API SPEC 11D1 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
08-27-2019
English
04-01-2015
1 Scope
2 Normative References
3 Terms and Definitions
4 Acronyms, Abbreviations, and Symbols
5 Functional Specification
6 Technical Specification
7 Supplier's/Manufacturer's Requirements
8 Repair
9 Shipment/Storage
Annex A (informative) - Use of API Monogram by
Licensees
Annex B (informative) - Requirements for HPHT
Environment Equipment
Annex C (normative) - Requirements for HPHT
Operational Tools
Annex D (informative) - Requirements for External
Flow Testing
Bibliography
Describes requirements and guidelines for packers and bridge plugs as defined herein for use in the petroleum and natural gas industry.
DevelopmentNote |
Also numbered as ISO 14310. (07/2009) Chinese version of 2ED 2009 is still available, see API 11D1 CHINESE. (08/2011) Also available in Russian translation, see API 11D1 RUSSIAN. (01/2018)
|
DocumentType |
Standard
|
Pages |
72
|
ProductNote |
NEW CHILD ERR 1 2019 IS ADDED
|
PublisherName |
American Petroleum Institute
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
15/30275410 DC : 0 | BS EN ISO 16530-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - WELL INTEGRITY - PART 1: LIFE CYCLE GOVERNANCE |
NORSOK D 007:2013 | WELL TESTING SYSTEM |
16/30292328 DC : 0 | BS ISO 27914 - CARBON DIOXIDE CAPTURE, TRANSPORTATION AND GEOLOGICAL STORAGE - GEOLOGICAL STORAGE |
BS ISO 27914:2017 | Carbon dioxide capture, transportation and geological storage. Geological storage |
ISO 27914:2017 | Carbon dioxide capture, transportation and geological storage Geological storage |
API 96 : 2013 | DEEPWATER WELL DESIGN AND CONSTRUCTION |
API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
CSA Z741 :2012 | GEOLOGICAL STORAGE OF CARBON DIOXIDE |
CSA Z741 : 2012 : R2017 | GEOLOGICAL STORAGE OF CARBON DIOXIDE |
API SPEC 19AC : 2016 | SPECIFICATION FOR COMPLETION ACCESSORIES |
ISO 812:2017 | Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness |
ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
ASTM D 297 : 2015 : REDLINE | Standard Test Methods for Rubber Products—Chemical Analysis |
ISO 1432:2013 | Rubber, vulcanized or thermoplastic Determination of low-temperature stiffening (Gehman test) |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
ISO 10893-5:2011 | Non-destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
ISO/TS 29001:2010 | Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
ASTM D 429 : 2014 : REDLINE | Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates |
API 20A : 2017 | CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
API 5CT : 2012 | CASING AND TUBING |
ISO 815-1:2014 | Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures |
ASTM D 1414 : 2015 : REDLINE | Standard Test Methods for Rubber O-Rings |
ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
ASTM D 736 : 1954 | Method of Test for Low-Temperature Brittleness of Rubber and Rubber-Like Materials (Withdrawn 1965) |
ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics |
ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
SAE AS 568 : 2014 | AEROSPACE SIZE STANDARD FOR O-RINGS |
ISO 34-1:2015 | Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces |
ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers |
API 6J : 1992 | BULLETIN ON TESTING OF OILFIELD ELASTOMERS - A TUTORIAL |
API Q1 : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
ASTM D 790 : 2017 : REDLINE | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
ISO 13665:1997 | Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections |
ASME PV CODE 5 : 2017 | BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
ASTM E 111 : 2017 : REDLINE | Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus |
BS 2M 54:1991 | Specification for temperature control in the heat treatment of metals |
ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
ISO 3601-1:2012 | Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
ASTM D 695 : 2015 : REDLINE | Standard Test Method for Compressive Properties of Rigid Plastics |
SAE AMS H 6875 : 2010 | HEAT TREATMENT OF STEEL RAW MATERIALS |
ISO 3601-3:2005 | Fluid power systems O-rings Part 3: Quality acceptance criteria |
ISO 34-2:2015 | Rubber, vulcanized or thermoplastic Determination of tear strength Part 2: Small (Delft) test pieces |
ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
ASTM D 329 : 2007 | Standard Specification for Acetone |
MIL-STD-413 Revision C:1980 | VISUAL INSPECTION GUIDE FOR ELASTOMERIC O-RINGS |
ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
ISO 12095:1994 | Seamless and welded steel tubes for pressure purposes Liquid penetrant testing |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.