• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

UNI EN 14566 : 2009

Current
Current

The latest, up-to-date edition.

MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
Published date

28-10-2009

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
  4.1 Reaction to fire
  4.2 Flexural strength (bending behaviour)
  4.3 Release of (regulated) dangerous substances
  4.4 Additional requirements
5 Test methods
  5.1 General
  5.2 Number of samples
  5.3 Dimensional measurement
  5.4 Determination of withdrawal force
  5.5 Determination of bending behaviour
  5.6 Drilling time test
  5.7 Determination of the thickness and/or mass of coating
  5.8 Determination of pull-through force
6 Evaluation of conformity
  6.1 General
  6.2 Type testing
  6.3 Factory production control (FPC)
7 Designation
  7.1 Nails
  7.2 Screws
  7.3 Staples
8 Marking, labelling and packaging
Annex A (informative) - Examples of fixing types
Annex B (informative) - Sampling procedure for testing
Annex ZA (informative) - Clauses of this European Standard
         addressing the provisions of the EU
         Construction Products Directive
Bibliography

Describes the characteristics and performance of mechanical fasteners, including nails, screws and staples, intended to be used for the fixing of gypsum plasterboard, gypsum boards with fibrous reinforcement, products from secondary processing and suitable ancillary products as shown in Figure 2, to timber and metal, as appropriate, in building construction works.

Committee
CT 33
DocumentType
Test Method
PublisherName
Ente Nazionale Italiano di Unificazione (UNI)
Status
Current
Supersedes

UNI 11555 : 2014 NON-REGULATED PROFESSIONS - INSTALLERS OF PLASTERBOARDS SYSTEMS - KNOWLEDGE, SKILL AND COMPETENCE REQUIREMENTS

EN 520:2004+A1:2009 Gypsum plasterboards - Definitions, requirements and test methods
EN ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
EN 13915:2017 Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods
EN 14209:2017 Preformed plasterboard cornices - Definitions, requirements and test methods
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
EN 13950:2014 Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods
EN 14496:2017 Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods
EN ISO 9227:2017 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
ISO 12777-2:2000 Methods of test for pallet joints Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples
EN 10327:2004 Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions
EN 15283-2:2008+A1:2009 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards
EN 15283-1:2008+A1:2009 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement
EN 10143:2006 (edition 2) Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO 9001:2015 Quality management systems — Requirements
EN 10230-1:1999 Steel wire nails - Part 1: Loose nails for general applications
EN 338:2016 Structural timber - Strength classes
EN 10083-1:2006 Steels for quenching and tempering - Part 1: General technical delivery conditions
ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
EN 10083-2:2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
EN 10084:2008 Case hardening steels - Technical delivery conditions
EN ISO 12777-2 : 2000 METHODS OF TEST FOR PALLET JOINTS - PART 2: DETERMINATION OF WITHDRAWAL AND HEAD PULL-THROUGH RESISTANCE OF PALLET NAILS AND STAPLES
ISO 12777-3:2002 Methods of test for pallet joints Part 3: Determination of strength of pallet joints
EN 10083-3:2006/AC:2008 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
EN ISO 12777-3 : 2002 METHODS OF TEST FOR PALLET JOINTS - PART 3: DETERMINATION OF STRENGTH OF PALLET JOINTS
EN 13963:2014 Jointing materials for gypsum boards - Definitions, requirements and test methods
EN 14195:2014 Metal framing components for gypsum board systems - Definitions, requirements and test methods
EN 14353:2017 Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.