ASTM E 446 : 2015 : REDLINE
|
Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
|
ASNT SNT TC 1A : 2016
|
TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
|
ASTM E 186 : 2015 : REDLINE
|
Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings
|
ISO/TS 29001:2010
|
Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations
|
ASTM E 309 : 2016 : REDLINE
|
Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation
|
ISO/TR 10949:2002
|
Hydraulic fluid power Component cleanliness Guidelines for achieving and controlling cleanliness of components from manufacture to installation
|
ISO 9712:2012
|
Non-destructive testing Qualification and certification of NDT personnel
|
ISO 13628-3:2000
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 3: Through flowline (TFL) systems
|
ASTM D 1414 : 2015 : REDLINE
|
Standard Test Methods for Rubber O-Rings
|
ISO 13679:2002
|
Petroleum and natural gas industries Procedures for testing casing and tubing connections
|
ASTM E 273 : 2015 : REDLINE
|
Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
|
API 14A : 2015
|
SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
|
ISO 9606-1:2012
|
Qualification testing of welders — Fusion welding — Part 1: Steels
|
ISO/TS 16431:2002
|
Hydraulic fluid power Assembled systems Verification of cleanliness
|
MIL-STD-792 Revision F:2006
|
IDENTIFICATION MARKING REQUIREMENTS FOR SPECIAL PURPOSE COMPONENTS
|
ASTM E 10 : 2017-05
|
TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS
|
ISO/IEC Guide 25:1990
|
General requirements for the competence of calibration and testing laboratories
|
ISO 10417:2004
|
Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress
|
ISO 15612:2004
|
Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure
|
API MPM CH10.4 : 2013
|
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.4: DETERMINATION OF WATER AND/OR SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (FIELD PROCEDURE)
|
ISO 31-0:1992
|
Quantities and units Part 0: General principles
|
ISO 15614-1:2017
|
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
|
ISO 15156-2:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
|
ANSI/NCSL Z540 1 : 94(R2002)
|
CALIBRATION - CALIBRATION LABORATORIES AND MEASURING AND TEST EQUIPMENT - GENERAL REQUIREMENTS
|
ISO 15156-3:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
|
ISO 15611:2003
|
Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience
|
ASTM E 426 : 2016 : REDLINE
|
Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys
|
ISO 15156-1:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials
|
ISO 13665:1997
|
Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections
|
API 5C3 : 1994
|
BULLETIN ON FORMULAS AND CALCULATIONS FOR CASING, TUBING, DRILL PIPE AND LINE PIPE PROPERTIES
|
ASTM E 280 : 2015 : REDLINE
|
Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings
|
ISO 9000:2015
|
Quality management systems — Fundamentals and vocabulary
|
BS 2M 54:1991
|
Specification for temperature control in the heat treatment of metals
|
ISO 3601-1:2012
|
Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes
|
ASTM E 709 : 2015 : REDLINE
|
Standard Guide for Magnetic Particle Testing
|
ISO 15613:2004
|
Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test
|
SAE AMS H 6875 : 2010
|
HEAT TREATMENT OF STEEL RAW MATERIALS
|
ISO 3601-3:2005
|
Fluid power systems O-rings Part 3: Quality acceptance criteria
|
ISO 15607:2003
|
Specification and qualification of welding procedures for metallic materials General rules
|
API 5C5 : 2017
|
PROCEDURES FOR TESTING CASING AND TUBING CONNECTIONS
|
ASTM D 638 : 2014 : REDLINE
|
Standard Test Method for Tensile Properties of Plastics
|
ISO 18265:2013
|
Metallic materials — Conversion of hardness values
|
ISO 11960:2014
|
Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
|
ISO 10414-1:2008
|
Petroleum and natural gas industries — Field testing of drilling fluids — Part 1: Water-based fluids
|
ISO/IEC Guide 22:1996
|
General criteria for supplier's declaration of conformity
|
ASTM E 92 : 2017 : REDLINE
|
Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
|