• There are no items in your cart

2004/108/EC : 2004

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC
Superseded date

09-11-2022

Published date

01-12-2013

This Directive regulates the electromagnetic compatibility of equipment. It aims to ensure the functioning of the internal market by requiring equipment to comply with an adequate level of electromagnetic compatibility. This Directive applies to equipment as defined in Article 2.

DevelopmentNote
Supersedes 89/336/EEC (11/2005)
DocumentType
Miscellaneous Product
PublisherName
European Union
Status
Superseded
SupersededBy
Supersedes

DEFSTAN 00-972(PT1)/5(2015) : 2015 MILITARY AIR TRAFFIC SERVICES EQUIPMENT SAFETY AND PERFORMANCE STANDARDS (AERODROME, TERMINAL AND NAVAL AIR TRAFFIC SERVICES) - PART 1: GENERIC AND SOFTWARE
I.S. EN 1041:2008+A1:2013 INFORMATION SUPPLIED BY THE MANUFACTURER OF MEDICAL DEVICES
12/30257301 DC : 0 BS EN ISO 20957-1 - STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
11/30253123 DC : 0 BS EN 12016 - ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
BS EN 61326-2-4:2013 Electrical equipment for measurement, control and laboratory use. EMC requirements Particular requirements. Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
13/30252780 DC : 0 BS EN 50121-5 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS
NF EN 50491-5-2 : 2011 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY ENVIRONMENT
BS ISO 22559-1:2014 Safety requirements for lifts (elevators) Global essential safety requirements (GESRs)
BS EN 50564:2011 Electrical and electronic household and office equipment. Measurement of low power consumption
NF EN 55016-2-2 : 2011 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-2: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - MEASUREMENT OF DISTURBANCE POWER
BS EN 50561-1:2013 Power line communication apparatus used in low-voltage installations. Radio disturbance characteristics. Limits and methods of measurement Apparatus for in-home use
BS EN 61439-2:2011 Low-voltage switchgear and controlgear assemblies Power switchgear and controlgear assemblies
S.R. CLC/TR 50422:2013 GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160
EN 61326-2-5:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1
DD ISO/TS 25740-1:2011 Safety requirements for escalators and moving walks Global essential safety requirements (GESR)
NF EN 55103-1 : 2009 AMD 1 2013 ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR AUDIO, VIDEO, AUDIO-VISUAL AND ENTERTAINMENT LIGHTING CONTROL APPARATUS FOR PROFESSIONAL USE - PART 1: EMISSIONS
EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
EN 61326-2-3:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
BS EN 62423:2012 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
PD CEN/TR 15339-1:2014 Thermal spraying. Safety requirements for thermal spraying equipment General requirements
BS EN 61000-6-1:2007 Electromagnetic compatibility (EMC) Generic standards. Immunity for residential, commercial and light-industrial environments
BS EN 60730-2-7:2010 Automatic electrical controls for household and similar use Particular requirements for timers and time switches
UNE-EN 16280:2013 Breath alcohol test devices for general public - Requirements and test methods
NF EN 62026-1 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 1: GENERAL RULES
EN 303 348 : 1.1.2 INDUCTION LOOP SYSTEMS INTENDED TO ASSIST THE HEARING IMPAIRED IN THE FREQUENCY RANGE 10 HZ TO 9 KHZ; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU
CEI EN 50498 : 2013 ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT FAMILY STANDARD FOR AFTERMARKET ELECTRONIC EQUIPMENT IN VEHICLES
EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
BS EN 61000-6-3 : 2007 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
BS EN 60947-4-3:2014 Low-voltage switchgear and controlgear Contactors and motor-starters. AC semiconductor controllers and contactors for non-motor loads
EN 50561-1:2013/AC:2015 Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 1: Apparatus for in-home use
BS EN 55022:2010 Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
BS EN 50065-1:2011 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz General requirements, frequency bands and electromagnetic disturbances
I.S. EN 15714-2:2009 INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
BS ISO 13577-1:2016 Industrial furnaces and associated processing equipment. Safety General requirements
BS EN ISO 20957-10:2017 Stationary training equipment Exercise bicycles with a fixed wheel or without freewheel. Additional specific safety requirements and test methods
I.S. EN 1865-5:2012 PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES - PART 5: STRETCHER SUPPORT
NF EN 61000-4-21 : 2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-21: TESTING AND MEASUREMENT TECHNIQUES - REVERBERATION CHAMBER TEST METHODS
