VDI 3803-1 : 2010 COR 2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
07-05-2020
German - English
01-10-2010
Preliminary note
Introduction
1. Scope
2. Normative references
3. Abbreviations
4. General requirements
5. Technical requirements for AHUs
6. Technical requirements for decentral components
of HVAC-systems
7. Control and regulation requirements
8. Commissioning requirements
Annex A - Designation of types of air according to EN 13779
Annex B - Quality of water in HVAC systems
Bibliography
Describes the planning and installation of central HVAC systems in which the components (e. g. induction units) are connected to a central AHU by an air duct system.
DevelopmentNote |
Supersedes VDI 3803. (02/2010)
|
DocumentType |
Standard
|
Pages |
2
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
VDI 6022 Blatt 1.1:2012-08 | Ventilation and indoor-air quality - Hygiene requirements for ventilation and air-conditioning systems and units - Checking of ventilation and air-conditioning systems (VDI Ventilation Code of Practice) |
VDI 6022 Blatt 1.2:2014-06 | Ventilation and indoor-air quality - Hygiene requirements for ventilation and air-conditioning systems and units - Requirements for underground components (VDI Ventilation Code of Practice) |
VDI 4250 Blatt 2:2015-11 | Bioaerosols and biological agents - Environmental health assessment of bioaerosols in ambient air - Risk assessment for aerosols containing Legionella |
DIN 1946-7:2009-07 | Ventilation and air conditioning - Part 7: Ventilation systems in laboratories |
VDI 2082:2010-07 | Air-conditioning - Sales outlets (VDI ventilation code of practice) |
VDI 2052 Blatt 1:2017-04 | Air conditioning - Kitchens (VDI Ventilation Code of Practice) |
VDI 2050 Blatt 4:2011-11 | Requirements for mechanical equipment rooms - Ventilation and air-conditioning |
VDI 2262 Blatt 3:2011-06 | Workplace air - Reduction of exposure to air pollutants - Ventilation technical measures |
VDI 2050 Blatt 1:2013-11 | Requirements for technical equipment rooms - Technical bases for planning and execution |
VDI 6032 Blatt 1:2015-05 | Ventilation and indoor-air quality in vehicles - Hygiene requirements for ventilation and air-conditioning systems |
VDI 3803 Blatt 4:2012-09 | Air-conditioning, system requirements - Air filter systems (VDI Ventilation Code of Practice) |
VDI 6004 Blatt 3:2009-05 | Protection for building services - Vandalism or destruction of property |
VDI 2053 Blatt 1:2014-12 | Air conditioning - Car parks - Exhaust ventilation (VDI Ventilation Code of Practice) |
VDI 3803 Blatt 5:2013-04 | Air-conditioning, system requirements - Heat recovery systems (VDI Ventilation Code of Practice) |
VDI 3810 Blatt 2:2010-05 | Operation and maintenance of building installations - Sanitary systems |
VDI 3802 Blatt 1:2014-09 | Air conditioning systems for factories |
VDI 2083 Blatt 4.2:2011-04 | Cleanroom technology - Energy efficiency |
VDI 2050 Blatt 2:2011-11 | Requirements for mechanical equipment rooms - Sanitary engineering |
VDI 3476 Blatt 2:2010-01 | Waste gas cleaning - Catalytic waste gas cleaning methods - Oxidative processes |
VDI 3803 Blatt 2:2017-09 (Draft) | Ventilation and air conditioning - Structural and technical principles - Decentralized ventilation units (VDI ventilation code of practice) |
VDI 2087 : 2006 COR 2008 | Air ducts - Operating and construction fundamentals - Corrigendum concerning guideline VDI 2087:2006-12 |
EN 1886:2007 | Ventilation for buildings - Air handling units - Mechanical performance |
EN 15251:2007 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
DIN V 4133:2007-07 | FREE-STANDING STEEL STACKS |
DIN EN 12237:2003-07 | VENTILATION FOR BUILDINGS - DUCTWORK - STRENGTH AND LEAKAGE OF CIRCULAR SHEET METAL DUCTS |
EN 1507:2006 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
EN 13053:2006+A1:2011 | Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
EN 1505:1997 | Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross section - Dimensions |
VDI 6023 Blatt 1:2006-07 | Hygiene for drinking water supply systems - Requirements for planning, design, operation, and maintenance |
VDI 6026 Blatt 1:2008-05 | Documentation in the building services - Contents and format of planning, execution and review documents |
EN 13403:2003 | Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards |
VDI 2050 Blatt 1:2013-11 | Requirements for technical equipment rooms - Technical bases for planning and execution |
EN ISO 14121-1:2007 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
VDI 2050 Blatt 4:2011-11 | Requirements for mechanical equipment rooms - Ventilation and air-conditioning |
DIN EN 1505:1998-02 | VENTILATION FOR BUILDINGS - SHEET METAL AIR DUCTS AND FITTINGS WITH RECTANGULAR CROSS-SECTION - DIMENSIONS |
EN 12101-3:2015 | Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) |
VDI 3814 Blatt 1:2009-11 | Building automation and control systems (BACS) - System basics |
VDI 6028 Blatt 4.1:2006-02 | Assesment criteria for building services - Requirement profiles and valuation criteria for ventilation and air conditioning |
EN 12599:2012 | Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems |
VDI 6004 Blatt 2:2007-07 | Protection of building services - Lightning protection systems and surge protection |
ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
DIN EN 12599:2013-01 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
DIN EN 1751:2014-06 | VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPER AND VALVES |
EN 1506:2007 | Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions |
DIN EN 15251:2012-12 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
EN 12237:2003 | Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts |
VDI 2081 Blatt 1:2001-07 | Noise generation and noise reduction in air-conditioning systems |
VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
VDI 6004 Blatt 3:2009-05 | Protection for building services - Vandalism or destruction of property |
VDI 2071:1997-12 | Heat recovery in heating, ventilation and air conditioning plants |
DIN EN 12236:2002-04 | VENTILATION FOR BUILDINGS - DUCTWORK - HANGERS AND SUPPORTS, REQUIREMENTS FOR STRENGTH |
VDI 3819 Blatt 1:2016-10 | Fire protection for buildings - Fundamentals for building services - Terminology, acts, ordinances, technical rules |
EN 308:1997 | Heat exchangers - Test procedures for establishing performance of air to air and flue gases heat recovery devices |
VDI 3525:2007-01 | Automation and control of air-conditioning systems - Examples |
EN 12236:2002 | Ventilation for buildings - Ductwork hangers and supports - Requirements for strength |
VDI 3801:2000-06 | Operating of air-conditioning systems |
DIN EN ISO 14121-1:2007-12 | SAFETY OF MACHINERY - RISK ASSESSMENT - PART 1: PRINCIPLES |
ISO 7730:2005 | Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
DIN EN 13403:2003-08 | VENTILATION FOR BUILDINGS - NON-METALLIC DUCTS - DUCTWORK MADE FROM INSULATION DUCTBOARDS |
EN 1751:2014 | Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves |
DIN EN 12101-3:2015-12 | SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS) |
DIN EN 1506:2007-09 | Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions |
EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
VDI 6035:2009-09 | Ventilation and air-conditioning technology - Decentralized ventilation systems - Wall-mounted air-conditioners (VDI ventilation code of practice) |
VDI 3804:2009-03 | Air-conditioning - Office buildings (VDI ventilation code of practice) |
DIN EN 1507:2006-07 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
DIN EN 13501-1:2010-01 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS |
EN 12097:2006 | Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.