10/30227442 DC : 0
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Unit Responsibility
5 Basic requirements
6 Basic design
7 Accessories
8 Inspection, testing and preparation for shipment
9 Vendor's data
Annex A (informative) - Pump material specifications
Annex B (normative) - Vendor drawing and data
requirements (VDDR) form
Annex C (normative) - Pulsation and vibration control
techniques
Annex D (informative) - Reciprocating
positive-displacement pump data sheets
Annex E (informative) - NPIP and NPSH
Annex F (informative) - Inspector's checklist
Annex G (normative) - Lubrication system
Bibliography
BS EN ISO 13710
Committee |
MCE/6
|
DocumentType |
Draft
|
Pages |
93
|
PublisherName |
British Standards Institution
|
Status |
Current
|
ISO 13707:2000 | Petroleum and natural gas industries Reciprocating compressors |
ISO 9328-4:2011 | Steel flat products for pressure purposes Technical delivery conditions Part 4: Nickel-alloy steels with specified low temperature properties |
AGMA 2015-1 : A | ACCURACY CLASSIFICATION SYSTEM - TANGENTIAL MEASUREMENTS FOR CYLINDRICAL GEARS |
EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
ISO 15649:2001 | Petroleum and natural gas industries — Piping |
ISO 11972:2015 | Corrosion-resistant cast steels for general applications |
AGMA 9002 : B | BORES AND KEYWAYS FOR FLEXIBLE COUPLINGS (INCH SERIES) |
ABMA 9 : 2015 | LOAD RATINGS AND FATIGUE LIFE FOR BALL BEARINGS |
ISO 7005-2:1988 | Metallic flanges — Part 2: Cast iron flanges |
ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
EN 10028-3:2017 | Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
API 546 : 2008 | BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
IEEE 841-2009 | IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors--Up to and Including 370 kW (500 hp) |
ISO 9725:2017 | Nickel and nickel alloy forgings |
ISO 1083:2004 | Spheroidal graphite cast irons - Classification |
EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
ISO 1328-1:2013 | Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
ISO 724:1993 | ISO general-purpose metric screw threads — Basic dimensions |
API 614 : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
EN 10213-2 : 1995 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 2: STEEL GRADES FOR USE AT ROOM TEMPERATURE AND ELEVATED TEMPERATURES |
ASTM A 516/A516M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
ISO 4991:2015 | Steel castings for pressure purposes |
ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
EN 13835:2012 | Founding - Austenitic cast irons |
EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
ISO 9329-4:1997 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels |
ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
ISO 2892:2007 | Austenitic cast irons Classification |
EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
API 578 : 2010 | GUIDELINES FOR A MATERIAL VERIFICATION PROGRAM (MVP) FOR NEW AND EXISTING ASSETS |
EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
EN 10095:1999 | Heat resisting steels and nickel alloys |
EN 10283:2010 | Corrosion resistant steel castings |
HI 6.6 : 2015 | RECIPROCATING PUMP TESTS |
ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
EN 10272:2016 | Stainless steel bars for pressure purposes |
ASTM A 563 : 2015 : REDLINE | Standard Specification for Carbon and Alloy Steel Nuts |
ISO 9329-2:1997 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and alloyed steels with specified elevated temperature properties |
ISO 683-18:2014 | Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products |
ANSI S2.19 : 0 | MECHANICAL VIBRATION - BALANCE QUALITY REQUIREMENTS OF RIGID ROTORS - PART 1: DETERMINATION OF PERMISSIBLE RESIDUAL UNBALANCE, INCLUDING MARINE APPLICATIONS |
EN 10222-5:2017 | Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
EN 10250-4:1999 | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
ASTM A 217/A217M : 2014 : REDLINE | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
EN 10222-2:2017 | Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
EN 10213-3 : 1995 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 3: STEEL GRADES FOR USE AT LOW TEMPERATURES |
SSPC-SP 6 : 2015 | COMMERCIAL BLAST CLEANING |
MSS SP 44 : 2016 | STEEL PIPELINE FLANGES |
EN 1563:2011 | Founding - Spheroidal graphite cast irons |
API 526 : 2017 | FLANGED STEEL PRESSURE-RELIEF VALVES |
ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
ISO 261:1998 | ISO general purpose metric screw threads General plan |
API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
ISO 5753:1991 | Rolling bearings — Radial internal clearance |
ISO 9327-4:1999 | Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 4: Weldable fine grain steels with high proof strength |
API 686 : 2009 | RECOMMENDED PRACTICE FOR MACHINERY INSTALLATION AND INSTALLATION DESIGN |
NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
MSS SP 55 : 2011 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
ISO 185:2005 | Grey cast irons Classification |
ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
API 675 : 2012 | POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
AWS D1.1 : 2000 | STRUCTURAL WELDING CODE - STEEL |
ASTM A 515/A515M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
ISO 9327-5:1999 | Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 5: Stainless steels |
EN 10213-4 : 1995 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 4: AUSTENITIC AND AUSTENITIC-FERRITIC STEEL GRADES |
EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
ISO 9327-2:1999 | Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties |
ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
ISO 16330:2003 | Reciprocating positive displacement pumps and pump units Technical requirements |
ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
ISO 683-1:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering |
ABMA 7 : 1995 | SHAFT AND HOUSING FITS FOR METRIC RADIAL BALL AND ROLLER BEARINGS (EXCEPT TAPERED ROLLER BEARINGS) CONFORMING TO BASIC BOUNDARY PLAN |
EN 12451:2012 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
EN 1561:2011 | Founding - Grey cast irons |
HI 8.1 - 8.5 : 2015 | DIRECT-ACTING (STEAM) PUMPS - FOR NOMENCLATURE, DEFINITIONS, APPLICATION, AND OPERATION |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.