NF EN 55103-2 : 2009 ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR AUDIO, VIDEO, AUDIO-VISUAL AND ENTERTAINMENT LIGHTING CONTROL APPARATUS FOR PROFESSIONAL USE - PART 2: IMMUNITY
TR 102 764 : 1.1.1 EHEALTH; ARCHITECTURE; ANALYSIS OF USER SERVICE MODELS, TECHNOLOGIES AND APPLICATIONS SUPPORTING EHEALTH
EN 301 908-15 : 5.2.1 IMT CELLULAR NETWORKS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU; PART 15: EVOLVED UNIVERSAL TERRESTRIAL RADIO ACCESS (E-UTRA FDD) REPEATERS
DIN EN 12368:2015-09 TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS
DIN EN 1422:2014-08 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
BS EN 624:2011 Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats
BS EN 62026-3:2015 Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) DeviceNet
BS EN 618 : 2002
BS EN 12015:2014 Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Emission
CLC/TR 50538 : 2010 Guide to EMC Directive conformity of equipment designed for military purposes
EN 13309:2010 Construction machinery - Electromagnetic compatibility of machines with internal power supply
EN 60947-4-3:2014 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
EN 61000-6-5:2015/AC:2018-01 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT (IEC 61000-6-5:2015/COR1:2017)
EN 61547:2009 Equipment for general lighting purposes - EMC immunity requirements
EN 61439-3 : 2012 COR 2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 3: DISTRIBUTION BOARDS INTENDED TO BE OPERATED BY ORDINARY PERSONS (DBO) (IEC 61439-3:2012)
EN 50293:2012 Road traffic signal systems - Electromagnetic compatibility
EN 60947-4-2:2012 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
EN 60947-8:2003/A2:2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003/A2:2011)
EN 12368:2015 Traffic control equipment - Signal heads
EN 12779:2015 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
EN 60947-4-1 : 2010 AMD 1 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012)
EN 61131-2:2007 Programmable controllers - Part 2: Equipment requirements and tests
EN 55022:2010/AC:2011 INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008)
EN 55020:2007/A12:2016 SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 20:2006)
EN 50564:2011 Electrical and electronic household and office equipment - Measurement of low power consumption
EN 50428 : 2005 AMD 2 2009 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - COLLATERAL STANDARD - SWITCHES AND RELATED ACCESSORIES FOR USE IN HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)
EN 61326-2-1:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
EN 55013:2013/A1:2016 SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 13:2009, MODIFIED)
EN 61000-6-3:2007/A1:2011/AC:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010)
EN 55012:2007/A1:2009 VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF OFF-BOARD RECEIVERS
DEFSTAN 08-107/3(2013) : 2013 GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT
EN 302 291-2 : 1.1.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SHORT RANGE DEVICES (SRD); CLOSE RANGE INDUCTIVE DATA COMMUNICATION EQUIPMENT OPERATING AT 13,56 MHZ; PART 2: HARMONIZED EN UNDER ARTICLE 3.2 OF THE R&TTE DIRECTIVE
14/30285286 DC : 0 BS EN 14439 - CRANES - SAFETY - TOWER CRANES
NF EN 301489-1 : 2012 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES - PART 1: COMMON TECHNICAL REQUIREMENTS
13/30252765 DC : 0 BS EN 50121-1 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 1: GENERAL
BS EN 50498:2010 Electromagnetic compatibility (EMC). Product family standard for aftermarket electronic equipment in vehicles
BS EN 60268-4:2014 Sound system equipment Microphones
12/30260278 DC : 0 BS 5839-1 - FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 1: CODE OF PRACTICE FOR DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE
BS EN 62026-7:2013 Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) CompoNet
NF EN 61869-1 : 2009 INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
BS EN ISO 20957-1:2013 Stationary training equipment General safety requirements and test methods
11/30176548 DC : 0 BS 7827 - CODE OF PRACTICE FOR DESIGNING, SPECIFYING, MAINTAINING AND OPERATING EMERGENCY SOUND SYSTEMS AT SPORTS VENUES
13/30277457 DC : 0 BS EN 1776 - GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
I.S. EN 1865-3:2012 PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES - PART 3: HEAVY DUTY STRETCHER
CLC/TR 50422:2013 GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160
DEFSTAN 00-972(PT3)/5(2015) : 2015 MILITARY AIR TRAFFIC SERVICES EQUIPMENT SAFETY AND PERFORMANCE STANDARDS (AERODROME, TERMINAL AND NAVAL AIR TRAFFIC SERVICES) - PART 3: SURVEILLANCE
DIN EN 15267-4:2015-08 (Draft) AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES
13/30260741 DC : 0 BS EN 50270 - ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
10/30211850 DC : 0 BS EN 16034 - PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTANCE AND/OR SMOKE CONTROL CHARACTERISTICS
