|
UL 1685:4ED 2015-07
|
Vertical-Tray Fire-Propagation and Smoke-Release Test for Electrical and Optical-Fiber Cables
|
|
EN 50266-2-4 : 2001 COR 2002
|
COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY- MOUNTED BUNCHED WIRES OR CABLES - PART 2-4: PROCEDURES - CATEGORY C
|
|
NFPA 262 : 2015
|
METHOD OF TEST FOR FLAME TRAVEL AND SMOKE OF WIRES AND CABLES FOR USE IN AIR-HANDLING SPACES
|
|
ISO 9705:1993
|
Fire tests Full-scale room test for surface products
|
|
IEC 60695-5-1:2002
|
Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance
|
|
IEC 60695-1-1:1999
|
Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
|
|
EN 50289-4-11:2002
|
Communication cables - Specifications for test methods - Part 4-11: Environmental test methods - A horizontal integrated fire test method
|
|
89/106/EEC : 1988
|
COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
|
|
IEC 60695-6-1:2005+AMD1:2010 CSV
|
Fire hazard testing - Part 6-1: Smoke obscuration - General guidance
|
|
ISO 13943:2017
|
Fire safety — Vocabulary
|
|
IEC 60754-1:2011
|
Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
|
|
IEC 60332-1-1:2004+AMD1:2015 CSV
|
Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulatedwire or cable - Apparatus
|
|
IEC 60332-3-24:2000+AMD1:2008 CSV
|
Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C
|
|
EN 13823:2010+A1:2014
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
|
|
IEC 60332-1-2:2004+AMD1:2015 CSV
|
Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame
|
|
NES 713 : ISSUE 3
|
DETERMINATION OF THE TOXICITY INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS
|
|
IEC 60754-2:2011
|
Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
|
|
UL 1666:5ED 2007-02
|
Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts
|
|
ASTM E 662 : 2017-02
|
TEST METHOD FOR SPECIFIC OPTICAL DENSITY OF SMOKE GENERATED BY SOLID MATERIALS
|
|
IEC 60695-8-1:2016
|
Fire hazard testing - Part 8-1: Heat release - General guidance
|
|
IEC 60695-7-1:2010
|
Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance
|
|
EN 50267-2-3:1998
|
Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-3: Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity
|
|
IEC 61034-2:2005+AMD1:2013 CSV
|
Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements
|
|
IEC 60332-3-10:2000+AMD1:2008 CSV
|
Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
|
|
IEC 61034-1:2005+AMD1:2013 CSV
|
Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
|
|
EN 50265-2-1:1998
|
Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2-1: Procedures - 1 kW pre-mixed flame
|
