IEEE/ANSI C63.14-2014 REDLINE
Current
Current
The latest, up-to-date edition.
American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3)
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
12-05-2014
1 Scope
2 Normative references
3 Quantities, units, multiplying factors, symbols,
and abbreviations
4 Definitions and terminology
Annex A (informative) - Glossary
Gives definition of terms associated with electromagnetic environmental effects including electromagnetic compatibility (EMC), electromagnetic pulse (EMP), and electrostatic discharge (ESD).
| DocumentType |
Standard
|
| ISBN |
978-0-7381-9320-5
|
| Pages |
152
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Current
|
| Supersedes |
| IEEE DRAFT 1309 : D2.0 2005 | CALIBRATION OF ELECTROMAGNETIC FIELD SENSORS AND PROBES, EXCLUDING ANTENNAS, FROM 9 KHZ TO 40 GHZ |
| IEEE/ANSI C63.7-2015 | American National Standard Guide for Construction of Test Sites for Performing Radiated Emission Measurements |
| MIL-STD-188-125-1 Base Document:1998 | HIGH-ALTITUDE ELECTROMAGNETIC PULSE (HEMP) PROTECTION FOR GROUND-BASED C[4]1 FACILITIES PERFORMING CRITICAL, TIME-URGENT MISSIONS PART 1 FIXED FACILITIES |
| EN 60601-1-2:2015 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| MIL-STD-1365 Revision C:2010 | GENERAL DESIGN CRITERIA FOR HANDLING EQUIPMENT ASSOCIATED WITH WEAPONS AND RELATED ITEMS |
| IEEE/ANSI C63.4-2014 | American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz |
| ANSI/AAMI/IEC 60601-1-2:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| IEEE 1031-2011 | IEEE Guide for the Functional Specification of Transmission Static Var Compensators |
| SAE J 551/1 : 2015 | PERFORMANCE LEVELS AND METHODS OF MEASUREMENT OF ELECTROMAGNETIC COMPATIBILITY OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (16.6 HZ TO 18 GHZ) |
| IEEE/ANSI C63.19-2011 REDLINE | American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids |
| AAMI TIR18:2010 | GUIDANCE ON ELECTROMAGNETIC COMPATIBILITY OF MEDICAL DEVICES IN HEALTHCARE FACILITIES |
| MIL-STD-1310 Revision H:2009 | SHIPBOARD BONDING, GROUNDING, AND OTHER TECHNIQUES FOR ELECTROMAGNETIC COMPATIBILITY, ELECTROMAGNETIC PULSE (EMP) MITIGATION, AND SAFETY |
| MIL-STD-1605 Revision A:2009 | Procedures for Conducting a Shipboard Electromagnetic Interference (EMI) Survey (Surface Ship) |
| IEEE/ANSI C63.22-2004 | American National Standard Guide for Automated Electromagnetic Interference Measurements |
| MIL-STD-469 Revision B:1996 | INTERFACE STANDARD FOR RADAR ENGINEERING INTERFACE REQUIREMENTS, ELECTROMAGNETIC COMPATIBILITY |
| MIL-PRF-49293 Revision B:2011 | RADIAC SET, AN/PDR-75 |
| MIL-HDBK-274 Revision A:2011 | ELECTRICAL GROUNDING FOR AIRCRAFT SAFETY |
| IEEE C63.16-2016 | American National Standard Guide for Electrostatic Discharge Test Methodologies and Acceptance Criteria for Electronic Equipment |
| IEEE/ANSI C63.17-2013 REDLINE | American National Standard Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices |
| IEEE 1709-2010 | IEEE Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on Ships |
| EIA IS 648 : 1996 | MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF EQUIPMENT INTENDED TO OPERATE IN SEVERE ELECTROMAGNETIC ENVIRONMENTS |
| I.S. EN 60601-1-2:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| ISO/TR 10305-2:2003 | Road vehicles Calibration of electromagnetic field strength measuring devices Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz |
| IEEE/ANSI C63.15-2010 | American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment |
| IEEE 1662-2008 | IEEE Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships |
| PD ISO/TR 16764:2003 | Lifts, escalators and passenger conveyors. Comparison of worldwide standards on electromagnetic interference/electromagnetic compatibility |
| IEEE 1309-2013 REDLINE | IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz |
| MIL-STD-462 Revision D:1993 | MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS |
| AEP-41 VOL 1 : 2004 | UNIFIED ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (UE[3]) PROTECTION, PHILOSOPHY AND METHODOLOGY |
| MIL-PRF-49185 Revision B:1997 | RADIO SET AN/GRC-103(V)3 |
| ANSI DRAFT C63.17 : D3.5 2006 | |
| ISO/TR 16764:2003 | Lifts, escalators and passenger conveyors Comparison of worldwide standards on electromagnetic interference/electromagnetic compatibility |
