ISO 5167-3:2003
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 3: Nozzles and Venturi nozzles
|
ISO 5725-1:1994
|
Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
|
SAE J 177 : 1995
|
MEASUREMENT OF CARBON DIOXIDE, CARBON MONOXIDE, AND OXIDES OF NITROGEN IN DIESEL EXHAUST
|
SAE J 1003 : 1995
|
DIESEL ENGINE EMISSION MEASUREMENT PROCEDURE
|
SAE J 244 : 2011
|
MEASUREMENT OF INTAKE AIR OR EXHAUST GAS FLOW OF DIESEL ENGINES
|
SAE J 1088 : 1993
|
TEST PROCEDURE FOR THE MEASUREMENT OF GASEOUS EXHAUST EMISSIONS FROM SMALL UTILITY ENGINES
|
ISO 8178-5:2015
|
Reciprocating internal combustion engines Exhaust emission measurement Part 5: Test fuels
|
ISO 7066-2:1988
|
Assessment of uncertainty in the calibration and use of flow measurement devices — Part 2: Non-linear calibration relationships
|
ISO 5168:2005
|
Measurement of fluid flow — Procedures for the evaluation of uncertainties
|
ISO 8178-1:2017
|
Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions
|
ISO 8178-2:2008
|
Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
|
ISO 8178-3:1994
|
Reciprocating internal combustion engines Exhaust emission measurement Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
|
ISO 5167-4:2003
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 4: Venturi tubes
|
SAE J 1937 : 2011
|
ENGINE TESTING WITH LOW-TEMPERATURE CHARGE AIR-COOLER SYSTEMS IN A DYNAMOMETER TEST CELL
|
ISO 9000-2:1997
|
Quality management and quality assurance standards — Part 2: Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003
|
ISO 5167-2:2003
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 2: Orifice plates
|
ISO 8178-9:2012
|
Reciprocating internal combustion engines Exhaust emission measurement Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
|
ISO/TR 3313:1998
|
Measurement of fluid flow in closed conduits Guidelines on the effects of flow pulsations on flow-measurement instruments
|
ISO 14396:2002
|
Reciprocating internal combustion engines Determination and method for the measurement of engine power Additional requirements for exhaust emission tests in accordance with ISO 8178
|
SAE J 1151 : 2011
|
METHANE MEASUREMENT USING GAS CHROMATOGRAPHY
|
ISO 9000-4:1993
|
Quality management and quality assurance standards — Part 4: Guide to dependability programme management
|
ISO 3173:1974
|
Road vehicles — Apparatus for measurement of the opacity of exhaust gas from diesel engines operating under steady state conditions
|
ISO 5167-1:2003
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements
|
ISO 5725-2:1994
|
Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
|
ISO 3046-1:2002
|
Reciprocating internal combustion engines Performance Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods Additional requirements for engines for general use
|
ISO 8178-7:2015
|
Reciprocating internal combustion engines Exhaust emission measurement Part 7: Engine family determination
|
ISO 9000:2015
|
Quality management systems — Fundamentals and vocabulary
|
ISO 8178-4:2017
|
Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state and transient test cycles for different engine applications
|
ISO/TR 7066-1:1997
|
Assessment of uncertainty in calibration and use of flow measurement devices — Part 1: Linear calibration relationships
|
ISO 10054:1998
|
Internal combustion compression-ignition engines Measurement apparatus for smoke from engines operating under steady-state conditions Filter-type smokemeter
|
ISO 2534:1998
|
Road vehicles Engine test code Gross power
|
ISO 9249:2007
|
Earth-moving machinery — Engine test code — Net power
|
ISO 8665:2006
|
Small craft Marine propulsion reciprocating internal combustion engines Power measurements and declarations
|
ISO 1585:1992
|
Road vehicles Engine test code Net power
|
SAE J 1936 : 1995
|
CHEMICAL METHODS FOR THE MEASUREMENT OF NONREGULATED DIESEL EMISSIONS
|
ISO 11614:1999
|
Reciprocating internal combustion compression-ignition engines Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
|
ISO 3046-3:2006
|
Reciprocating internal combustion engines Performance Part 3: Test measurements
|
ISO 8178-6:2000
|
Reciprocating internal combustion engines Exhaust emission measurement Part 6: Report of measuring results and test
|
ISO 9000-1:1994
|
Quality management and quality assurance standards — Part 1: Guidelines for selection and use
|
ISO 8178-10:2002
|
Reciprocating internal combustion engines Exhaust emission measurement Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
|
ISO 8178-8:2015
|
Reciprocating internal combustion engines Exhaust emission measurement Part 8: Engine group determination
|
ISO 9000-3:1997
|
Quality management and quality assurance standards Part 3: Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software
|
ISO 2288:1997
|
Agricultural tractors and machines Engine test code Net power
|