TR 103 288 : 1.1.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); REPORT OF THE CENELEC/ETSI JOINT WORKING GROUP IN RESPONSE TO THE EC LETTER ENTRP/F5/DP/MM/ENTR.F5.(2013)43164 TO THE ESOS
BS EN 61000-3-3:2013 Electromagnetic compatibility (EMC) Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
I.S. EN ISO 20957-10:2017 STATIONARY TRAINING EQUIPMENT - PART 10: EXERCISE BICYCLES WITH A FIXED WHEEL OR WITHOUT FREEWHEEL - ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS (ISO 20957-10:2017)
12/30249558 DC : 0 BS EN 14654-1 - MANAGEMENT AND CONTROL OF OPERATIONAL ACTIVITIES IN DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 1: CLEANING
BS EN 15714-2:2009 Industrial valves. Actuators Electric actuators for industrial valves. Basic requirements
PREN 14351-2 : DRAFT 2014 WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS
CSA ISO 22559-1 : 2016 SAFETY REQUIREMENTS FOR LIFTS (ELEVATORS) - PART 1: GLOBAL ESSENTIAL SAFETY REQUIREMENTS (GESRS)
14/30295940 DC : 0 BS ISO/IEC 18046-4 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 4: TEST METHODS FOR PERFORMANCE OF RFID GATES IN LIBRARIES
UNI 11518 : 2013 ETHANOL FIRED APPLIANCES - REQUIREMENTS AND TEST METHODS
BS ISO/IEC 18046-4:2015 Information technology. Radio frequency identification device performance test methods Test methods for performance of RFID gates in libraries
NF EN 55024 : 2011 AMD 1 2015 INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
EN 61326-2-2:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
BS EN 61326-2-1:2013 Electrical equipment for measurement, control and laboratory use. EMC requirements Particular requirements. Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
ISO 13577-1:2016 Industrial furnaces and associated processing equipment Safety Part 1: General requirements
NF EN 50491-5-3 : 2011 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-3: EMC REQUIREMENTS FOR HBES/BACS USED IN INDUSTRY ENVIRONMENT
BS EN 61326-2-3:2013 Electrical equipment for measurement, control and laboratory use. EMC requirements Particular requirements. Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
CEI EN 50438 : 2014 REQUIREMENTS FOR MICRO-GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH PUBLIC LOW-VOLTAGE DISTRIBUTION NETWORKS
BS PAS 67(2008) : 2008 LABORATORY TESTS TO DETERMINE THE HEATING AND ELECTRICAL PERFORMANCE OF HEAT-LED MICRO-COGENERATION PACKAGES PRIMARILY INTENDED FOR HEATING DWELLINGS
BS EN 60730-2-15:2010 Automatic electrical controls for household and similar use Particular requirements for automatic electrical air flow, water flow and water level sensing controls
BS EN 55020 : 2007 SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
EN 303 316 : 1.2.1 BROADBAND DIRECT AIR-TO-GROUND COMMUNICATIONS; EQUIPMENT OPERATING IN THE 1 900 MHZ TO 1 920 MHZ AND 5 855 MHZ TO 5 875 MHZ FREQUENCY BANDS; BEAMFORMING ANTENNAS; HARMONISED STANDARD FOR ACCESS TO RADIO SPECTRUM
TR 102 877 : 1.2.1 ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); ENERGY EFFICIENCY OF ENERGY RELATED PRODUCTS (ERPS) WITH REGARDS TO THEIR ECODESIGN REQUIREMENTS; NETWORK APPARATUS AND CUSTOMER PREMISES EQUIPMENT RELATING TO CABLE NETWORK OPERATOR'S SERVICES
UNE-EN 15267-4:2018 Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
NF EN 50498 : 2011
I.S. EN 16280:2012 BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS
BS EN 55012 : 2007 VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF OFF-BOARD RECEIVERS
NF EN 50512 : 2009 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS)
ISO/IEC 18046-4:2015 Information technology Radio frequency identification device performance test methods Part 4: Test methods for performance of RFID gates in libraries
BS EN 16361 : 2013 POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOORSETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION
UNE-EN 16327:2015 Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
CEI UNI EN 1041 : 2014 INFORMATION SUPPLIED BY THE MANUFACTURER OF MEDICAL DEVICES
CEI CLC/TR 50456 : 2008 ALARM SYSTEMS - GUIDELINES TO ACHIEVING COMPLIANCE WITH EC DIRECTIVES FOR EQUIPMENT OF ALARM SYSTEMS
NF EN 50490 : 2009 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS
PREN 12015 : DRAFT 2012 ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS ANS MOVING WALKS - EMISSION
NF EN 61547 : 2009 EQUIPMENT FOR GENERAL LIGHTING PURPOSES - EMC IMMUNITY REQUIREMENTS
I.S. ETSI EN 301489-1 V1.8.1:2009 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 1: COMMON TECHNICAL REQUIREMENTS
IEC 60268-4:2014 Sound system equipment - Part 4: Microphones
EN 62026-3:2015 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet
DIN EN 1041:2013-12 Information supplied by the manufacturer of medical devices (includes Amendment A1:2013)
DIN EN 1012-1:2011-02 Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
BS EN 13241-1 : 2003 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS
BS EN 61131-2:2007 Programmable controllers Equipment requirements and tests