| IEEE 475-2000 | IEEE Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz |
| IEEE 1597.1 : 2008 | VALIDATION OF COMPUTATIONAL ELECTROMAGNETICS COMPUTER MODELING AND SIMULATIONS |
| IEC 60601-1-2:2007 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests |
| IEEE DRAFT C63.19 : 2005 | METHODS OF MEASUREMENT OF COMPATIBILITY BETWEEN WIRELESS COMMUNICATIONS DEVICES AND HEARING AIDS |
| 12/30159217 DC : 0 | BS EN 60601-1-2 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| BS EN 60601-1-2:2015 | Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard. Electromagnetic disturbances. Requirements and tests |
| SAE J 1113/1 : 2013 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES AND LIMITS FOR COMPONENTS OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (EXCEPT AIRCRAFT) (16.6 HZ TO 18 GHZ) |
| MIL-STD-188-125-2 Base Document:1999 | HIGH-ALTITUDE ELECTROMAGNETIC PULSE (HEMP) PROTECTION FOR GROUND-BASED C[4]I FACILITIES PERFORMING CRITICAL, TIME-URGENT MISSIONS - PART 2 - TRANSPORTABLE SYSTEMS |
| IEEE/ANSI C63.27-2017 | American National Standard for Evaluation of Wireless Coexistence |
| AEP-41 VOL 2 : 2004 | ELECTROMAGNETIC (EM), ENVIRONMENTS (EMES), EM ENVIRONMENTAL EFFECTS (E[3]) AND OPERATIONAL CATEGORIES (OCS) |
| IEEE/ANSI C63.5-2017 REDLINE | American National Standard for Electromagnetic Compatibility--Radiated Emission Measurements in Electromagnetic Interference (EMI) Control--Calibration and Qualification of Antennas (9 kHz to 40 GHz) |
| IEEE/ANSI C63.12-2015 REDLINE | American National Standard Recommended Practice for Electromagnetic Compatibility Limits and Test Levels |
| IEEE/ANSI C63.9-2008 | American National Standard for RF Immunity of Audio Office Equipment to General Use Transmitting Devices with Transmitter Power Levels up to 8 Watts |
| IEEE/ANSI C63.23-2012 | American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement Uncertainty |
| IEEE/ANSI C63.26-2015 | IEEE/ANSI Standard for Compliance Testing of Transmitters Used in Licensed Radio Services |
| CSA C22.2 No. 60601.1.2 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| EIA IS 647 : 1996 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE EMISSIONS AND SUSCEPTIBILITY CHARACTERISTICS OF EQUIPMENT INTENDED TO OPERATE IN SEVERE ELECTROMAGNETIC ENVIRONMENTS |
| IEEE/ANSI C63.24-2021 | American National Standard - Recommended Practice for In Situ RF Immunity Evaluation of Electronic Devices and Systems |
| IEEE/ANSI C63.30-2021 | American National Standard for Methods of Measurements of Radio-Frequency Emissions from Wireless Power Transfer Equipment |
| IEEE/ANSI/USEMCSC C63.29-2022 | American National Standard for Methods of Measurement of Radio-Frequency Emissions from Lighting Devices |
| SAE J1113/1:2023 | Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (up to 15 m), and Machines (Except Aircraft) (16.6 Hz to 18 GHz) |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO/IEC 17000:2004 | Conformity assessment Vocabulary and general principles |
| IEEE 1900.1-2008 | IEEE Standard Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management |
| MIL-STD-1541 Revision A:1987 | ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS FOR SPACE SYSTEMS |
| IEEE/ANSI C63.7-1992 | American National Standard Guide for Construction of Open-Area Test Sites for Performing Radiated Emission Measurements |
| MIL-STD-188-141 Revision C:2011 | INTEROPERABILITY AND PERFORMANCE STANDARDS FOR MEDIUM AND HIGH FREQUENCY RADIO SYSTEMS |
| IEEE C63.011-2000 | American National Standard for Limits and Methods of Measurement of Radio Disturbance Characteristics of Industrial, Scientific, and Medical (ISM) Radio-Frequency Equipment |
| MIL-STD-449 Revision D:1973 | MEASUREMENT OF RADIO FREQUENCY SPECTRUM CHARACTERISTICS |
| CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| IEEE/ANSI C63.12-1999 | American National Standard for Electromagnetic Compatibility Limits--Recommended Practice |
| IEEE/ANSI C63.9-2008 | American National Standard for RF Immunity of Audio Office Equipment to General Use Transmitting Devices with Transmitter Power Levels up to 8 Watts |
| ESD ADV1.0 : 2017 | GLOSSARY |
| MIL-STD-188-100 Base Document:1972 | COMMON LONG HAUL AND TACTICAL COMMUNICATION SYSTEM TECHNICAL STANDARDS, |
| MIL-STD-1542 Revision B:1991 | |
