• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

VDI 3823 Blatt 4:2006-11

Current
Current

The latest, up-to-date edition.

Vacuum coating quality assurance - Testing of vacuum coated plastics
Available format(s)

Hardcopy , PDF

Language(s)

German - English

Published date

01-11-2006

Preliminary note
1 Scope
2 Testing plans
3 Testing procedures
Bibliography

In this guideline the methods of testing vacuum coated plastic parts that have become established practice for manufacturers and users will be presented.

DocumentType
Standard
Pages
22
PublisherName
Verlag des Vereins Deutscher Ingenieure
Status
Current
Supersedes

VDI 3823 Blatt 3:2006-11 Vacuum coating quality assurance - Production sequence and job steps
VDI 3823 Blatt 2:2006-11 Vacuum coating quality assurance - Demands on plastics to be coated
VDI 3823 Blatt 1:2006-11 Vacuum coating quality assurance - Characteristics, applications and procedures
VDI 2840:2005-11 Carbon films - Basic knowledge, coating types and properties

DIN 50021:1988-06 SPRAY TESTS WITH DIFFERENT SODIUM CHLORIDE SOLUTIONS
DIN EN ISO 3231:1998-02 Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993)
VDI 3823 Blatt 3:2006-11 Vacuum coating quality assurance - Production sequence and job steps
DIN 5033-1:2009-05 COLORIMETRY - PART 1: BASIC TERMS OF COLORIMETRY
MIL-STD-285 Base Document:1956 ATTENUATION MEASUREMENTS FOR ENCLOSURES, ELECTROMAGNETIC SHIELDING, FOR ELECTRONIC TEST PURPOSES, METHOD OF
ISO 10993-4:2017 Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood
DIN ISO 9022-2:2015-06 OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 2: COLD, HEAT AND HUMIDITY (ISO 9022-2:2015)
EN ISO 15106-3:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method (ISO 15106-3:2003)
EN ISO 10993-5:2009 Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity (ISO 10993-5:2009)
DIN 5033-4:1992-07 COLORIMETRY; SPECTROPHOTOMETRIC METHOD
ASTM D 2463 : 2015 : REDLINE Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
EN ISO 3231:1997 Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993)
ISO 9220:1988 Metallic coatings Measurement of coating thickness Scanning electron microscope method
EN ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017)
ISO 9022-2:2015 Optics and photonics Environmental test methods Part 2: Cold, heat and humidity
DIN EN ISO 3497:2001-12 METALLIC COATINGS - MEASUREMENT OF COATING THICKNESS - X-RAY SPECTROMETRIC METHODS
ASTM D 4541 : 2017 : REDLINE Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
EN ISO 3543:2000/AC:2006 Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000/Cor.1:2003)
ISO 9211-4:2012 Optics and photonics Optical coatings Part 4: Specific test methods
ISO 3543:2000 Metallic and non-metallic coatings Measurement of thickness Beta backscatter method
EN ISO 3497 : 2000 METALLIC COATINGS - MEASUREMENTS OF COATING THICKNESS - X-RAY SPECTROMETRIC METHODS
EN ISO 2409:2013 Paints and varnishes - Cross-cut test (ISO 2409:2013)
ISO 14676:1997 Adhesives — Evaluation of the effectiveness of surface treatment techniques for aluminium — Wet-peel test by floating-roller method
ISO 4578:1997 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
ISO 1463:2003 Metallic and oxide coatings Measurement of coating thickness Microscopical method
ISO 14155-1:2003 Clinical investigation of medical devices for human subjects Part 1: General requirements
ISO 3882:2003 Metallic and other inorganic coatings — Review of methods of measurement of thickness
DIN EN ISO 2360:2016-05 (Draft) NON-CONDUCTIVE COATINGS ON NON-MAGNETIC ELECTRICALLY CONDUCTIVE BASE METALS - MEASUREMENT OF COATING THICKNESS - AMPLITUDE-SENSITIVE EDDY-CURRENT METHOD (ISO 2360:2017)
EN ISO 10993-10:2013 Biological evaluation of medical devices - Part 10: Tests for irritation and skin sensitization (ISO 10993-10:2010)
EN ISO 10993-4:2017 Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood (ISO 10993-4:2017)
VDI 3823 Blatt 1:2006-11 Vacuum coating quality assurance - Characteristics, applications and procedures
DIN 5033-5:1981-01 COLORIMETRY BY VISUAL MATCHING
