|
DIN 8513-2:1979-10
|
BRAZING AND BRAZE WELD FILLER METALS - SILVER-BEARING BRAZING ALLOYS WITH LESS THAN 20 % BY WT. SILVER - COMPOSITION, USE, TECHNICAL CONDITIONS OF DELIVERY
|
|
DIN IEC 60301:1985-12
|
PREFERRED DIAMETERS OF WIRE TERMINATIONS OF CAPACITORS AND RESISTORS
|
|
DIN 86033:1980-09
|
SOLDERED FLANGES FOR TUBES OF COPPER AND COPPER ALLOYS, NOMINAL PRESSURE 10
|
|
DIN 40686-4:1983-08
|
SURFACES OF DENSE CERAMIC COMPONENTS FOR ELECTRICAL ENGINEERING; TESTING OF SOFT SOLDERABLE METAL COATINGS
|
|
DIN 40500-5:1983-06
|
COPPER FOR ELECTRICAL PURPOSES; TINNED WIRE; TECHNICAL DELIVERY CONDITIONS
|
|
DIN IEC 60326-7 : 1985 AMD 1 1994
|
PRINTED BOARDS; PART 7: SPECIFICATION FOR SINGLE AND DOUBLE SIDED FLEXIBLE PRINTED BOARDS WITHOUT THROUGH CONNECTIONS
|
|
DIN EN 1254-4:1998-03
|
Copper and copper alloy plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends
|
|
DIN 8513-3:1986-07
|
FILLER METALS FOR BRAZING - SILVER-BASE BRAZING ALLOYS CONTAINING NOT LESS THAN 20 % SILVER BY MASS, COMPOSITION, USE, TECHNICAL DELIVERY CONDITIONS
|
|
DIN 65170:2009-01
|
AEROSPACE SERIES - BRAZED AND HIGH-TEMPERATURE BRAZED METALLIC COMPONENTS - TECHNICAL SPECIFICATIONS
|
|
DIN IEC 60068-2-20:1991-04
|
ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TEST T: SOLDERING
|
|
DIN 32506-2:1981-07
|
TESTING OF SOLDERABILITY - VERTICAL DIPPING TEST FOR SAMPLES OF COPPER ALLOYS, TESTS, EVALUATION
|
|
DIN EN 29454-1:1994-02
|
SOFT SOLDERING FLUXES; CLASSIFICATION AND REQUIREMENTS; PART 1: CLASSIFICATION, LABELLING AND PACKAGING
|
|
DIN 8513-5:1983-02
|
BRAZING ALLOYS - FILLER METALS AN NICKEL-BASE FOR HIGH TEMPERATURE BRAZING, USE, COMPOSITION, TECHNICAL TERMS OF DELIVERY
|
|
DIN IEC 60326-3:1993-09
|
PRINTED BOARDS - PART 3: DESIGN AND USE OF PRINTED BOARDS
|
|
DIN EN ISO 3677:2015-06 (Draft)
|
FILLER METAL FOR SOLDERING AND BRAZING - DESIGNATION (ISO 3677:2016)
|
|
DIN 32506-4:1981-07
|
TESTING OF SOLDERABILITY FOR SOFT SOLDERING - MEASUREMENT OF WETTING FORCE - TESTING, ASSESSMENT
|
|
DIN 32513:1990-01
|
SOLDERING PASTES - COMPOSITION, REQUIREMENTS AND TESTING
|
|
DIN IEC 60068-2-44:1980-12
|
BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS, GUIDANCE ON TEST T: SOLDERING
|
|
DIN 8513-1:1979-10
|
BRAZING AND BRAZE WELD FILLER METALS; COPPER BASE BRAZING ALLOYS; COMPOSITION, USE, TECHNICAL CONDITIONS OF DELIVERY
|
|
DIN 41496:1987-05
|
ELECTRICAL COMMUNICATIONS ENGINEERING; SOLDER BAGS, SOLDER LUGS, SOLDER PINS
|
|
DIN 2856-11:1988-01
|
CAPILLARY SOLDERING FITTINGS - DIMENSIONS OF SELECTED TYPES
|
|
DIN IEC 60326-4:1993-09
|
PRINTED BOARDS - PART 4: SPECIFICATION FOR SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLAIN HOLES
|
|
DIN 1719:1986-01
|
LEAD - COMPOSITION
|
|
DIN 40686-5:1983-08
|
SURFACES OF DENSE CERAMIC COMPONENTS FOR ELECTRICAL ENGINEERING; TESTING OF HARD SOLDERABLE METAL COATINGS
|
|
DIN IEC 60326-2 : 1992 AMD 1 1993
|
PRINTED BOARDS; PART 2: TEST METHODS
|
|
DIN 32506-3:1981-07
|
TESTING OF SOLDERABILITY FOR SOFT SOLDERING - VERTICAL DIPPING TEST FOR PRE-TINNED SPECIMENS - TESTING - ASSESSMENT
|
|
DIN 8514-1:1978-07
|
BRAZEABILITY, SOLDERABILITY - TERMS
|
|
DIN IEC 60326-8 : 1985 AMD 1 1994
|
PRINTED BOARDS; SPECIFICATION FOR SINGLE AND DOUBLE SIDED FLEXIBLE PRINTED BOARDS WITH THROUGH CONNECTIONS
|
|
DIN 8513-4:1981-02
|
BRAZING AND BRAZE WELDING FILLER METALS - ALUMINIUM BASE, COMPOSITION, USE, TECHNICAL TERMS OF DELIVERY
|
|
DIN 8505-1:1979-05
|
BRAZING AND SOLDERING - GENERAL TERMS AND DEFINITIONS
|
|
ISO 4063:2009
|
Welding and allied processes — Nomenclature of processes and reference numbers
|
|
DIN 65228:1996-11 (Draft)
|
AEROSPACE - QUALIFICATION TEST OF BRAZERS - BRAZING OF METALLIC COMPONENTS
|
|
DIN 65169:2016-08 (Draft)
|
AEROSPACE - BRAZED AND HIGH-TEMPERATURE BRAZED COMPONENTS - DIRECTIONS FOR DESIGN
|
|
DIN 8527-1:1997-08
|
FLUXES FOR SOLDERING OF HEAVY METALS - PART 1: REQUIREMENTS AND TESTS
|
|
DIN IEC 60326-6:1994-07
|
PRINTED BOARDS - PART 6: SPECIFICATION FOR MULTILAYER PRINTED BOARDS
|
|
DIN IEC 60068-2-54:1988-01
|
ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS T; SOLDERING; TEST TA; SOLDERABILITY TESTING BY THE WETTING BALANCE METHOD
|
|
DIN EN 29453:1994-02
|
SOFT SOLDER ALLOYS - CHEMICAL COMPOSITIONS AND FORMS
|
|
DIN 8505-3:1983-01
|
BRAZING AND SOLDERING; CLASSIFICATION OF PROCESSES ACCORDING TO ENERGY TRANSFER MEDIA; DESCRIPTION OF PROCESSES
|
|
DIN EN 1254-1:1998-03
|
Copper and copper alloy plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
|
|
DIN 8505-2:1979-05
|
BRAZING AND SOLDERING - CLASSIFICATION OF PROCESSES, TERMS
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.