Name: UNI EN 12753 : 2010
Brand: UNI

THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS

Published date

08-07-2010

Publisher

Ente Nazionale Italiano di Unificazione (UNI)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
6 Verification of the safety requirements and/or protective
  measures
7 Information for use
Annex A (informative) - Schematic views of thermal cleaning
  systems
Annex B (informative) - Temperature dependency of LEL
Annex C (informative) - Operating parameters, conditions for
  use and measurement methods
Annex D (informative) - Guidelines for thermal cleaning
  systems operating at increased concentrations
Annex E (informative) - References to national exposure
  limit values
Annex F (normative) - Classification of material's reaction
  to the fire - national standards
Annex G (informative) - Relation between categories and zones
Annex ZA (informative) - Relationship between this European
  Standard and the Essential Requirements of EU Directive
  2006/42/EC
Bibliography

Describes thermal cleaning systems for exhaust gas from surface treatment equipment/systems as given below in which the concentration of exhaust gas to be cleaned (for the purpose of this European Standard, named "process gas") at the inlet to the thermal cleaning system is safely limited within the concentration ranges.

Committee	CT 42
DocumentType	Standard
PublisherName	Ente Nazionale Italiano di Unificazione (UNI)
Status	Current
Supersedes	UNI EN 12753 : 2005

Standards	Relationship
UNE-EN 12753:2006	Identical
NF EN 12753 : 2005 + A1 2010	Identical
NS EN 12753 : 2005 + A1 2010	Identical
BS EN 12753 : 2005	Identical
DIN EN 12753:2011-02	Identical
EN 12753:2005+A1:2010	Identical
NEN EN 12753 : 2005 + A1 2010	Identical
I.S. EN 12753:2005	Identical
NBN EN 12753 : 2005 + A1 2010	Identical

ISO 11202:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
EN 1127-1:2011	Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 676:2003+A2:2008/AC:2008	AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
EN 1539:2015	Dryers and ovens, in which flammable substances are released - Safety requirements
IEC 60079-1:2014 RLV	Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
EN 746-1:1997+A1:2009	Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
IEC 60079-10:2002	Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
EN 61508-1:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
EN 746-2:2010	Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
EN 60079-1:2014	Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
EN 13113:2002+A1:2010	Tannery machines - Roller coating machines - Safety requirements
EN 971-1 : 1996	PAINTS AND VARNISHES - TERMS AND DEFINITIONS FOR COATING MATERIALS - PART 1: GENERAL TERMS
IEC 60079-19:2010+AMD1:2015 CSV	Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
EN 60079-0:2012/A11:2013	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
EN 50020:2002	Electrical apparatus for potentially explosive atmospheres - Intrinsic safety 'i'
EN 60079-15:2010	Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
EN 13463-1:2009	Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
EN 12874 : 2001	FLAME ARRESTERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND LIMITS FOR USE
EN 13478:2001+A1:2008	Safety of machinery - Fire prevention and protection
EN 61779-4:2000	Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100 % lower explosive limit
IEC 60204-1:2016	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60079-18:2014 RLV	Explosive atmospheres - Part 18: Equipment protection by encapsulation “m”
EN 1050 : 1996	SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN 50017:1998	Electrical apparatus for potentially explosive atmospheres - Powder filling "q"
EN 12215:2004+A1:2009	Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
EN ISO 11201:2010	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN 60519-1:2015	Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
ISO 11690-2:1996	Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 2: Noise control measures
EN 619:2002+A1:2010	Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
EN 12921-1:2005+A1:2010	Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements
IEC 61779-4:1998	Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating up to 100% lower explosive limit
EN 1010-1:2004+A1:2010	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
EN ISO 12100-1:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
NFPA 86 : 2015	OVENS AND FURNACES
EN 60079-25:2010/AC:2013	EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
EN 746-3:1997+A1:2009	Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases
EN 12921-3:2005+A1:2008	Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids
ISO 11690-1:1996	Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 1: Noise control strategies
IEC 60079-25:2010	Explosive atmospheres - Part 25: Intrinsically safe electrical systems
IEC 60079-0:2011	Explosive atmospheres - Part 0: Equipment - General requirements
EN 60079-10:2003	Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
ISO 12100-2:2003	Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
EN ISO 12100-2:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
IEC 60079-14:2013	Explosive atmospheres - Part 14: Electrical installations design, selection and erection
EN 61779-1 : 2000 AMD 11 2004	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
EN ISO 11690-2 : 1996	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE WORKPLACES CONTAINING MACHINERY - NOISE CONTROL MEASURES
EN 60079-14:2014/AC:2016	EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
EN 954-1 : 1996	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
EN 12198-1:2000+A1:2008	Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles
PREN 14986 : DRAFT 2014	DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
ISO 12100-1:2003	Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN 50073:1999	Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen
EN 50015:1998	Electrical apparatus for potentially explosive atmospheres - Oil immersion "o"
EN 13463-5:2011	Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
IEC 61508-1:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
IEC 61779-1:1998	Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods
EN ISO 11202:2010	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
IEC 60519-1:2015	Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
ISO 11201:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
EN ISO 11690-1 : 1996	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE WORKPLACES CONTAINING MACHINERY - NOISE CONTROL STRATEGIES
IEC 60079-15:2010	Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
EN 60204-1 : 2006 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 60079-2:2014/AC:2015	EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014)