BS EN 12368:2015 Traffic control equipment. Signal heads
ISO 14982:1998 Agricultural and forestry machinery Electromagnetic compatibility Test methods and acceptance criteria
BS EN 620 : 2002
EN 301 908-2 : 7.1.1 IMT CELLULAR NETWORKS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU; PART 2: CDMA DIRECT SPREAD (UTRA FDD) USER EQUIPMENT (UE)
I.S. EN 624:2011 SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS
I.S. EN 12368:2015 TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS
I.S. EN 1012-1:2010 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS
SCTE 186 : 2016 PRODUCT ENVIRONMENTAL REQUIREMENTS FOR CABLE TELECOMMUNICATIONS
DIN EN 1776:2016-05 GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
I.S. EN 13732:2013 FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE
EN 50065-1:2011 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances
I.S. EN 12779:2015 SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS
I.S. EN 1422:2014 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
DIN EN 1422:1997-11 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
EN 301 908-1 : 7.1.1 IMT CELLULAR NETWORKS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE DIRECTIVE 2014/53/EU; PART 1: INTRODUCTION AND COMMON REQUIREMENTS
BS 6739:2009 Code of practice for instrumentation in process control systems: installation design and practice
BS 5839-8:2008 Fire detection and fire alarm systems for buildings Code of practice for the design, installation, commissioning and maintenance of voice alarm systems
BS 5839-8:2013 Fire detection and fire alarm systems for buildings Code of practice for the design, installation, commissioning and maintenance of voice alarm systems
NF EN 619 : 2003 + A1 2010
VDI 3551:2011-01 Electromagnetic compatibility (EMC) in building services
BS 7827:2011 Code of practice for designing, specifying, maintaining and operating emergency sound systems at sports venues
BS EN 60974-10 : 2014 ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
BS EN 1865-3 : 2012 PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES - PART 3: HEAVY DUTY STRETCHER
EG 201 399 : 3.1.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); A GUIDE TO THE PRODUCTION OF HARMONIZED STANDARDS FOR APPLICATION UNDER THE RADIO & TELECOMMUNICATION TERMINAL EQUIPMENT DIRECTIVE 1999/5/EC (R&TTE) AND A FIRST GUIDE ON THE IMPACT OF THE RADIO EQUIPMENT DIRECTIVE 2014/53/EU (RED) ON HARMONIZED STANDARDS
I.S. EN 50438:2013 REQUIREMENTS FOR MICRO-GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH PUBLIC LOW-VOLTAGE DISTRIBUTION NETWORKS
12/30244783 DC : 0 BS EN ISO 13856-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
BS EN 50290-4-2:2014 Communication cables General considerations for the use of cables. Guide to use
12/30258326 DC : 0 BS EN 12015 - ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS ANS MOVING WALKS - EMISSION
BS EN 50293:2012 Road traffic signal systems. Electromagnetic compatibility
BS EN 50512:2009 Electrical installations for lighting and beaconing of aerodromes. Advanced visual docking guidance systems (A-VDGS)
12/30264755 DC : 0 BS ISO 22559-1 - SAFETY REQUIREMENTS FOR LIFTS (ELEVATORS) - PART 1: GLOBAL ESSENTIAL SAFETY REQUIREMENTS (GESRS)
09/30200143 DC : 0 BS EN 62080 - SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES
08/30181001 DC : DRAFT APR 2008 BS EN 50512 - ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS)
11/30243902 DC : 0 BS EN 16280 - BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS
NF EN 61000-4-22 : 2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-22: TESTING AND MEASUREMENT TECHNIQUES - RADIATED EMISSION AND IMMUNITY MEASUREMENTS IN FULLY ANECHOIC ROOMS (FARS)
BS EN 15267-4:2017 Air quality. Certification of automated measuring systems Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
CAN/CSA-ISO/IEC 18046-4:16 Information technology Radio frequency identification device performance test methods Part 4: Test methods for performance of RFID gates in libraries (Adopted ISO/IEC 18046-4:2015, first edition, 2015-12-15)
UNI EN 16280 : 2013 BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS
EN 1041:2008+A1:2013 Information supplied by the manufacturer of medical devices
BS EN 16280:2012 Breath alcohol test devices for general public. Requirements and test methods
I.S. EN 61000-6-1:2007 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
BS EN 61326-2-5:2013 Electrical equipment for measurement, control and laboratory use. EMC requirements Particular requirements. Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1
BS EN 1865-5:2012 Patient handling equipment used in road ambulances Stretcher support
TR 103 065 : 1.1.1 AERONAUTICAL COMMUNICATIONS; CLASSIFICATION OF RF-PARAMETERS OF GROUND-BASED AIR TRAFFIC MANAGEMENT-RELATED RADIO EQUIPMENT AS BEING GOVERNED BY R&TTE DIRECTIVE OR SINGLE EUROPEAN SKY (SES) INTEROPERABILITY REGULATION
TS 102 874-6 : 1.1.1 ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); EXTERNAL COMMON POWER SUPPLY FOR CUSTOMER PREMISES NETWORK AND ACCESS EQUIPMENT; PART 6: CPS TYPE 2.D IMPLEMENTATION DETAILS
BS EN 50438:2013 Requirements for micro-generating plants to be connected in parallel with public low-voltage distribution networks
13/30257892 DC : 0 BS EN 12895 - INDUSTRIAL TRUCKS - ELECTROMAGNETIC COMPATIBILITY
08/30176097 DC : 0
I.S. EN 15267-4:2017 AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES
BS EN 61000-6-3 : 2007 : INC : AMD 1 : 2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
PD CLC/ETSI/TR 103288:2016 Electromagnetic compatibility and Radio spectrum Matters (ERM); Report of the CENELEC/ETSI Joint Working Group in response to the EC letter ENTRP/F5/DP/MM/entr.f5.(2013)43164 to the ESOs
UNI EN 16327 : 2014 FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS)
16/30342969 DC : 0 BS EN ISO 20957-10 - STATIONARY TRAINING EQUIPMENT - PART 10: EXERCISE BICYCLES WITH A FIXED WHEEL OR WITHOUT FREEWHEEL, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
NF EN 60947 4-1 : 2010 AMD 1 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
UNE-EN 55011:2011 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
BS EN 60034-1:2010 Rotating electrical machines Rating and performance
BS 5839-1:2013 Fire detection and fire alarm systems for buildings Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises
PD CLC/TR 50538:2010 Guide to EMC Directive conformity of equipment designed for military purposes
12/30262929 DC : 0 BS EN 15339-1 - THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 1: GENERAL REQUIREMENTS
UNI EN 1865-5 : 2012 PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES - PART 5: STRETCHER SUPPORT
BS ISO 21789:2009 Gas turbine applications — Safety
PLUS 61400 (1st ed. pub. 2012) CSA guide to Canadian wind turbine codes and standards
CLC/TR 50456:2008 Alarm systems - Guidelines to achieving compliance with EC directives for equipment of alarm systems
PREN 12779 : DRAFT 2014 SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS
ISO/TS 19880-1:2016 Gaseous hydrogen Fuelling stations Part 1: General requirements
PD CLC/TR 50422:2013 Guide for the application of the European Standard EN 50160
EN ISO 20957-10:2017 Stationary training equipment - Part 10: Exercise bicycles with a fixed wheel or without freewheel - Additional specific safety requirements and test methods (ISO 20957-10:2017)
BS EN 55013:2013 Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement
BS EN 55011 : 2016 INDUSTRIAL, SCIENTIFIC AND MEDICAL EQUIPMENT - RADIO-FREQUENCY DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
I.S. EN ISO 20957-1:2013 STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS (ISO 20957-1:2013)
BS EN 61000-6-4 : 2007 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
NF EN 60947 5-2 : 2008 AMD 1 2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES
BS EN 61812-1:2011 Time relays for industrial and residential use Requirements and tests
EG 202 414 : 1.2.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); GUIDE TO THE DEMONSTRATION OF CONFORMITY FOR AFTER MARKET ELECTRIC/ELECTRONIC SUB-ASSEMBLIES (ESAS) TO THE MOTOR VEHICLE EMC DIRECTIVE 2004/104/EC
BS EN 16072:2015 Intelligent transport systems. ESafety. Pan-European eCall operating requirements
ISO 22559-1:2014 Safety requirements for lifts (elevators) Part 1: Global essential safety requirements (GESRs)
PREN 14654-1 : DRAFT 2012 MANAGEMENT AND CONTROL OF OPERATIONAL ACTIVITIES IN DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 1: CLEANING
TR 102 937 : 1.1.1 ECALL COMMUNICATIONS EQUIPMENT; CONFORMANCE TO EU VEHICLE REGULATIONS, R&TTE, EMC & LV DIRECTIVES, AND EU REGULATIONS FOR ECALL IMPLEMENTATION
ISO/TS 25740-1:2011 Safety requirements for escalators and moving walks — Part 1: Global essential safety requirements (GESR)
ISO 21789:2009 Gas turbine applications — Safety
DIN EN 12779:2016-03 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
18/30359998 DC : 0 BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
EN 12015:2014 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission
EN 300 330 : 2.1.1 SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT IN THE FREQUENCY RANGE 9 KHZ TO 25 MHZ AND INDUCTIVE LOOP SYSTEMS IN THE FREQUENCY RANGE 9 KHZ TO 30 MHZ; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU
EN 300 386 : 1.6.1 TELECOMMUNICATION NETWORK EQUIPMENT; ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF THE DIRECTIVE 2014/30/EU
EN 301 908-11 : 5.2.1 IMT CELLULAR NETWORKS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE DIRECTIVE 2014/53/EU; PART 11: CDMA DIRECT SPREAD (UTRA FDD) REPEATERS
EEMUA 178 : 2009 ELECTRICAL SAFETY OF INSTRUMENTS, INSTRUMENT CONTROL PANELS AND CONTROL SYSTEMS - DESIGN GUIDE
EN 301 893 : 1.8.1 5 GHZ RLAN; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU
EN 618:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
UNI EN 1012-1 : 2010 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS
EN 617:2001+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
UNI EN 1422 : 2014 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
I.S. EN 55020:2007 SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 20:2006)
BS EN 60730-2-9:2010 Automatic electrical controls for household and similar use Particular requirements for temperature sensing controls
BS EN 60947-4-1 : 2010 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
NF EN 60947-5-9 : 2008 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES
NF EN 60730-2-15 : 2010 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-15: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL AIR FLOW, WATER FLOW AND WATER LEVEL SENSING CONTROLS
NF EN 60947-3 : 2009 AMD 2 2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS
17/30352682 DC : 0 BS IEC 60268-4 ED6.0 - SOUND SYSTEM EQUIPMENT - PART 4: MICROPHONES
BS EN 60255-26:2013 Measuring relays and protection equipment Electromagnetic compatibility requirements
NF EN 60730 2-6 : 2008 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-6: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL PRESSURE SENSING CONTROLS INCLUDING MECHANICAL REQUIREMENTS
CEI CLC/TR 50422 : 2015 GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160
EN 15714-2:2009 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
BS EN 61326-2-2:2013 Electrical equipment for measurement, control and laboratory use. EMC requirements Particular requirements. Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
I.S. EN 50564:2011 ELECTRICAL AND ELECTRONIC HOUSEHOLD AND OFFICE EQUIPMENT - MEASUREMENT OF LOW POWER CONSUMPTION
UNI EN 15714-2 : 2009 INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
BS EN 60947-8:2003 Low-voltage switchgear and controlgear Control units for built-in thermal protection (PTC) for rotating electrical machines
PD CLC/TR 50456:2008 Alarm systems. Guidelines to achieving compliance with EC directives for equipment of alarm systems
BS EN 61547:2009 Equipment for general lighting purposes. EMC immunity requirements
15/30288999 DC : 0 BS 7273-4 - CODE OF PRACTICE FOR THE OPERATION OF FIRE PROTECTION MEASURES - PART 4: ACTUATION OF RELEASE MECHANISMS FOR DOORS
15/30318313 DC : 0 BS EN 15267-4 - AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCE
UNI CEI EN 1041 : 2013 INFORMATION SUPPLIED BY THE MANUFACTURER OF MEDICAL DEVICES
DIN EN 16072:2015-08 Intelligent transport systems - ESafety - Pan-European eCall operating requirements
14/30292850 DC : 0 BS EN 12779 - SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS
12/30258718 DC : 0 BS 5839-8 - FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 8: CODE OF PRACTICE FOR THE DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE OF VOICE ALARM SYSTEMS
BS EN 16327:2014 Fire-fighting. Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
DIN EN 1865-3:2015-05 PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES - PART 3: HEAVY DUTY STRETCHER
BS EN 55024 : 2010 INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
BS EN 60947-5-2 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES
SCTE 203 : 2014 PRODUCT ENVIRONMENTAL REQUIREMENTS FOR CABLE TELECOMMUNICATIONS FACILITIES - TEST METHODS
NF EN 50550 : 2011 AMD 1 2014 POWER FREQUENCY OVERVOLTAGE PROTECTIVE DEVICE FOR HOUSEHOLD AND SIMILAR APPLICATIONS (POP)
S.R. CLC/ETSI/TR 103288:2016 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); REPORT OF THE CENELEC/ETSI JOINT WORKING GROUP IN RESPONSE TO THE EC LETTER ENTRP/F5/DP/MM/ENTR.F5.(2013)43164 TO THE ESOS
I.S. EN 50498:2010
BS EN 61439-3:2012 Low-voltage switchgear and controlgear assemblies Distribution boards intended to be operated by ordinary persons (DBO)
BS EN 61000-3-2:2014 Electromagnetic compatibility (EMC) Limits. Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
UNE-EN 50498:2011 Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles
I.S. EN 50290-4-2:2014 COMMUNICATION CABLES - PART 4-2: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - GUIDE TO USE
EN 620:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials
DIN EN 13732:2013-10 Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene
BS EN 619 : 2002
BS EN 60204-31:2013 Safety of machinery. Electrical equipment of machines Particular safety and EMC requirements for sewing machines, units and systems
UNE-EN 1776:2017 Gas infrastructure - Gas measuring systems - Functional requirements
BS EN 50428 : 2005 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - COLLATERAL STANDARD - SWITCHES AND RELATED ACCESSORIES FOR USE IN HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)
BS EN 12779:2015 Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements
BS EN 1776:2015 Gas infrastructure. Gas measuring systems. Functional requirements
UNE-EN 1041:2009 Information supplied by the manufacturer of medical devices
EN 60947-5-2:2007/A1:2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES (IEC 60947-5-2:2007/A1:2012)
