14/30297827 DC : 0
NA
Status of Standard is Unknown
Hardcopy , PDF
English
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test method
6 Assessment and verification of constancy of
performance - AVCP
7 Marking, Labelling and packaging
Annex A (informative) - Product characteristics possibly
affected by change of components
Annex B (normative) - Extension of test results following
the size
Annex C (informative) - Example of performance and
requirement profile of an Internal pedestrian
doorsets without resistance to fire and/or smoke
leakage characteristics
Annex D (informative) - Examples for opening dimensions of
internal pedestrian doorsets without resistance to
fire and/or smoke leakage characteristics
Annex E (informative) - Handling, installation, maintenance
and care
Annex F (normative) - Selection, preparation mounting and
fixing of test specimen for reaction to fire tests
of pedestrian doorsets and field of direct application
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Products Regulation
Annex ZB (informative) - Relationship of this European
Standard and the Essential Requirements of
EU Directive 2006/42/EC
Annex ZC (informative) - Relationship of this European
Standard and the essential Requirements of
EU Directive 2004/108/EC
Bibliography
BS EN 14351-2.
Committee |
B/538
|
DocumentType |
Draft
|
Pages |
60
|
PublisherName |
British Standards Institution
|
Status |
NA
|
Standards | Relationship |
PREN 14351-2 : DRAFT 2014 | Identical |
EN 950:1999 | Door leaves - Determination of the resistance to hard body impact |
EN 16361:2013+A1:2016 | Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation |
EN 1935:2002/AC:2003 | BUILDING HARDWARE - SINGLE-AXIS HINGES - REQUIREMENTS AND TEST METHODS |
EN 13124-2:2004 | Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test |
EN 1125:2008 | Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods |
ISO 10140-2:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation |
EN 13123-2:2004 | Windows, doors, and shutters - Explosion resistance - Requirements and classification - Part 2: Range test |
EN 1523:1998 | Windows, doors, shutters and blinds - Bullet resistance - Test method |
EN 12365-2:2003 | Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods |
EN 1627:2011 | Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification |
EN 16005:2012/AC:2015 | POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS |
EN 12400:2002 | Windows and pedestrian doors - Mechanical durability - Requirements and classification |
ISO 10140-1:2016 | Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific products |
2004/108/EC : 2004 | DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC |
ISO 140-3:1995 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements |
EN 14449:2005/AC:2005 | GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY/PRODUCT STANDARD |
EN ISO 10140-1:2016 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS (ISO 10140-1:2016) |
ISO 10077-2:2017 | Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 2: Numerical method for frames |
EN 12207:2016 | Windows and doors - Air permeability - Classification |
EN 14179-2:2005 | Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard |
PREN 16034 : DRAFT 2009 | PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTANCE AND/OR SMOKE CONTROL CHARACTERISTICS |
EN 951:1998 | Door leaves - Method for measurement of height, width, thickness and squareness |
EN 12365-1:2003 | Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification |
EN 948:1999 | Hinged or pivoted doors - Determination of the resistance to static torsion |
EN 12519:2004 | Windows and pedestrian doors - Terminology |
EN ISO 10077-2:2017 | Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2017) |
EN 1192:1999 | Doors - Classification of strength requirements |
EN 1294:2000 | Door leaves - Determination of the behaviour under humidity variations in successive uniform climates |
EN 1121:2000 | Doors - Behaviour between two different climates - Test method |
EN 13123-1:2001 | Windows, doors and shutters - Explosion resistance - Requirements and classification - Part 1: Shock tube |
ISO 12567-1:2010 | Thermal performance of windows and doors Determination of thermal transmittance by the hot-box method Part 1: Complete windows and doors |
EN 12365-3:2003 | Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method |
EN 12046-2:2000 | Operating forces - Test method - Part 2: Doors |
EN ISO 140-3:1995/A1:2004 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: LABORATORY MEASUREMENTS OF AIRBORNE SOUND INSULATION OF BUILDING ELEMENTS |
EN 947:1998 | Hinged or pivoted doors - Determination of the resistance to vertical load |
PREN 13637 : DRAFT 2014 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
EN 12150-2:2004 | Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard |
PREN 1026 : DRAFT 2013 | WINDOWS AND DOORS - AIR PERMEABILITY - TEST METHOD |
EN 13241-1:2003+A1:2011 | Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics |
EN 13124-1:2001 | Windows, doors and shutters - Explosion resistance - Test method - Part 1: Shock tube |
EN 12365-4:2003 | Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method |
EN 1629:2011+A1:2015 | PEDESTRIAN DOORSETS, WINDOWS, CURTAIN WALLING, GRILLES AND SHUTTERS - BURGLAR RESISTANCE - TEST METHOD FOR THE DETERMINATION OF RESISTANCE UNDER DYNAMIC LOADING |
EN ISO 10140-2:2010 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010) |
EN 1154:1996/A1:2002/AC:2006 | BUILDING HARDWARE - CONTROLLED DOOR CLOSING DEVICES - REQUIREMENTS AND TEST METHODS |
EN 13049:2003 | Windows - Soft and heavy body impact - Test method, safety requirements and classification |
EN 12354-3:2000 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound |
EN 12217:2015 | Doors - Operating forces - Requirements and classification |
EN 12219:1999 | Doors - Climatic influences - Requirements and classification |
EN 1630:2011+A1:2015 | PEDESTRIAN DOORSETS, WINDOWS, CURTAIN WALLING, GRILLES AND SHUTTERS - BURGLAR RESISTANCE - TEST METHOD FOR THE DETERMINATION OF RESISTANCE TO MANUAL BURGLARY ATTEMPTS |
ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
EN 1522:1998 | Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification |
EN 949:1998 | Windows and curtain walling, doors, blinds and shutters - Determination of the resistance to soft and heavy body impact for doors |
EN 14351-1:2006+A2:2016 | Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets |
ISO 10077-1:2017 | Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 1: General |
EN 1191:2012 | Windows and doors - Resistance to repeated opening and closing - Test method |
EN 1628:2011+A1:2015 | PEDESTRIAN DOORSETS, WINDOWS, CURTAIN WALLING, GRILLES AND SHUTTERS - BURGLAR RESISTANCE - TEST METHOD FOR THE DETERMINATION OF RESISTANCE UNDER STATIC LOADING |
EN 12600:2002 | Glass in building - Pendulum test - Impact test method and classification for flat glass |
EN ISO 10077-1:2017 | Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2017, Corrected version 2020-02) |
EN 179:2008 | Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.