1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms
4 Ordering information
5 Materials selection report
6 General guidelines for corrosion evaluations and materials
    selection
    6.1 General
    6.2 Internal corrosion in oil and gas production and
         processing
         6.2.1 Corrosion evaluation
         6.2.2 Corrosion mechanisms
         6.2.3 Corrosion parameters
    6.3 Internal corrosion in injection systems
    6.4 Internal corrosion in utility systems
    6.5 Sand erosion
    6.6 External corrosion evaluation
         6.6.1 General
         6.6.2 External marine atmospheric environments
         6.6.3 External non-marine atmospheric environments
         6.6.4 External corrosion for buried and submerged
               installations
         6.6.5 Corrosion under insulation (CUI)
    6.7 Polymeric materials
    6.8 Glass-fibre-reinforced plastic
    6.9 Mechanical properties and material usage limitations
         6.9.1 General
         6.9.2 Submerged installations
7 Materials selection for specific applications and/or systems
    7.1 General
    7.2 Oil and gas production and processing systems
         7.2.1 General
         7.2.2 Heat exchangers
         7.2.3 Wellhead, production and process systems
         7.2.4 Flare systems
         7.2.5 Produced water
    7.3 Injection systems
         7.3.1 General
         7.3.2 De-aerated seawater
         7.3.3 Aerated seawater
         7.3.4 Produced-water and aquifer-water
         7.3.5 Gas injection systems
    7.4 Utility systems
         7.4.1 General
         7.4.2 Fresh-water systems
         7.4.3 Seawater-carrying systems
         7.4.4 Other utility systems
    7.5 Pipelines and flowlines
8 Corrosion control
    8.1 Chemical treatment
    8.2 Internal corrosion allowance
    8.3 Selection of internal and external coatings
    8.4 External splash zone protection
    8.5 Cathodic protection
         8.5.1 Offshore
         8.5.2 Onshore
    8.6 Corrosion protection of closed compartments
    8.7 Connection of dissimilar materials
         8.7.1 Piping systems
         8.7.2 Submerged installations
         8.7.3 Structural installations
    8.8 Sealing materials
    8.9 Fasteners
    8.10 Weld overlay
    8.11 Weld consumables
    8.12 Corrosion management
Annex A (informative) - Design basis for hydrocarbon systems
Annex B (informative) - Corrosion monitoring
    B.1 General
    B.2 Location of probes
Annex C (informative) - Chemical composition of some typical
        oilfield alloys
Bibliography