DIN 53754:1977-06 TESTING OF PLASTICS; DETERMINATION OF ABRASION, ABRASIVE DISK METHOD
EN ISO 9220 : 1994 METALLIC COATINGS - MEASUREMENT OF COATING THICKNESS - SCANNING ELECTRON MICROSCOPE METHOD
EN ISO 3882:2003 Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003)
DIN 10050-9:1973-12 TESTING OF BUTTER WRAPPERS; DETERMINATION OF TRANSMISSION
DIN EN ISO 2409:2013-06 PAINTS AND VARNISHES - CROSS-CUT TEST (ISO 2409:2013)
EN 1071-1 : 2003 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 1: DETERMINATION OF COATING THICKNESS BY CONTACT PROBE FILOMETER
DIN EN ISO 14155-1:2009-11 CLINICAL INVESTIGATION OF MEDICAL DEVICES FOR HUMAN SUBJECTS - PART 1: GENERAL REQUIREMENTS
ISO 15106-3:2003 Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 3: Electrolytic detection sensor method
DIN EN ISO 10993-5:2009-10 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 5: TESTS FOR IN VITRO CYTOTOXICITY
ISO 4624:2016 Paints and varnishes — Pull-off test for adhesion
DIN 53380-1:2000-07 Determining the gas transmission rate of plastic film by the volumetric method
DIN 58196-6:1995-07 OPTICAL COATINGS - PART 6: TESTING OF THE ADHESION WITH A TAPE (TAPE TEST)
ISO 10993-10:2010 Biological evaluation of medical devices Part 10: Tests for irritation and skin sensitization
DIN 52348:1985-02 TESTING OF GLASS AND PLASTICS; ABRASION TEST; SAND TRICKLING METHOD
DIN 5033-6:1976-08 COLORIMETRY; TRISTIMULUS METHOD
ISO 3497:2000 Metallic coatings Measurement of coating thickness X-ray spectrometric methods
DIN EN ISO 10993-4:2016-02 (Draft) BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 4: SELECTION OF TESTS FOR INTERACTIONS WITH BLOOD (ISO 10993-4:2017)
ASTM G 99 : 2017 : REDLINE Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
DIN 53380-3:1998-07 Testing of plastics - Determination of gas transmission rate - Part 3: Oxygen-specific carrier gas method for testing of plastic films and plastics mouldings
ISO 10993-1:2009 Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process
EN ISO 4624:2016 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016)
ASTM F 390 : 2011 : REDLINE Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
VDI 3823 Blatt 2:2006-11 Vacuum coating quality assurance - Demands on plastics to be coated
DIN 53494:1984-05 ELECTROPLATED COATINGS; TESTING OF ELECTROPLATED PLASTIC ARTICLES; DETERMINATION OF PEEL STRENGTH
DIN EN ISO 10993-10:2014-10 Biological evaluation of medical devices - Part 10: Tests for irritation and skin sensitization (ISO 10993-10:2010)
ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
DIN EN ISO 15106-3:2005-05 PLASTICS - FILM AND SHEETING - DETERMINATION OF WATER VAPOUR TRANSMISSION RATE - PART 3: ELECTROLYTIC DETECTION SENSOR METHOD
ISO 6719:2010 Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
DIN 50431:1988-05 TESTING OF SEMICONDUCTOR MATERIALS; MEASUREMENT OF THE RESISTIVITY OF SILICON OR GERMANIUM SINGLE CRYSTALS BY MEANS OF THE FOUR PROBE DIRECT CURRENT METHOD WITH CO-LINEAR ARRAY
DIN 50933:2015-08 MEASUREMENT OF COATING THICKNESSES - MEASUREMENT OF THE THICKNESS OF COATINGS BY DIFFERENCE MEASUREMENT USING A STYLUS INSTRUMENT
DIN 58196-5:1995-07 OPTICAL COATINGS - PART 5: TESTING OF THE ABRASION RESISTANCE WITH CLOTH
DIN 58196-1:1996-07 OPTICAL COATINGS - PART 1: TESTING OF THE ADHESION BY STORING IN DEIONIZED WATER AND IN SALT WATER
ISO 2409:2013 Paints and varnishes Cross-cut test
DIN 52347:1987-12 TESTING OF GLASS AND PLASTICS; ABRASION TEST; METHOD USING ABRASION WHEELS AND MEASUREMENT OF SCATTERED LIGHT
EN ISO 14155-1:2009 Clinical investigation of medical devices for human subjects - Part 1: General requirements (ISO 14155-1:2003)
ISO 10110-7:2017 Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfections
EN ISO 10993-1:2009/AC:2010 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS (ISO 10993-1:2009/COR 1:2010)
DIN ISO 10110-7:2016-05 (Draft) OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 7: SURFACE IMPERFECTION TOLERANCES
ISO 3231:1993 Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

View more information
£71.76
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.