ABMA 9 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
12-18-2020
English
01-01-2015
1 Introduction
2 Symbols
3 Definitions
4 Scope
5 Radial and Angular Contact Ball Bearings
6 Thrust Ball Bearings
7 Static Safety Factor
8 Adjusted rating Life
Pertains to radial, deep groove and angular contact ball bearings with an inner ring cross-sectional raceway groove radius not larger than 0.52 D[w] and an outer ring cross-sectional raceway groove radius not larger than 0.53 D[w].
Committee |
B3
|
DocumentType |
Standard
|
Pages |
30
|
PublisherName |
American Bearing Manufacturers Association
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
ISO 76:2006 | Corresponds |
BS 5512-1:1977 | Corresponds |
ISO 281:2007 | Corresponds |
NF ISO 281 : 2007 | Corresponds |
API 681 : 1996 : R2010 | LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 616 : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
10/30227442 DC : 0 | BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS |
API 676 CHINESE : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
MIL-PRF-24751 Revision A:2004 | FANS, VANEAXIAL GAS TURBINE ENCLOSURE COOLING NAVAL SHIPBOARD |
MIL-DTL-17060 Revision G:2009 | MOTORS, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE |
API 677 : 2006 : R2010 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
ASTM F 1718 : 2001 : R2019 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
ASTM F 1718 : 2001 : R2013 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
IEEE 1566-2015 REDLINE | IEEE Standard for Performance of Adjustable-Speed AC Drives Rated 375 kW and Larger |
BS EN ISO 10442:2002 | Petroleum, chemical and gas service industries. Packaged, integrally geared centrifugal air compressors |
I.S. EN ISO 13705:2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE (ISO 13705:2012) |
ASME B73.3 : 2015 | SPECIFICATION FOR SEALLESS HORIZONTAL END SUCTION CENTRIFUGAL PUMPS FOR CHEMICAL PROCESS |
ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
ASME BTH 1 : 2017 | DESIGN OF BELOW-THE-HOOK LIFTING DEVICES |
ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
PREN ISO 13705 : DRAFT 2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE |
API 674 : 2010 : INC : ERR 1 : 2015 : R2016 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
MIL M 17060 : F | MOTORS, 60-HERTZ, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE |
ABMA 26.2 : 1994 | THIN SECTION BALL BEARINGS INCH DESIGN |
ABMA 1 : 1990 | TERMINOLOGY FOR ANTI-FRICTION BALL AND ROLLER BEARINGS AND PARTS |
IEEE 334 : 2007 | QUALIFYING CONTINUOUS DUTY CLASS 1E MOTORS FOR NUCLEAR POWER GENERATING STATIONS |
ASTM F 975 : 1986 : R1993 : EDT 1 | Specification for Auxiliary Single Stage Steam Turbines for Shipboard Use (Withdrawn 2000) |
MIL-PRF-24775 Revision A:2005 | Air Conditioning Fan Coil Units, Horizontal and Vertical Types, Naval Shipboard |
MIL-PRF-24755 Revision B:2010 | FANS, VANEAXIAL, HIGH PRESSURE, NAVAL SHIPBOARD |
API 674 : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
API 2C RUSSIAN : 2004 | SPECIFICATION FOR OFFSHORE PEDESTAL MOUNTED CRANES |
API 674 : 2010 : ERR 1 : 2014 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
ABMA 16.1 : 1988 | AIRFRAME BALL, ROLLER AND NEEDLE ROLLER BEARINGS, METRIC DESIGN |
ASTM F 1718 : 2001 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
ASTM F 998 : 2012 : R2018 | Standard Specification for Centrifugal Pump, Shipboard Use |
ASTM F 1510 : 2007 : R2013 | Standard Specification for Rotary Positive Displacement Pumps, Ships Use |
BS EN ISO 13709:2003 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
I.S. EN ISO 10440-1:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS |
ANSI/NEMA C50.41 : 2012 | POLYPHASE INDUCTION MOTORS FOR POWER GENERATION STATIONS |
API 676 REDLINE : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
API 674 REDLINE : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
04/30114086 DC : DRAFT JUL 2004 | EN ISO 10440-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS (OIL-FREE) |
API 677 :2006 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
API 611 : 2008 : R2014 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 611 : 2008 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