ISO 20957-1:2013 Stationary training equipment Part 1: General safety requirements and test methods
BS EN 12016:2013 Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Immunity
BS EN 1041 : 2008 INFORMATION SUPPLIED BY THE MANUFACTURER OF MEDICAL DEVICES
UNE-EN 12368:2015 Traffic control equipment - Signal heads
UNE-EN 624:2011 Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
EN 13241-1:2003+A1:2011 Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics
EN 16072:2015 Intelligent transport systems - ESafety - Pan-European eCall operating requirements
EN ISO 20957-1:2013 Stationary training equipment - Part 1: General safety requirements and test methods (ISO 20957-1:2013)
EN 619:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
EN 1776:2015 Gas infrastructure - Gas measuring systems - Functional requirements
EN 1865-5:2012 Patient handling equipment used in road ambulances - Part 5: Stretcher support
EN 15267-4:2017 Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
EN 1422:2014 Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods
EN ISO 14982:2009 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)
EN 1865-3:2012+A1:2015 (edition 2) Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher
EN 13732:2013 Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene
EN 16327:2014 Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
EN 624:2011 Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
EN 16280:2012 Breath alcohol test devices for general public - Requirements and test methods
UNE-EN 50564:2012 Electrical and electronic household and office equipment - Measurement of low power consumption
BS 10999:2010 Specification for distress signal units for the fire and rescue service
EG 201 730-1 : 2.1.4 TERMINALS' ACCESS TO PUBLIC TELECOMMUNICATIONS NETWORKS; APPLICATION OF THE DIRECTIVE 1999/5/EC (R&TTE), ARTICLE 4.2; GUIDELINES FOR THE PUBLICATION OF INTERFACE SPECIFICATIONS; PART 1: GENERAL AND COMMON ASPECTS
16/30336434 DC BS EN 54-27:2015 AMD 1:2016 - FIRE DETECTION AND FIRE ALARMS SYSTEMS - PART 27: DUCT SMOKE DETECTORS
TR 102 688-3 : 1.1.1 MEDIA CONTENT DISTRIBUTION (MCD); MCD FRAMEWORK; PART 3: REGULATORY ISSUES, SOCIAL NEEDS AND POLICY MATTERS
BS EN 60947-4-2:2012 Low-voltage switchgear and controlgear Contactors and motor-starters. AC semiconductor motor controllers and starters
14/30297827 DC : 0 BS EN 14351-2 - WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS
09/30194709 DC : 0 BS 10999 - SPECIFICATION FOR DISTRESS SIGNAL UNITS FOR THE FIRE AND RESCUE SERVICE
PREN 50561-2 : DRAFT 2015 POWERLINE COMMUNICATION APPARATUS USED IN LOW VOLTAGE INSTALLATIONS - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT - PART 2: APPARATUS FOR ACCESS-NETWORK USE
BS EN 61557-12:2008 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures Performance measuring and monitoring devices (PMD)
DIN EN 16327:2014-07 FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS)
EN 62423:2012 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
BS EN 61439-6:2012 Low-voltage switchgear and controlgear assemblies Busbar trunking systems (busways)
BS EN 61439-5:2015 Low-voltage switchgear and controlgear assemblies Assemblies for power distribution in public networks
BS EN 61439-4:2013 Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for construction sites (ACS)
PREN 14439 : DRAFT 2014 CRANES - SAFETY - TOWER CRANES
BS EN 61000-6-5:2015 Electromagnetic compatibility (EMC) Generic standards. Immunity for equipment used in power station and substation environment
EN 61439-2 : 2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES (IEC 61439-2:2011)
BS EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use. EMC requirements General requirements
UNE-EN 16072:2015 Intelligent transport systems - ESafety - Pan-European eCall operating requirements
TR 103 088 : 1.3.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); USING THE ETSI EN 301 489 SERIES OF EMC STANDARDS
DIN EN 1865-5:2012-09 Patient handling equipment used in road ambulances - Part 5: Stretcher support
CEN/TR 15339-1:2014 Thermal spraying - Safety requirements for thermal spraying equipment - Part 1: General requirements
NF EN 50491-5-1 : 2011 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-1: EMC REQUIREMENTS, CONDITIONS AND TEST SET-UP
EN 61326-2-4:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
UNE-EN 15714-2:2010 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
NF EN 55020 : 2007 AMD 12 2016 SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
S.R. CEN/TR 15339-1:2014 THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 1: GENERAL REQUIREMENTS
DIN EN 15714-2:2010-02 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
TR 102 554 : 1.1.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); CODE OF PRACTICE IN RESPECT OF THE CONTROL, USE AND APPLICATION OF GROUND PROBING RADAR (GPR) AND WALL PROBING RADAR (WPR) SYSTEMS AND EQUIPMENT
S.R. CLC/TR 50538:2010
