• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

UNI EN 15564 : 2009

Current
Current

The latest, up-to-date edition.

PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS
Published date

28-01-2009

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
  4.1 General
  4.2 Constituent materials
       4.2.1 Aggregates
       4.2.2 Filler
       4.2.3 Resin
  4.3 Other materials
  4.4 Properties of resin-bound concrete
       4.4.1 General
       4.4.2 Apparent density, water absorption
              and water permeability
       4.4.3 Strength
       4.4.4 Surface hardness
       4.4.5 Slipperiness behaviour
       4.4.6 Abrasion resistance
       4.4.7 Thermal shock resistance
       4.4.8 Impact resistance
       4.4.9 Linear thermal expansion coefficient
       4.4.10 Chemical resistance
       4.4.11 Freeze and thaw resistance
       4.4.12 Thermal conductivity
       4.4.13 Reaction to fire
5 Tests
  5.1 Constituent materials
       5.1.1 Aggregates
       5.1.2 Filler
       5.1.3 Resin
  5.2 Test specimens
       5.2.1 General
       5.2.2 Cast test specimens
  5.3 Apparent density, water absorption and
       water permeability
  5.4 Strength
  5.5 Surface hardness
  5.6 Slipperiness behaviour
  5.7 Abrasion resistance
  5.8 Thermal shock resistance
  5.9 Impact resistance
  5.10 Linear thermal expansion coefficient
  5.11 Chemical resistance
  5.12 Freeze and thaw resistance
  5.13 Thermal conductivity
  5.14 Reaction to fire
6 Evaluation of conformity
  6.1 General
  6.2 Initial type tests
  6.3 Factory production control
       6.3.1 General
       6.3.2 Organisation
       6.3.3 Control system
       6.3.4 Document control
       6.3.5 Process control
       6.3.6 Inspection and testing
       6.3.7 Non-conforming products
       6.3.8 Indirect or alternative test method
Annex A (normative) - Determination of the viscosity
        of the resin
      A.1 Aim
      A.2 Method
      A.3 Apparatus
      A.4 Procedure
          A.4.1 Preliminary operations
          A.4.2 Test procedure
      A.5 Results
Annex B (normative) - Determination of the reactivity
        of the resin
      B.1 Aim
      B.2 Method
      B.3 Apparatus
      B.4 Procedure
      B.5 Results
Annex C (normative) - Determination of the surface
        hardness
      C.1 Aim
      C.2 Method
      C.3 Apparatus
      C.4 Procedure
          C.4.1 Calibration of the hardness tester
          C.4.2 Test procedure
      C.5 Results
Bibliography

Describes common requirements for resin-bound concrete used in the fabrication of precast concrete products.

Committee
CT 21
DocumentType
Test Method
PublisherName
Ente Nazionale Italiano di Unificazione (UNI)
Status
Current

Standards Relationship
EN 15564:2008 Identical

EN 14617-4:2012 Agglomerated stone - Test methods - Part 4: Determination of the abrasion resistance
EN 14617-11:2005 Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient
EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
EN ISO 10456:2007/AC:2009 BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
ISO 3219:1993 Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate
EN 1097-5:2008 Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
EN ISO 178:2010/A1:2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
EN 933-10:2009 Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving)
EN 14617-9:2005 Agglomerated stone - Test methods - Part 9: Determination of impact resistance
EN 14618:2009 Agglomerated stone - Terminology and classification
EN 13823:2010+A1:2014 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
EN ISO 9371 : 1995 PLASTICS - PHENOLIC RESINS IN THE LIQUID STATE OR IN SOLUTION - DETERMINATION OF VISCOSITY
ISO 9371:1990 Plastics Phenolic resins in the liquid state or in solution Determination of viscosity
ISO 2555:1989 Plastics Resins in the liquid state or as emulsions or dispersions Determination of apparent viscosity by the Brookfield Test method
EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN 14617-15:2005 Agglomerated stone - Test methods - Part 15: Determination of compressive strength
EN 14889-2:2006 Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 12620:2002+A1:2008 Aggregates for concrete
EN 14889-1:2006 Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity
EN 12664:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester
EN ISO 3219:1994 Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993)
EN ISO 584 : 1997 PLASTICS - UNSATURATED POLYESTER RESINS - DETERMINATION OF REACTIVITY AT 80 DEGREE C (CONVENTIONAL METHOD)
ISO 10456:2007 Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values
ISO 9001:2015 Quality management systems — Requirements
EN 14617-5:2012 Agglomerated stone - Test methods - Part 5: Determination of freeze and thaw resistance
EN 14617-6:2012 Agglomerated stone - Test methods - Part 6: Determination of thermal shock resistance
ISO 584:1982 Plastics — Unsaturated polyester resins — Determination of reactivity at 80 degrees C (conventional method)
ISO 178:2010 Plastics Determination of flexural properties
EN 14617-1:2013 Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption
EN 14617-10:2012 AGGLOMERATED STONE - TEST METHODS - PART 10: DETERMINATION OF CHEMICAL RESISTANCE

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.