03/119040 DC : DRAFT NOV 2003

Name: 03/119040 DC : DRAFT NOV 2003
Brand: BSI

Superseded

View Superseded by

PREN 1010-1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS

Superseded date

12-21-2004

Published date

11-23-2012

Publisher

British Standards Institution

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
  5.1 General
  5.2 Requirements common to printing and paper converting
      machines
      5.2.1 Safeguarding of danger points
      5.2.2 Guards and interlocks
      5.2.3 Devices for setting-up, cleaning, trouble-shooting
             during the work process and maintenance
      5.2.4 Explosion prevention and protection
      5.2.5 Electrical equipment
      5.2.6 Control systems
      5.2.7 Indicators, marking, actuators, prestart warning devices
      5.2.8 Two-hand controls
      5.2.9 Electrosensitive protective devices (ESPDs)
      5.2.10 Pressure sensitive mats, trip devices
      5.2.11 Safety position switches
      5.2.12 Work platforms, access stairs, passageways and raised
             workplaces
      5.2.13 Stability
      5.2.14 High contact temperatures
      5.2.15 Noise
      5.2.16 Radiation hazards
      5.2.17 Immunity to electromagnetic disturbances
  5.3 Common devices
      5.3.1 Stationary knives
      5.3.2 Rotary tools
      5.3.3 Dangerous tools
      5.3.4 Feeding units, delivery units (pile lifting and lowering
             devices)
      5.3.5 Reel unwinding and rewinding devices for webs
6 Verification of the safety requirements and/or protective measures
7 Information for use
  7.1 Minimum requirements for machine markings
  7.2 Instruction handbook
Annex A (informative) Classification of zones for printing presses
        and finishing machines (relating to 5.2.4)
      A.1 General
      A.2 Rotary web gravure printing machines
      A.3 Sheet-fed rotary gravure printing machines
      A.4 Rotary web flexographic printing machines, wallpaper
           printing machines
      A.5 Screen printing machines for printing on sheets, web
           or three-dimensional objects
      A.6 Rotary and flatbed film printing machines
      A.7 Machines for printing imitation leather and film
      A.8 Wash-out machines and washing machines in which
           flammable liquids with flash points below 55 degrees
           C used
      A.9 Roller coating units with closed side frames reaching
           down to floor level
      A.10 Roller coaters with side frames with cut-outs or with
           side frames that do not reach to floor level
Annex B (normative) Audible prestart warning devices
      B.1 Application
      B.2 Control arrangement
      B.3 Timing chart
Annex C (informative) Risk analysis relating to the pitch angle of
        access stairs
Annex D (informative) Example of layout of an instruction handbook
      D.1 Information relating to the machine
      D.2 Information relating to safety
      D.3 Information relating to transport, handling and storage of
           the machine
      D.4 Installation, commissioning, removal
      D.5 Information relating to the use of the machine
      D.6 Information relating to maintenance of the machine
Annex ZA (informative) Relationship between this European Standard
         and the Essential Requirements of EU Directive 98/37/EC
Annex ZB (informative) Clauses of this European Standard addressing
         essential requirements or other provisions of EU Directive
         94/9/EC
Bibliography

prEN 1010-1

Committee	MCE/3/9
DocumentType	Draft
PublisherName	British Standards Institution
Status	Superseded
SupersededBy	BS EN 1010-1 : 2004

