VDI 4252 Blatt 2:2004-06
Current
The latest, up-to-date edition.
Hardcopy , PDF
German - English
01-06-2004
Preliminary note
1 Scope
2 Terms and definitions
3 Principle of method
4 Sampling device
5 Measurement procedure
6 Sampling efficiency and method limitations
7 Calibration and function control
8 Maintenance
9 Quality assurance
Annex A - Sampling protocol for active sampling
of moulds using gelatine/polycarbonate-filters
(example
Annex B - Comparative measurements of
sampling heads according to VDI 4252 Part 2
and VDI 2463 Part 8
Annex C - Sample exchange for method
Validation
Bibliography
Describes requirements for sampling of moulds in ambient air by means of filter methods.
DocumentType |
Standard
|
Pages |
26
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Current
|
Supersedes |
CEN/TS 16115-1:2011 | Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses |
VDI 3475 Blatt 2:2005-12 | Emission control - Facilities for biological waste - Composting an anaerobic (co-)digestion - Plant capacities up to approx. 6000 Mg/a |
DIN ISO 12219-5:2014-10 | INTERIOR AIR OF ROAD VEHICLES - PART 5: SCREENING METHOD FOR THE DETERMINATION OF THE EMISSIONS OF VOLATILE ORGANIC COMPOUNDS FROM VEHICLE INTERIOR PARTS AND MATERIALS - STATIC CHAMBER METHOD (ISO 12219-5:2014) |
DIN ISO 12219-4:2013-12 | INTERIOR AIR OF ROAD VEHICLES - PART 4: METHOD FOR THE DETERMINATION OF THE EMISSIONS OF VOLATILE ORGANIC COMPOUNDS FROM VEHICLE INTERIOR PARTS AND MATERIALS - SMALL CHAMBER METHOD (ISO 12219-4:2013) |
BS ISO 16000-16:2008 | Indoor air Detection and enumeration of moulds. Sampling by filtration |
VDI 4250 Blatt 2:2015-11 | Bioaerosols and biological agents - Environmental health assessment of bioaerosols in ambient air - Risk assessment for aerosols containing Legionella |
DIN ISO 12219-6:2015-04 (Draft) | INTERIOR AIR OF ROAD VEHICLES - PART 6: METHOD FOR THE DETERMINATION OF THE EMISSIONS OF SEMI-VOLATILE ORGANIC COMPOUNDS FROM VEHICLE INTERIOR PARTS AND MATERIALS AT HIGHER TEMPERATURE - SMALL CHAMBER METHOD (ISO 12219-6:2017) |
DIN ISO 16000-20:2015-11 | INDOOR AIR - PART 20: DETECTION AND ENUMERATION OF MOULDS - DETERMINATION OF TOTAL SPORE COUNT (ISO 16000-20:2014) |
VDI 4251-1 : 2007 COR 2 2016 | MEASUREMENT OF AIRBORNE MICROORGANISMS AND VIRUSES IN AMBIENT AIR - PLANNING OF PLANT-RELATED AMBIENT AIR MEASUREMENTS - PLUME MEASUREMENT |
VDI 4255 Blatt 4:2017-03 | Bioaerosols and biological agents - Emission factors for pig husbandry |
DIN EN ISO 16000-32:2014-10 | INDOOR AIR - PART 32: INVESTIGATION OF BUILDINGS FOR THE OCCURRENCE OF POLLUTANTS (ISO 16000-32:2014) |
DIN EN ISO 16000-26:2012-11 | Indoor air - Part 26: Sampling strategy for carbon dioxide (CO<(Index)2>) (ISO 16000-26:2012); German version EN ISO 16000-26:2012 |
VDI 2083 Blatt 18:2012-01 | Cleanroom technology - Biocontamination control |
DIN ISO 16000-18:2012-01 | Indoor air - Part 18: Detection and enumeration of moulds - Sampling by impaction (ISO 16000-18:2011 + Cor.1:2011) |
BS ISO 16000-17:2008 | Indoor air Detection and enumeration of moulds. Culture-based method |
VDI 4253 Blatt 2:2004-06 | Measurement of airborne microorganisms and viruses in ambient air - Culture based method for the determination of the concentration of mould in air - Indirect method after sampling with gelatine/polycarbonate filters |
DIN EN ISO 16000-19:2014-12 | Indoor air - Part 19: Sampling strategy for moulds (ISO 16000-19:2012) |
VDI 4255 Blatt 2:2009-12 | Bioaerosols and biological agents - Emission sources and control measures in livestock operations - Overview |
DIN ISO 16000-17:2010-06 | Indoor air - Part 17: Detection and enumeration of moulds - Culture-based method (ISO 16000-17:2008) |
DIN ISO 12219-3:2013-12 | Interior air of road vehicles - Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Micro-scale chamber method (ISO 12219-3:2012) |
UNE-CEN/TS 16115-1:2013 | Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses |
DIN ISO 16000-31:2014-09 | INDOOR AIR - PART 31: MEASUREMENT OF FLAME RETARDANTS AND PLASTICIZERS BASED ON ORGANOPHOSPHORUS COMPOUNDS - PHOSPHORIC ACID ESTER (ISO 16000-31:2014) |
DIN ISO 16000-29:2015-02 | INDOOR AIR - PART 29: TEST METHODS FOR VOC DETECTORS (ISO 16000-29:2014) |
VDI 2463 Blatt 7:2014-05 | Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS) |
VDI 4251 Blatt 3:2015-08 | Measurement of airborne microorganisms and viruses in ambient air - Plant-related dispersion modelling for bioaerosols |
DIN ISO 12219-2:2012-11 | Interior air of road vehicles - Part 2: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Bag method (ISO 12219-2:2012) |
DIN ISO 16000-33:2015-07 (Draft) | INDOOR AIR - PART 33: DETERMINATION OF PHTHALATES WITH GAS CHROMATOGRAPHY/MASS SPECTROMETRY (GC/MS) (ISO 16000-33:2017) |
DIN ISO 16000-33:2017-12 | INDOOR AIR - PART 33: DETERMINATION OF PHTHALATES WITH GAS CHROMATOGRAPHY/MASS SPECTROMETRY (GC/MS) (ISO 16000-33:2017) |
VDI 4253 Blatt 4:2013-02 | Bioaerosols and biological agents - Determination of total cell count by fluorescence analysis after staining with DAPI |
ISO 16000-17:2008 | Indoor air — Part 17: Detection and enumeration of moulds — Culture-based method |
VDI 4255-1 : 2005 COR 2016 | BIOAEROSOLS AND BIOLOGICAL AGENTS - SOURCES OF EMISSIONS AND CONTROL MEASURES - OVERVIEW |
VDI 4255 Blatt 3:2016-12 | Bioaerosols and biological agents - Emission factors for poultry |
DIN ISO 16000-27:2014-11 | INDOOR AIR - PART 27: DETERMINATION OF SETTLED FIBROUS DUST ON SURFACES BY SEM (SCANNING ELECTRON MICROSCOPY) (DIRECT METHOD) (ISO 16000-27:2014) |
DIN ISO 16000-24:2013-01 | INDOOR AIR - PART 24: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF VOLATILE ORGANIC COMPOUND (EXCEPT FORMALDEHYDE) CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS (ISO 16000-24:2009) |
DIN ISO 12219-1:2013-12 | Interior air of road vehicles - Part 1: Whole vehicle test chamber - Specification and method for the determination of volatile organic compounds in cabin interiors (ISO 12219-1:2012) |
DIN ISO 16000-6:2012-11 | Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA? sorbent, thermal desorption and gas chromatography using MS or MS-FID (ISO 16000-6:2011) |
DIN ISO 16000-25:2012-01 | Indoor air - Part 25: Determination of the emission of semi-volatile organic compounds by building products - Micro-chamber method (ISO 16000-25:2011) |
DIN ISO 16000-28:2012-12 | Indoor air - Part 28: Determination of odour emissions from building products using test chambers (ISO 16000-28:2012) |
VDI 4251 Blatt 2:2015-08 | Measurement of airborne microorganisms and viruses in ambient air - Determination of area-specific background concentrations |
DIN ISO 16000-4:2012-11 | INDOOR AIR - PART 4: DETERMINATION OF FORMALDEHYDE - DIFFUSIVE SAMPLING METHOD (ISO 16000-4:2011) |
DD CEN/TS 16115-1:2011 | Ambient air quality. Measurement of bioaerosols Determination of moulds using filter sampling systems and culture-based analyses |
VDI 3787 Blatt 10:2010-03 | Environmental meteorology - Human biometeorological requirements in the framework of recreation, prevention, therapy, and rehabilitation |
DIN ISO 16000-3:2013-01 | Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air - Active sampling method (ISO 16000-3:2011) |
ISO 16000-16:2008 | Indoor air — Part 16: Detection and enumeration of moulds — Sampling by filtration |
VDI 3898:2013-01 | Emission control - Plants for dry mechanical, physio-chemical, thermal and biological soil treatment |
VDI 4251 Blatt 4:2017-01 | Measurement of airborne microorganisms and viruses in ambient air - Determination of existing load |
PD CEN/TS 16115-2:2016 | Ambient air. Measurement of bioaerosols Planning and evaluation of plant-related plume measurements |
VDI 4250 Blatt 1:2014-08 | Bioaerosols and biological agents - Risk assessment of source-related ambient air measurements in the scope of environmental health - Effects of bioaerosol pollution on human health |
VDI 3475 Blatt 5:2015-10 | Emission control - Biological waste treatment facilities - Anaerobic digestion and post-treatment |
DIN ISO 12219-7:2016-02 (Draft) | INTERIOR AIR OF ROAD VEHICLES - PART 7: ODOUR DETERMINATION IN INTERIOR AIR OF ROAD VEHICLES AND TEST CHAMBER AIR OF TRIM COMPONENTS BY OLFACTORY MEASUREMENTS (ISO 12219-7:2017) |
DIN ISO 16000-30:2015-05 | INDOOR AIR - PART 30: SENSORY TESTING OF INDOOR AIR (ISO 16000-30:2014) |
DIN ISO 16000-16:2009-12 | Indoor air - Part 16: Detection and enumeration of moulds - Sampling by filtration (ISO 16000-16:2008) |
DIN ISO 16000-14:2012-03 | Indoor air - Part 14: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) - Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry (ISO 16000-14:2009) |
VDI 3477:2016-03 | Biological waste gas purification - Biofilters |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
DIN ISO 7708:1996-01 | AIR QUALITY - PARTICLE SIZE FRACTION DEFINITIONS FOR HEALTH-RELATED SAMPLING |
VDI 4253 Blatt 3:2008-08 | Measurement of airborne microorganisms and viruses in ambient air - Culture based method for the quantitative determination of bacteria in air - Method after separation in liquids |
EN 13098:2000 | Workplace atmosphere - Guidelines for measurement of airborne micro-organisms and endotoxin |
VDI 4253 Blatt 2:2004-06 | Measurement of airborne microorganisms and viruses in ambient air - Culture based method for the determination of the concentration of mould in air - Indirect method after sampling with gelatine/polycarbonate filters |
ISO/R 708:1968 | Withdrawal of ISO/R 708-1968 |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.