|
IEC 62236-3-1:2008
|
Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle
|
|
IEC 60349-1:2010
|
Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors
|
|
IEC 60077-3:2001
|
Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for d.c. circuit-breakers
|
|
IEC 61287-1:2014
|
Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods
|
|
EN 14363:2016
|
Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests
|
|
IEC 60322:2001
|
Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction
|
|
EN 14067-4:2013
|
Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track
|
|
EN 14813-2:2006+A1:2010
|
Railway applications - Air conditioning for driving cabs - Part 2: Type tests
|
|
EN 14067-5:2006+A1:2010
|
Railway applications - Aerodynamics - Part 5: Requirements and test procedures for aerodynamics in tunnels
|
|
IEC 60494-1:2013
|
Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 1: Pantographs for main line vehicles
|
|
EN 13452-2 : 2003
|
RAILWAY APPLICATIONS - BRAKING - MASS TRANSIT BRAKE SYSTEMS - METHODS OF TEST
|
|
EN 13129-2 : 2004
|
RAILWAY APPLICATIONS - AIR CONDITIONING FOR MAIN LINE ROLLING STOCK - PART 2: TYPE TESTS
|
|
IEC 60850:2014
|
Railway applications - Supply voltages of traction systems
|
|
EN 50238 : 2003 COR 2014
|
RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS
|
|
EN 13272:2012
|
Railway applications - Electrical lighting for rolling stock in public transport systems
|
|
IEC 61377-2:2002
|
Railway applications - Rolling stock - Combined testing - Part 2: Chopper-fed direct current traction motors and their control
|
|
EN 50317:2012/AC:2012
|
RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - REQUIREMENTS FOR AND VALIDATION OF MEASUREMENTS OF THE DYNAMIC INTERACTION BETWEEN PANTOGRAPH AND OVERHEAD CONTACT LINE
|
|
IEC 60349-2:2010
|
Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors
|
|
IEC 61377-3:2002
|
Railway applications - Rolling stock - Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control system
|
|
2004/50/EC : 2004
|
DIRECTIVE 2004/50/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 APRIL 2004 AMENDING COUNCIL DIRECTIVE 1996/48/EC ON THE INTEROPERABILITY OF THE TRANS-EUROPEAN HIGH-SPEED RAIL SYSTEM AND DIRECTIVE 2001/16/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL ON THE INTEROPERABILITY OF THE TRANS-EUROPEAN CONVENTIONAL RAIL SYSTEM
|
|
EN 14750-2 : 2006
|
RAILWAY APPLICATIONS - AIR CONDITIONING FOR URBAN AND SUBURBAN ROLLING STOCK - PART 2: TYPE TESTS
|
|
IEC 60494-2:2013
|
Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles
|
|
IEC 60077-2:2017
|
Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules
|
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code)
|
|
IEC 62278:2002
|
Railway applications - Specification and demonstration of reliability, availability, maintainability and safety (RAMS)
|
|
IEC 61991:2000
|
Railway applications - Rolling stock - Protective provisions against electrical hazards
|
|
IEC 60571:2012
|
Railway applications - Electronic equipment used on rolling stock
|
|
ENV 12299 : DRAFT 99
|
RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION
|
|
EN 14033-2:2017
|
Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working
|
|
EN 14033-1:2017
|
Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running
|
|
IEC 62236-3-2:2008
|
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
|
|
ISO 9001:2015
|
Quality management systems — Requirements
|
|
ISO 3095:2013
|
Acoustics Railway applications Measurement of noise emitted by railbound vehicles
|
|
2001/16/EC : 2001
|
DIRECTIVE 2001/16/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 19 MARCH 2001 ON THE INTEROPERABILITY OF THE TRANS-EUROPEAN CONVENTIONAL RAIL SYSTEM
|
|
IEC 60077-1:2017
|
Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
|
|
EN 12663 : 2000
|
RAILWAY APPLICATIONS - STRUCTURAL REQUIREMENTS OF RAILWAY VEHICLE BODIES
|
|
ISO 3381:2005
|
Railway applications Acoustics Measurement of noise inside railbound vehicles
|
|
IEC 61377-1:2006
|
Railway applications - Rolling stock - Part 1: Combined testing of inverter-fed alternating current motors and their control system
|
|
EN 13775-1:2003
|
Railway applications - Measuring of new and modified freight wagons - Part 1: Measuring principles
|
|
96/48/EC : 1996
|
COUNCIL DIRECTIVE 96/48/EC OF 23 JULY 1996 ON THE INTEROPERABILITY OF THE TRANS-EUROPEAN HIGH-SPEED RAIL SYSTEM
|
|
IEC 60077-5:2003
|
Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses
|
|
IEC 60077-4:2003
|
Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers
|
|
IEC 60310:2016
|
Railway applications - Traction transformers and inductors on board rolling stock
|