05/30127458 DC : DRAFT JAN 2005 | ISO 13705 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE |
API 616 REDLINE : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 619 REDLINE : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
API 560 : 2016 | FIRED HEATERS FOR GENERAL REFINERY SERVICE |
API 687 : 2001 | ROTOR REPAIR |
ABMA 10 : 1989 | METAL BALLS |
ASTM F 1718 : 2001 : R2006 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
ISO 10436:1993 | Petroleum and natural gas industries — General-purpose steam turbines for refinery service |
BS EN ISO 13705:2012 | Petroleum, petrochemical and natural gas industries. Fired heaters for general refinery service |
UNI EN ISO 10440-1 : 2008 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS |
UNI EN ISO 13705 : 2013 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE |
MIL-PRF-23798 Revision D:2004 | Air Conditioner, Fan-Coil Assembly |
JSSG-2009 Revision A:2013 | Air Vehicle Subsystems |
API 677 : 2006 : R2016 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
MIL-PRF-18953 Revision C:2005 | FANS, VANEAXIAL AND TUBEAXIAL, VENTILATION AND AIR CONDITIONING, NAVAL SHIPBOARD |
API 610 REDLINE : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
MIL-PRF-19004 Revision B:2001 | FANS, CENTRIFUGAL, VENTILATION, NAVAL SHIPBOARD |
API 674 : 2010(R2016) | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
MIL-DTL-17840 Revision D:2018 | PUMPS, CENTRIFUGAL, CLOSE-COUPLED, NAVY STANDARD (FOR SURFACE SHIP APPLICATION) |
SAE AS 22227 : 2014(S2018) | BEARING, BALL, ANNULAR, GENERATOR AND MOTOR GENERATOR |
API STD 676 : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
API 2C : 2012 | OFFSHORE PEDESTAL-MOUNTED CRANES |
API 546 : 2008 | BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
API 681 : 1996 | LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 674 : 2010 : ERR 2 : 2015 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
ABMA 16.2 : 1990 | AIRFRAME BALL, ROLLER AND NEEDLE ROLLER BEARINGS, INCH DESIGN |
API 673 : 2014 | CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 676 : 2009 : R2015 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
HI 1.3 : 2013 | ROTODYNAMIC CENTRIFUGAL PUMPS FOR DESIGN AND APPLICATION |
ASTM F 1510 : 2007 | Standard Specification for Rotary Positive Displacement Pumps, Ships Use |
I.S. EN ISO 13709:2009 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
BS EN ISO 10440-1:2001 | Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free) |
ISO 13710:2004 | Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps |
ISO 10442:2002 | Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors |
BS EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps |
ISO 13705:2012 | Petroleum, petrochemical and natural gas industries — Fired heaters for general refinery service |
ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors |
EN ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) |
EN ISO 10442:2002 | Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002) |
EN ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007) |
EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004) |
EN ISO 13705:2012 | Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service (ISO 13705:2012) |
ABMA 22.1 : 1989 | SPHERICAL PLAIN RADIAL BEARINGS, JOINT TYPE, METRIC DESIGN |
API 687 : 2001 : R2009 | ROTOR REPAIR |
API 611 REDLINE : 2008 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
11/30246055 DC : 0 | BS EN ISO 13705 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE |
ASTM F 998 : 2012 | Standard Specification for Centrifugal Pump, Shipboard Use |
API 619 : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
API 687 : 2001 : R2015 | ROTOR REPAIR |
API TR 11L6 : 2008 | TECHNICAL REPORT ON ELECTRIC MOTOR PRIME MOVER FOR BEAM PUMPING UNIT SERVICE |
HI 2.3 : 2013 | ROTODYNAMIC VERTICAL PUMPS OF RADIAL, MIXED, AND AXIAL FLOW TYPES FOR DESIGN AND APPLICATION |
IEEE 841-2009 | IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors--Up to and Including 370 kW (500 hp) |
ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.