|
EN 12385-4:2002+A1:2008
|
Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications
|
|
EN 13557:2003+A2:2008
|
Cranes - Controls and control stations
|
|
EN 1037:1995+A1:2008
|
Safety of machinery - Prevention of unexpected start-up
|
|
EN 13155:2003+A2:2009
|
Cranes - Safety - Non-fixed load lifting attachments
|
|
ISO 4306-1:2007
|
Cranes — Vocabulary — Part 1: General
|
|
ISO 6336-2:2006
|
Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting)
|
|
EN 60034-1:2010/corrigendum Oct. 2010
|
ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
|
|
IEC 60364-4-41:2005+AMD1:2017 CSV
|
Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
|
|
ISO 13732-1:2006
|
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
|
|
ISO 4413:2010
|
Hydraulic fluid power General rules and safety requirements for systems and their components
|
|
ISO 12488-1:2012
|
Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General
|
|
EN ISO 13850:2015
|
Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
|
|
ISO 6336-3:2006
|
Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength
|
|
ISO 1940-1:2003
|
Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances
|
|
EN 818-7:2002+A1:2008
|
Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)
|
|
ISO 606:2015
|
Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
|
|
EN 13411-3:2004+A1:2008
|
Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing
|
|
EN 12644-1:2001+A1:2008
|
Cranes - Information for use and testing - Part 1: Instructions
|
|
ISO 12100:2010
|
Safety of machinery — General principles for design — Risk assessment and risk reduction
|
|
ISO/TR 14521:2010
|
Gears Calculation of load capacity of wormgears
|
|
EN ISO 13732-1:2008
|
Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
|
|
ISO 6336-5:2016
|
Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials
|
|
EN 60204-32:2008
|
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
|
|
ISO 17893:2004
|
Steel wire ropes — Vocabulary, designation and classification
|
|
EN 13480-3:2017
|
Metallic industrial piping - Part 3: Design and calculation
|
|
EN 13001-2:2014
|
Crane safety - General design - Part 2: Load actions
|
|
ISO 6072:2011
|
Rubber Compatibility between hydraulic fluids and standard elastomeric materials
|
|
EN 13411-1:2002+A1:2008
|
Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings
|
|
ISO 4309:2010
|
Cranes Wire ropes Care and maintenance, inspection and discard
|
|
EN 61000-6-2:2005/corrigendum:2005
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
|
|
EN 13001-1:2015
|
Cranes - General design - Part 1: General principles and requirements
|
|
EN ISO 4414:2010
|
Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
|
|
ISO 10300-1:2014
|
Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors
|
|
EN 13411-4:2011
|
Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing
|
|
EN 13411-6:2004+A1:2008
|
Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
|
|
CEN/TS 13001-3-5:2010
|
Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
|
|
ISO 6336-1:2006
|
Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors
|
|
ISO 4347:2015
|
Leaf chains, clevises and sheaves Dimensions, measuring forces, tensile strengths and dynamic strengths
|
|
EN ISO 12100:2010
|
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
|
|
EN 60204-11:2000/corrigendum:2010
|
SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
|
|
ISO 10300-3:2014
|
Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
|
|
EN ISO 13849-1:2015
|
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
|
|
ISO 4414:2010
|
Pneumatic fluid power General rules and safety requirements for systems and their components
|
|
ISO 13850:2015
|
Safety of machinery Emergency stop function Principles for design
|
|
EN 818-1:1996+A1:2008
|
Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance
|
|
ISO 2943:1998
|
Hydraulic fluid power Filter elements Verification of material compatibility with fluids
|
|
EN 853:2015
|
Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
|
|
EN ISO 4413:2010
|
Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
|
|
ISO 13849-1:2015
|
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
|
|
ISO 12482-1:1995
|
Cranes Condition monitoring Part 1: General
|
|
ISO 10300-2:2014
|
Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (pitting)
|
|
CEN/TS 13001-3-2:2008
|
Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
|
|
ISO 7745:2010
|
Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use
|
|
EN 60204-1 : 2006 COR 2010
|
SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.