TR 102 864 : 1.1.1 ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); ASSESSMENT OF CABLE EQUIPMENT WITH DIGITAL DIVIDEND; NEW ELECTRONIC COMMUNICATION NETWORKS (ECN) OPERATING IN THE UHF BAND 790 MHZ TO 862 MHZ
NF EN 55012 : 2008 AMD 1 2009 VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF OFF-BOARD RECEIVERS
I.S. EN 16327:2014 FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS)
I.S. EN 16072:2015 INTELLIGENT TRANSPORT SYSTEMS - ESAFETY - PAN-EUROPEAN ECALL OPERATING REQUIREMENTS
CEI EN 50564 : 2013 ELECTRICAL AND ELECTRONIC HOUSEHOLD AND OFFICE EQUIPMENT - MEASUREMENT OF LOW POWER CONSUMPTION
PREN 50270 : DRAFT 2013 ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
NF EN 50130-4 : 2014 AMD 1 2014 ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS
EN 300 176-1 : 2.2.1 DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT); TEST SPECIFICATION; PART 1: RADIO
UNI EN ISO 20957-1 : 2013 STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
NF EN 60034-1 : 2011 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
I.S. EN 60268-4:2014 SOUND SYSTEM EQUIPMENT - PART 4: MICROPHONES
DIN EN 624:2011-10 Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
ISO 20957-10:2017 Stationary training equipment — Part 10: Exercise bicycles with a fixed wheel or without freewheel — Additional specific safety requirements and test methods
BS EN ISO 14982:2009 Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteria
BS EN 1422:2014 Sterilizers for medical purposes. Ethylene oxide sterilizers. Requirements and test methods
UNE-EN 12779:2016 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
BS EN 13732:2013 Food processing machinery. Bulk milk coolers on farms. Requirements for performance, safety and hygiene
BS EN 1012-1:2010 Compressors and vacuum pumps. Safety requirements Air compressors
BS EN 617 : 2001
BS EN 13309:2010 Construction machinery. Electromagnetic compatibility of machines with internal power supply
BS EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies General rules
EN 12016:2013 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity
EN 61000-6-3 : 2007 : INC : AMD 1 : 2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010)
EN 60730-2-7:2010/AC:2011 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-7: PARTICULAR REQUIREMENTS FOR TIMERS AND TIME SWITCHES (IEC 60730-2-7:2008, MODIFIED)
EN 60730-2-15:2010 Automatic electrical controls for household and similar use - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls
EN 61000-3-3:2013 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION (IEC 61000-3-3:2013)
EN 61000-6-1:2007 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments
EN 61439-6 : 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 6: BUSBAR TRUNKING SYSTEMS (BUSWAYS) (IEC 61439-6:2012)
EN 61557-12:2008 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD)
EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
EN 55024 : 2010 AMD 1 2015 INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 24:2010/A1:2015)
EN 61439-5:2015/AC:2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS (IEC 61439-5:2014)
EN 60204-31:2013 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
EN 50512:2009 Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS)
EN 50498:2010 Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles
EN 50290-4-2:2014 Communication cables - Part 4-2: General considerations for the use of cables - Guide to use
EN 1012-1:2010 Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
EN 301 908-13 : 7.1.1 IMT CELLULAR NETWORKS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU; PART 13: EVOLVED UNIVERSAL TERRESTRIAL RADIO ACCESS (E-UTRA) USER EQUIPMENT (UE)
EN 61000-6-4:2007/A1:2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
EN 60034-1:2010/corrigendum Oct. 2010 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
EN 61000-3-2:2014 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
EN 60268-4:2014 Sound system equipment - Part 4: Microphones
EN 50438:2013 REQUIREMENTS FOR MICRO-GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH PUBLIC LOW-VOLTAGE DISTRIBUTION NETWORKS
EN 60255-26:2013/AC:2013 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS
EN 61812-1:2011 Time relays for industrial and residential use - Part 1: Requirements and tests
EN 60974-10:2014/A1:2015 ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS (IEC 60974-10:2014/A1:2015)
EN 61439-4:2013 Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
EN 62026-7:2013 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet
UNE-EN 1865-3:2012 Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher
EN 302 208 : 3.1.1 RADIO FREQUENCY IDENTIFICATION EQUIPMENT OPERATING IN THE BAND 865 MHZ TO 868 MHZ WITH POWER LEVELS UP TO 2 W AND IN THE BAND 915 MHZ TO 921 MHZ WITH POWER LEVELS UP TO 4 W; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE DIRECTIVE 2014/53/EU

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.