric cables
|
|
IEC 60811-404:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths
|
|
IEC 60331-1:2009
|
Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm
|
|
IEC 60092-354:2014
|
Electrical installations in ships - Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U<sub>m</sub> = 7,2 kV) up to 30 kV (U<sub>m</sub> = 36 kV)
|
|
IEC 60811-201:2012+AMD1:2017 CSV
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
|
|
IEC 60332-3-22:2000+AMD1:2008 CSV
|
Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
|
|
IEC 61034-2:2005+AMD1:2013 CSV
|
Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements
|
|
IEC 61034-1:2005+AMD1:2013 CSV
|
Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
|
|
IEC 60811-403:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds
|
|
IEC 60885-2:1987
|
Electrical test methods for electric cables. Part 2: Partial discharge tests
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.