Standards	Relationship
PREN 1010-1 : DRAFT 2003	Identical

EN 294:1992/AC:1993	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
EN 50281-1-2 : 98 AMD 1 2002	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1-2: ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - SELECTION, INSTALLATION AND MAINTENANCE
ISO 10075-2:1996	Ergonomic principles related to mental workload Part 2: Design principles
EN 1127-1:2011	Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 1539:2015	Dryers and ovens, in which flammable substances are released - Safety requirements
EN 894-3:2000+A1:2008	Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
EN 418 : 1992	SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
EN 982:1996+A1:2008	Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
ISO 4871:1996	Acoustics — Declaration and verification of noise emission values of machinery and equipment
EN 1037:1995+A1:2008	Safety of machinery - Prevention of unexpected start-up
EN 12626 : 1997	SAFETY OF MACHINERY - LASER PROCESSING MACHINES - SAFETY REQUIREMENTS
ISO 14122-3:2016	Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
EN 547-2:1996+A1:2008	Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
ISO 14122-1:2016	Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
EN 60825-1:2014/AC:2017-06	SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
EN 50039:1980	Electrical apparatus for potentially explosive atmospheres - Intrinsically safe electrical systems 'i'
EN 1088:1995+A2:2008	Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
ISO/TR 11688-1:1995	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
EN 894-2:1997+A1:2008	Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
R044-001 : 1999	SAFETY OF MACHINERY - GUIDANCE AND RECOMMENDATIONS FOR THE AVOIDANCE OF HAZARDS DUE TO STATIC ELECTRICITY
EN 61310-2:2008	Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN 50020:2002	Electrical apparatus for potentially explosive atmospheres - Intrinsic safety 'i'
EN 614-2:2000+A1:2008	Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks
EN 999:1998+A1:2008	Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body
EN 13463-1:2009	Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
EN 811 : 1996	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS
EN 349:1993+A1:2008	Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
EN 1034-3:2011	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders
EN 547-1:1996+A1:2008	Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
EN 1005-1:2001+A1:2008	Safety of machinery - Human physical performance - Part 1: Terms and definitions
EN 1005-2:2003+A1:2008	Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
IEC 61508-5:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508)
EN 1760-1:1997+A1:2009	Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
IEC 61508-4:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508)
IEC 61508-3:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508)
EN 1050 : 1996	SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN 50017:1998	Electrical apparatus for potentially explosive atmospheres - Powder filling "q"
EN 614-1:2006+A1:2009	Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN 1012-1:2010	Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
EN 50019:2000/corrigendum Apr. 2003	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E"
EN 50018 : 2000 AMD 1 2002	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D"
EN 292-1 : 1991	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
EN 1034-1:2000+A1:2010	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
EN 574:1996+A1:2008	Safety of machinery - Two-hand control devices - Functional aspects - Principles for design
EN 563:1994/A1:1999/AC:2000	SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES
EN 626-2:1996+A1:2008	Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
EN ISO 14122-3:2016	Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)
EN 61496-1:2013/AC:2015	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012)
EN 50281-3:2002	Equipment for use in the presence of combustible dust - Part 3: Classification of areas where combustible dusts are or may be present
EN 61000-6-2:2005/corrigendum:2005	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
EN 953:1997+A1:2009	Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 842:1996+A1:2008	Safety of machinery - Visual danger signals - General requirements, design and testing
EN 547-3:1996+A1:2008	Safety of machinery - Human body measurements - Part 3: Anthropometric data
EN 13023:2003+A1:2010	Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3
EN ISO 14122-2:2016	Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)
EN 60079-14:2014/AC:2016	EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
ISO 10075-1:2017	Ergonomic principles related to mental workload — Part 1: General issues and concepts, terms and definitions
EN 983:1996+A1:2008	Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN 954-1 : 1996	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
EN 12198-1:2000+A1:2008	Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles
IEC 61508-6:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508)
EN 292-2 : 91 AMD 1 95	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION
EN ISO 4871:2009	Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN 626-1:1994+A1:2008	Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
EN 1760-2:2001+A1:2009	Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
EN 50015:1998	Electrical apparatus for potentially explosive atmospheres - Oil immersion "o"
EN 61010-1:2010	Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
EN 1005-3:2002+A1:2008	Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
EN 13463-5:2011	Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
IEC 61508-1:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO 11553:1996	Safety of machinery — Laser processing machines — Safety requirements
EN 50016:2002	Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus "p"
EN 457 : 1992	SAFETY OF MACHINERY - AUDITORY DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
ISO 14122-2:2016	Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
IEC 61508-7:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508)
EN ISO 11688-1:2009	Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
EN 50028:1987	Electrical apparatus for potentially explosive atmospheres - Encapsulation 'm'
EN ISO 14122-1:2016	Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)
EN 61310-1:2008	Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 50014:1997/A2:1999	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
IEC 61508-2:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508)
EN 1070 : 1998	SAFETY OF MACHINERY - TERMINOLOGY
EN 286-1:1998/A2:2005	SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES
EN 60204-1 : 2006 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 894-1:1997+A1:2008	Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators