UNI EN ISO 3758 : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
24-01-2024
14-06-2012
Foreword
Introduction
1 Scope
2 Terms and definitions
3 Description and definition of symbols
4 Application and use of symbols
Annex A (informative) - Characteristics and available test
methods for the correct selection of care symbols
Annex B (informative) - Regional and national practices in
care labelling
Annex C (informative) - Examples of additional wording
Bibliography
Specifies: - a system of graphic symbols, intended for use in the marking of textile articles, and for providing information on the most severe treatment that does not cause irreversible damage to the article during the textile care process, and - the use of these symbols in care labelling.
| Committee |
CT 46
|
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN ISO 3758:2012 | Identical |
| NBN EN ISO 3758 : 2012 | Identical |
| DIN EN ISO 3758:2013-12 | Identical |
| UNE-EN ISO 3758:2012 | Identical |
| ISO 3758:2012 | Identical |
| NS EN ISO 3758 : 2012 | Identical |
| NF EN ISO 3758 : 2012 | Identical |
| BS EN ISO 3758:2012 | Identical |
| I.S. EN ISO 3758:2012 | Identical |
| SN EN ISO 3758:2012 | Identical |
| NEN EN ISO 3758 : 2012 | Identical |
| ONORM EN ISO 3758 : 2012 | Identical |
| UNI 11007 : 2009 | REQUIREMENTS AND INDICATIONS FOR LABELLING OF FUR GOODS |
| UNI 11212 : 2006 | LEATHER - TERMS, DEFINITIONS AND SYMBOLS |
| ISO 105-E01:2013 | Textiles — Tests for colour fastness — Part E01: Colour fastness to water |
| ISO 13936-2:2004 | Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 2: Fixed load method |
| ISO 3175-2:2010 | Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene |
| ISO 105-N01:1993 | Textiles Tests for colour fastness Part N01: Colour fastness to bleaching: Hypochlorite |
| ISO 12945-2:2000 | Textiles Determination of fabric propensity to surface fuzzing and to pilling Part 2: Modified Martindale method |
| ISO 105-A03:1993 | Textiles Tests for colour fastness Part A03: Grey scale for assessing staining |
| ISO 6330:2012 | Textiles Domestic washing and drying procedures for textile testing |
| ISO 13936-3:2005 | Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 3: Needle clamp method |
| ISO 2411:2017 | Rubber- or plastics-coated fabrics — Determination of coating adhesion |
| ISO 7768:2009 | Textiles Test method for assessing the smoothness appearance of fabrics after cleansing |
| ISO 12945-1:2000 | Textiles Determination of fabric propensity to surface fuzzing and to pilling Part 1: Pilling box method |
| ISO 30023:2010 | Textiles Qualification symbols for labelling workwear to be industrially laundered |
| ISO 105-D01:2010 | Textiles Tests for colour fastness Part D01: Colour fastness to drycleaning using perchloroethylene solvent |
| ISO 15487:2009 | Textiles Method for assessing appearance of apparel and other textile end products after domestic washing and drying |
| ISO 105-X11:1994 | Textiles — Tests for colour fastness — Part X11: Colour fastness to hot pressing |
| ISO 3759:2011 | Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change |
| ISO 3175-1:2010 | Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 1: Assessment of performance after cleaning and finishing |
| IEC 60311:2016 | Electric irons for household or similar use - Methods for measuring performance |
| ISO 3175-3:2003 | Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents |
| ISO 3175-4:2003 | Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning |
| ISO 105-D02:2016 | Textiles Tests for colour fastness Part D02: Colour fastness to rubbing: Organic solvents |
| ISO 7770:2009 | Textiles Test method for assessing the smoothness appearance of seams in fabrics after cleansing |
| ISO 12947-4:1998 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 4: Assessment of appearance change |
| ISO 105-X12:2016 | Textiles Tests for colour fastness Part X12: Colour fastness to rubbing |
| ISO 13936-1:2004 | Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 1: Fixed seam opening method |
| ISO 105-A01:2010 | Textiles Tests for colour fastness Part A01: General principles of testing |
| ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ISO 105-C09:2001 | Textiles — Tests for colour fastness — Part C09: Colour fastness to domestic and commercial laundering — Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator |
| ISO 7769:2009 | Textiles Test method for assessing the appearance of creases in fabrics after cleansing |
| ISO 105-C06:2010 | Textiles Tests for colour fastness Part C06: Colour fastness to domestic and commercial laundering |
| ISO 105-C08:2010 | Textiles Tests for colour fastness Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator |
| ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.