• There are no items in your cart

IEEE/ANSI C63.26-2015

Current
Current

The latest, up-to-date edition.

IEEE/ANSI Standard for Compliance Testing of Transmitters Used in Licensed Radio Services
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-15-2016

1 Overview
2 Normative references
3 Definitions and acronyms
4 Measurement instrumentation
5 Basic measurement considerations for transmitters
6 Additional test methods for transmitters in specific
  licensed radio services
7 RF repeaters, amplifiers, and boosters testing
8 Test reports
Annex A (informative) - Example of test report contents
Annex B (informative) - Pre-test site path loss
        characterization for determining radiated emissions
Annex C (informative) - Basic relationships among field
        strength, power, effective radiated power, and
        equivalent isotropically radiated power
Annex D (informative) - Broadband measurements
        considerations
Annex E (informative) - Consumer signal booster authorized
        frequency bands
Annex F (informative) - Consumer signal MSCL booster
        definitions and conditions
Annex G (informative) - Wideband consumer booster noise
        and gain limits charts
Annex H (informative) - Provider-specific consumer booster
        noise and gain limits figures
Annex I (informative) - Examples of out-of-band emission
        limits and masks
Annex J (informative) - Glossary
Annex K (informative) - Bibliography and selected source
        material

Defines methods, instrumentation, and facilities requirements for the compliance testing radio transmitters designed to operate in a licensed radio service.

DocumentType
Standard
ISBN
978-1-5044-0073-2
Pages
180
PublisherName
Institute of Electrical & Electronics Engineers
Status
Current

ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO/IEC 17000:2004 Conformity assessment Vocabulary and general principles
TIA TSB10 : F1994 INTERFERENCE CRITERIA FOR MICROWAVE SYSTEMS
CISPR 16-4-2:2011+AMD1:2014 CSV Specification for radio disturbance and immunity measuring apparatusand methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
IEEE 377 : 1980 MEASUREMENT OF SPURIOUS EMISSION FROM LAND-MOBILE COMMUNICATION TRANSMITTERS, RECOMMENDED PRACTICE FOR
CISPR 16-1-4:2010+AMD1:2012+AMD2:2017 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements
CISPR 16-1-1:2015 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
EN 302 561 : 2.1.1 LAND MOBILE SERVICE; RADIO EQUIPMENT USING CONSTANT OR NON-CONSTANT ENVELOPE MODULATION OPERATING IN A CHANNEL BANDWIDTH OF 25 KHZ, 50 KHZ, 100 KHZ OR 150 KHZ; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE DIRECTIVE 2014/53/EU
TIA 603 : E2016 LAND MOBILE FM OR PM COMMUNICATIONS EQUIPMENT MEASUREMENT AND PERFORMANCE STANDARDS
TR 102 070-1 : 1.2.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); GUIDE TO THE APPLICATION OF HARMONIZED STANDARDS TO MULTI-RADIO AND COMBINED RADIO AND NON-RADIO EQUIPMENT; PART 1: ELECTROMAGNETIC COMPATIBILITY
CISPR 16-2-1:2014 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
IEEE 1309-2013 REDLINE IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz
ATIS T1.523 : 2001
TIA TSB 88 : B2004 ADD 1 2005 WIRELESS COMMUNICATION SYSTEMS - PERFORMANCE IN NOISE AND INTERFERENCE - LIMITED SITUATIONS - RECOMMENDED METHODS FOR TECHNOLOGY - INDEPENDENT MODELING, SIMULATION, AND VERIFICATIONS
TR 100 028-1 : 1.4.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); UNCERTAINTIES IN THE MEASUREMENT OF MOBILE RADIO EQUIPMENT CHARACTERISTICS PART 1
IEEE 802.11-2016 IEEE Standard for Information technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications
IEEE/ANSI C63.23-2012 American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement Uncertainty
EN 300 330-1 : 1.8.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT IN THE FREQUENCY RANGE 9 KHZ TO 25 MHZ AND INDUCTIVE LOOP SYSTEMS IN THE FREQUENCY RANGE 9 KHZ TO 30 MHZ; PART 1: TECHNICAL CHARACTERISTICS AND TEST METHODS
IEEE C63.4-2003 IEEE Standard for Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
MIL-STD-464 Revision C:2010 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS
IEEE 1560-2005 IEEE Standard for Methods of Measurement of Radio Frequency Power Line Interference Filter in the Range of 100 Hz to 10 GHz
TIA 102.CAAA : E2016 PROJECT 25 - DIGITAL C4FM/CQPSK TRANSCEIVER MEASUREMENT METHODS
IEEE 1528-2013 REDLINE IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques
IEEE/ANSI C63.14-2014 REDLINE American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3)
EN 302 245-1 : 1.1.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); TRANSMITTING EQUIPMENT FOR THE DIGITAL RADIO MONDIALE (DRM) BROADCASTING SERVICE; PART 1: TECHNICAL CHARACTERISTICS AND TEST METHODS
TR 102 324 : 1.1.1 POWERLINE TELECOMMUNICATIONS (PLT); RADIATED EMISSIONS' CHARACTERISTICS AND MEASUREMENT METHOD OF STATE OF THE ART POWERLINE COMMUNICATION NETWORKS
IEEE 686-2008 IEEE Standard Radar Definitions
IEEE C63.2-2009 American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
IEEE C63.5-1998 American National Standard for Electromagnetic Compatibility Radiated Emission Measurements in Electromagnetic Interference (EMI) Control Calibration of Antennas (9 kHz to 40 GHz)
CISPR 16-2-3:2016 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
ANSI C63.5 : 2006 ELECTROMAGNETIC COMPATIBILITY - RADIATED EMISSION MEASUREMENTS IN ELECTROMAGNETIC INTERFERENCE (EMI) CONTROL - CALIBRATION AND QUALIFICATION OF ANTENNAS (9 KHZ TO 40 GHZ)
IEEE 802.16-2012 IEEE Standard for Air Interface for Broadband Wireless Access Systems
EN 301 908-1 : 7.1.1 IMT CELLULAR NETWORKS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE DIRECTIVE 2014/53/EU; PART 1: INTRODUCTION AND COMMON REQUIREMENTS
IEEE/ANSI C63.19-2011 REDLINE American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids
ISO 10012-1:1992 Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment
IEEE/ANSI C63.17-2013 REDLINE American National Standard Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices
TR 100 028-2 : 1.4.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); UNCERTAINTIES IN THE MEASUREMENT OF MOBILE RADIO EQUIPMENT CHARACTERISTICS PART 2
MIL-STD-463 Revision A:1977 DEFINITION AND SYSTEM OF UNITS, ELECTROMAGNETIC INTERFERENCE TECHNOLOGY

View more information
US$187.70
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.