| IEEE 260.1 : 2004 | LETTER SYMBOLS FOR UNITS OF MEASUREMENT (SI UNITS, CUSTOMARY INCH-POUND UNITS, AND CERTAIN OTHER UNITS) |
| MIL-STD-469 Revision B:1996 | INTERFACE STANDARD FOR RADAR ENGINEERING INTERFACE REQUIREMENTS, ELECTROMAGNETIC COMPATIBILITY |
| ANSI C63.4-2009 | METHODS OF MEASUREMENT OF RADIO-NOISE EMISSIONS FROM LOW-VOLTAGE ELECTRICAL AND ELECTRONIC EQUIPMENT IN THE RANGE OF 9 KHz TO 40 GHz |
| IEEE/ANSI C63.6-1996 | American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements |
| IEEE/ANSI C63.23-2012 | American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement Uncertainty |
| CFR 47(PTS0-19) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
| IEEE/ANSI C63.15-2010 | American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment |
| MIL-STD-1377 Base Document:1971 | EFFECTIVENESS OF CABLE, CONNECTOR, AND WEAPON ENCLOSURE SHIELDING AND FILTERS IN PRECLUDING HAZARDS OF ELECTROMAGNETIC RADIATION TO ORDNANCE, MEASUREMENT OF REQUIREMENTS FOR EMPLOYING STANDARD ELECTRONIC MODULATIONS |
| IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
| MIL-STD-1605 Revision A:2009 | Procedures for Conducting a Shipboard Electromagnetic Interference (EMI) Survey (Surface Ship) |
| IEEE SI 10-1997 | IEEE/ASTM Standard for Use of the International System of Units (SI): The Modern Metric System |
| MIL-STD-464 Revision C:2010 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS |
| MIL-STD-1310 Revision H:2009 | SHIPBOARD BONDING, GROUNDING, AND OTHER TECHNIQUES FOR ELECTROMAGNETIC COMPATIBILITY, ELECTROMAGNETIC PULSE (EMP) MITIGATION, AND SAFETY |
| STANAG 3968 : 0 | NATO GLOSSARY OF AIR ELECTRICAL AND ELECTROMAGNETIC TERMINOLOGY |
| STANAG 4436 : 0 | ELECTROMAGNETIC COMPATIBILITY TESTING PROCEDURES AND REQUIREMENTS FOR NAVAL ELECTRICAL AND ELECTRONIC EQUIPMENT (SURFACE SHIP, NON-METALLIC HULL) |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| IEEE C63.2-2009 | American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications |
| IEEE/ANSI C63.12-2015 REDLINE | American National Standard Recommended Practice for Electromagnetic Compatibility Limits and Test Levels |
| MIL-HDBK-235-1 Revision C:2010 | MILITARY OPERATIONAL ELECTROMAGNETIC ENVIRONMENT PROFILES - PART 1: GENERAL GUIDANCE |
| IEEE C63.5-1998 | American National Standard for Electromagnetic Compatibility Radiated Emission Measurements in Electromagnetic Interference (EMI) Control Calibration of Antennas (9 kHz to 40 GHz) |
| IEEE/ANSI C63.2-1996 | American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz - Specifications |
| ANSI C63.5 : 2006 | ELECTROMAGNETIC COMPATIBILITY - RADIATED EMISSION MEASUREMENTS IN ELECTROMAGNETIC INTERFERENCE (EMI) CONTROL - CALIBRATION AND QUALIFICATION OF ANTENNAS (9 KHZ TO 40 GHZ) |
| IEEE/ANSI C63.22-2004 | American National Standard Guide for Automated Electromagnetic Interference Measurements |
| ISO/IEC Guide 2:2004 | Standardization and related activities General vocabulary |
| IEEE/ANSI C63.16-1993 | American National Standard Guide for Electrostatic Discharge Test Methodologies and Criteria for Electronic Equipment |
| MIL-HDBK-237 Revision D:2005 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS AND SPECTRUM SUPPORTABILITY GUIDANCE FOR THE ACQUISITION PROCESS |
| MIL-HDBK-240 Revision A:2011 | HAZARDS OF ELECTROMAGNETIC RADIATION TO ORDNANCE TEST GUIDE |
| IEEE/ANSI C63.19-2011 REDLINE | American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids |
| MIL-STD-188-125-1 Base Document:1998 | HIGH-ALTITUDE ELECTROMAGNETIC PULSE (HEMP) PROTECTION FOR GROUND-BASED C[4]1 FACILITIES PERFORMING CRITICAL, TIME-URGENT MISSIONS PART 1 FIXED FACILITIES |
| IEEE/ANSI C63.13-1991 | American National Standard Guide on the Application and Evaluation of EMI Power-Line Filters for Commercial Use |
| MIL-HDBK-274 Revision A:2011 | ELECTRICAL GROUNDING FOR AIRCRAFT SAFETY |
| IEEE/ANSI C63.17-2013 REDLINE | American National Standard Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices |
| MIL-HDBK-419 Revision A:1987 | GROUNDING, BONDING, AND SHIELDING FOR ELECTRONIC EQUIPMENTS AND FACILITIES - VOLUME 1: BASIC THEORY & VOLUME 2: APPLICATIONS |
| IEEE/ANSI C63.7-2015 | American National Standard Guide for Construction of Test Sites for Performing Radiated Emission Measurements |
US$226.91
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.