|
EN 717-2:1994/AC:2002
|
WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 2: FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD
|
|
EN 12667:2001
|
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
|
|
EN 1264-3:2009
|
Water based surface embedded heating and cooling systems - Part 3: Dimensioning
|
|
EN 1606:2013
|
Thermal insulating products for building applications - Determination of compressive creep
|
|
EN ISO 10140-5:2010/A1:2014
|
ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT (ISO 10140-5:2010)
|
|
ISO 10140-2:2010
|
Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation
|
|
EN 1815:1997
|
Resilient and textile floor coverings - Assessment of static electrical propensity
|
|
ISO 1923:1981
|
Cellular plastics and rubbers — Determination of linear dimensions
|
|
ISO 717-2:2013
|
Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation
|
|
EN 13329:2016+A1:2017
|
Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
|
|
EN 15468:2016
|
Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods
|
|
EN 824:2013
|
Thermal insulating products for building applications - Determination of squareness
|
|
EN 717-1:2004
|
Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method
|
|
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
|
|
EN 825:2013
|
Thermal insulating products for building applications - Determination of flatness
|
|
EN ISO 717-2:2013
|
Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013)
|
|
EN 823:2013
|
Thermal insulating products for building applications - Determination of thickness
|
|
EN 12311-2:2013
|
Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing
|
|
EN 13238:2010
|
Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
|
|
EN 13793:2003
|
Thermal insulating products for building applications - Determination of behaviour under cyclic loading
|
|
EN ISO 1923 : 1995
|
CELLULAR PLASTICS AND RUBBERS - DETERMINATION OF LINEAR DIMENSIONS
|
|
EN ISO 10140-3:2010/A1:2015
|
ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 3: MEASUREMENT OF IMPACT SOUND INSULATION (ISO 10140-3:2010/AMD 1:2015)
|
|
EN 12664:2001
|
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
|
|
EN ISO 16000-9:2006/AC:2007
|
INDOOR AIR - PART 9: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - EMISSION TEST CHAMBER METHOD
|
|
EN 1991-1-1:2002/AC:2009
|
EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS
|
|
ISO 16000-9:2006
|
Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method
|
|
EN ISO 10140-2:2010
|
Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010)
|
|
EN 14909:2012
|
Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
|
|
ISO 717-1:2013
|
Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation
|
|
EN 438-2:2016
|
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
|
|
EN ISO 868:2003
|
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
|
|
EN 14978:2016
|
Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
|
|
ISO 10140-3:2010
|
Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation
|
|
ISO 10140-5:2010
|
Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment
|
|
EN 826:2013
|
Thermal insulating products for building applications - Determination of compression behaviour
|
|
EN ISO 11925-2:2010/AC:2011
|
REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
|
|
EN 12086:2013
|
Thermal insulating products for building applications - Determination of water vapour transmission properties
|
|
ISO 868:2003
|
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
|
|
EN 822:2013
|
Thermal insulating products for building applications - Determination of length and width
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.