|
EN 10002-1 : 2001
|
METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
|
|
EN 629-2 : 1996
|
TRANSPORTABLE GAS CYLINDERS - 25E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS - GAUGE INSPECTION
|
|
EN 288-1:1992/A1:1997
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING
|
|
EN 288-3:1992/A1:1997
|
SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 3: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF STEELS
|
|
ISO 2604-5:1978
|
Steel products for pressure purposes Quality requirements Part 5: Longitudinally welded austenitic stainless steel tubes
|
|
EN 1089-1 : 1996
|
TRANSPORTABLE GAS CYLINDERS - GAS CYLINDER IDENTIFICATION (EXCLUDING LPG) - STAMPMARKING
|
|
EN 10088-3:2014
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
|
|
EN ISO 11114-3:2010
|
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010)
|
|
ISO 4978:1983
|
Flat rolled steel products for welded gas cylinders
|
|
EN ISO 10692-2:2001
|
Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001)
|
|
EN ISO 11114-1:2012/A1:2017
|
GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1: 2012/AMD 1:2017)
|
|
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
|
|
EN 10028-7:2016
|
Flat products made of steels for pressure purposes - Part 7: Stainless steels
|
|
EN 10045-1 : 1990
|
METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
|
|
ISO 3651-2:1998
|
Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
|
|
EN 962:1996/A2:2000
|
TRANSPORTABLE GAS CYLINDERS - VALVE PROTECTION CAPS AND VALVE GUARDS FOR INDUSTRIAL AND MEDICAL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTS
|
|
EURONORM 6 : 1955
|
FOLDING TEST FOR STEEL
|
|
EURONORM 12 : 1955
|
FOLDING TEST OF SHEET STEELS AND STRIPS WITH A THICKNESS OF LESS THAN 3 MM
|
|
EN ISO 3651-2 : 1998
|
DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID
|
|
EN 10003-1 : 1994
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - TEST METHOD
|
|
EN 25817 : 1992
|
ARC WELDED JOINTS IN STEEL - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS
|
|
EN 1435:1997/A2:2003
|
NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS
|
|
EN 10088-1:2014
|
Stainless steels - Part 1: List of stainless steels
|
|
EN 287-1:2011
|
Qualification test of welders - Fusion welding - Part 1: Steels
|
